getfrp

风电叶片灌注环氧 Resin EP-WT-4110C

Wind turbine blade infusion epoxyBrand：AllnexGrade：EP-WT-4110C
Ask AI about this
← Back to list
Wind turbine blade infusion epoxy resin from Allnex, typically applied in wind turbine blades, large-scale VARTM and similar applications.
Technical parameters
Manufacturer-stated data
Value
Heat deflection temp.91°C
Density1.18 g/cm³
Elongation at break3.9%
Flexural modulus3.1 GPa
Tensile strength82 MPa
Water absorption0.10%
Flexural strength135 MPa
Applications
Wind turbine bladesLarge-scale VARTM