getfrp

风电叶片灌注环氧 Resin EP-WT-4104A

Wind turbine blade infusion epoxyBrand：AllnexGrade：EP-WT-4104A
Ask AI about this
← Back to list
Wind turbine blade infusion epoxy resin produced by Allnex, typically applied in wind turbine blades, large-scale VARTM and similar applications.
Technical parameters
Manufacturer-stated data
Value
Heat deflection temp.101°C
Density1.15 g/cm³
Elongation at break3.9%
Flexural modulus3.3 GPa
Tensile strength79 MPa
Water absorption0.13%
Flexural strength129 MPa
Applications
Wind turbine bladesLarge-scale VARTM