Compare Fiberglass Sheet Manufacturer Capabilities in China
Use this fiberglass sheet manufacturer directory to compare Chinese factories for industrial laminates, corrosion panels, electrical insulation and enclosure sheet. Match process, resin, reinforcement, thickness tolerance, surface finish and test evidence to the application before requesting production samples.
Industrial laminates, corrosion panels and electrical insulation
Compare Fiberglass Sheet sourcing evidence
Product-linked records and company-catalog candidates are labeled separately. Catalog matches are discovery leads, not confirmed offers. Check the linked profile for company roles, sources and review history. Sponsored records are identified below.
| Supplier / location | Recorded product scope | Evidence basis | Product MOQ / lead time | Source |
|---|---|---|---|---|
| F1 Composites Chongqing, China Sponsored | Fiberglass Sheet | Product-linked directory record Order-specific documents required. Profile reviewed: | MOQ: request quotation Lead time: request quotation | Company website |
| Hengshui Jrain FRP Co., Ltd. Hengshui, Hebei, China | Fiberglass Sheet | Product-linked directory record Order-specific documents required. Profile reviewed: | MOQ: request quotation Lead time: request quotation | Company website |
Product-family scope and evidence
GetFRP separates generally used engineering ranges from a supplier's commercial offer. Standards, properties and buying checks on this page define the questions for an RFQ; the linked company profiles identify the published source and the supplier- product relationship records the offer-specific evidence.
- Last editorial review
- 25 August 2026
- Supplier records linked
- 2
- Evidence status
- Rechecked per RFQ
Compare adjacent specifications before sending the RFQ
Specifications buyers and suppliers share
| Field | Typical range | Sourcing note |
|---|---|---|
| Construction | Solid laminate / pultruded / continuous panel / sandwich | Name the process or required property set. |
| Thickness | Typically 0.8–50 mm by product family | Set average and local tolerance. |
| Resin | Polyester / vinyl ester / epoxy / phenolic | Match corrosion, electrical and fire needs. |
| Surface | Smooth / textured / gelcoated / UV film / veil | Approve colour and gloss on a master sample. |
| Fabrication | Cut / drill / CNC / bonded sandwich | Define edge quality and protective film. |
| Packing | Flat crate, pallet or protected bundle | Control bow, moisture and corner impact. |
When evaluating a fiberglass sheet manufacturer, define the laminate construction and conditioning behind every mechanical, electrical, fire or corrosion value. Control usable dimensions, flatness, cut edges, colour, surface defects, batch traceability and protective packing in the same RFQ.
Fiberglass sheet is not one uniform product family. Chinese suppliers produce hand-laminated plate, pultruded flat sheet, continuous-laminated panel, compression-moulded sheet, insulation laminate and sandwich panel. Each route produces a different balance of thickness tolerance, fibre orientation, surface quality, electrical behaviour and production volume. The RFQ should therefore name the manufacturing route or required properties instead of using only the phrase “fiberglass sheet.”
Electrical laminates are commonly controlled through dielectric, flame and thermal requirements, while structural or corrosion panels are driven by resin, glass content, flexural performance and environmental exposure. Architectural panels add colour, UV stability, translucency and finish consistency. Buyers should confirm whether published values are typical or minimum, how specimens were conditioned, and whether the offered sheet is made continuously or cut from a larger moulded panel.
GetFRP matches the request against public network records for process, material, thickness range, finishing and export evidence. Engineering teams can open the company profile, review the published capability evidence and then contact the factory or submit one controlled RFQ. The final shortlist can be validated with a sample, measurement report, certificate set and packaging trial—important because flatness and corner damage often create more installation loss than the nominal sheet price suggests.
Suppliers connected to Fiberglass Sheet
Review the evidence table above to distinguish product-linked records from company-catalog candidates. Company verification does not certify every offered specification. Request current product-level documents.
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
JRain FRP is a composite-products manufacturer in Hengshui, Hebei. The company states that it has manufactured FRP products since 2008 and operates an approximately 5,000 m² workshop with winding equipment, vacuum equipment, molds, a laboratory and FRP test equipment. Its portfolio covers industrial tanks, piping and fittings, scrubbers, grating accessories, dual-laminate products, custom industrial parts and winding equipment.
Validate the material, supplier and landed cost
The terms overlap, but “laminate” usually emphasises a controlled stack of reinforcement and resin, while “sheet” may describe several continuous, pultruded or moulded products. Always compare the manufacturing process, reinforcement orientation, resin and property table rather than relying on the name.
State the measuring method, gauge locations, conditioning, maximum local variation and full-panel flatness over a defined support. For machined components, identify critical datum surfaces. A single nominal thickness without an inspection method is not enough for acceptance.
Yes, but the report must match the offered resin, reinforcement, thickness, surface and test method. Fire behaviour can change with thickness, pigment, gelcoat and filler. Ask for the complete current report and confirm that your project accepts that classification.
Approve a representative full-width or agreed-size panel with colour, gloss, texture, thickness, flatness, edge condition and key test results recorded. Keep a signed master sample and reference its revision in the purchase order and PSI checklist.