Jiangsu ESONE New Material is a source-reviewed supplier profile for fiberglass cloth, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Jiangsu ESONE New Material Co., Ltd. supplies PTFE- and silicone-coated fiberglass fabrics, adhesive tapes and industrial belts from Taixing under the ESONE brand. Its current official catalog and the 2026 China Composites Expo directory support industrial, premium, porous, antistatic, tear-resistant, heavy-duty and one-side-coated PTFE glass fabric, silicone-coated glass cloth, PTFE fiberglass-cloth tape, and conveyor, mesh, laminated or seamless belts. GetFRP assigns the measured-demand phrase fiberglass cloth specifically to these coated fiberglass substrates; it does not relabel ESONE as a producer of raw glass roving or uncoated reinforcement fabric. The corporate history discusses a Youngsun predecessor dating to 1990 but separately states that Jiangsu ESONE was established in 2014. This legal-entity profile therefore uses 2014 and does not transfer the broader brand or affiliate history to the current company. Published certifications, capacity and global-coverage statements remain company claims until matched to current legal-entity records and certificate files.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass cloth. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu ESONE New Material Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Jiangsu ESONE New Material Fiberglass Fabrics.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu ESONE New Material Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
ESONE's official site groups its offer into PTFE glass fabric, PTFE tape, silicone fabric and PTFE industrial belts. A PTFE-coated fiberglass-fabric RFQ should define base-cloth weave and mass, finished thickness, PTFE loading, number of coating passes, surface texture, color, porosity, air permeability, release behavior, service temperature, dielectric performance, tensile and flex endurance, edge fray, usable width and roll length. Industrial, premium, porous, antistatic, tear-resistant, heavy-duty and one-side-coated constructions have different structures and should not be substituted under the generic name Teflon cloth. Heat sealing, solar lamination, rubber release, PVC-floor processing or insulation-jacket use requires the actual temperature, pressure and dwell cycle, contact material, cleaning method, life target and regulatory conditions. Silicone-coated fiberglass should specify one- or two-side coating, silicone type and loading, flame behavior, oil or chemical resistance, weathering, color, adhesion and flexibility. PTFE fiberglass-cloth tape additionally needs adhesive chemistry, peel, temperature, release liner, core and shelf life. Conveyor, mesh, laminated, seamless and fusing-machine belt projects should provide circumference, width, mesh, thickness, joint, edge reinforcement, guide, fastener, tension, speed, temperature and tracking requirements. Custom-cut or sewn parts need a controlled drawing, tolerances, sewing thread and packing. The official history traces the broader Youngsun business to 1990 but separately states that Jiangsu ESONE was established in 2014, which is the date used for this legal-entity profile. Published production scale, export coverage, management systems and compliance remain company claims because this review did not match certificate files to holder, address, scope, number and validity. Buyers should obtain current TDS, SDS, COA and any applicable food-contact or flame reports, then validate a sample in the real operating cycle.
No company-level certification is listed on this profile.
Evaluate Jiangsu ESONE New Material Co., Ltd. as a potential composite product manufacturer for fiberglass cloth, verify the public evidence and prepare a comparable RFQ.
Jiangsu ESONE New Material Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Porous PTFE-coated fiberglass fabric and release peel ply, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu ESONE New Material Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Jiangsu ESONE New Material Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Jiangsu ESONE New Material Co., Ltd. publishes Fiberglass base-cloth warping and weaving as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of PTFE-dispersion impregnation and multiple-pass coating depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Silicone-rubber coating and lamination is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Antistatic and one-side coating formulation should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Jiangsu ESONE New Material Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu ESONE New Material Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Jiangsu ESONE New Material Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Jiangsu ESONE New Material Co., Ltd.'s listed machinery can enter a line comparison when the buyer supplies a written product and process requirement. The proposal should define the complete line boundary, controls, utilities, safety, throughput, acceptance test, installation, training, spares, documentation and the responsibility for proving product quality with representative material.
Jiangsu ESONE New Material Co., Ltd.'s source record currently includes Official ESONE Website, About Jiangsu ESONE, PTFE Fabrics, Industrial PTFE-Coated Fiberglass. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company and full product entry.
Open catalogLegal-entity date and published scope.
Open catalogPTFE-coated fiberglass-fabric families.
Open catalogIndustrial coated-fabric range.
Open catalogSilicone-coated fiberglass products.
Open catalogConveyor, mesh, laminated and seamless belts.
Open catalogPublished Taixing address, phone and email.
Open catalogOrganizer source for Jiangsu ESONE exhibitor identity.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.