Beijing Jinghua Parker Polymerization Machinery is presented as a source-reviewed supplier profile centered on Pultrusion Machines, with company-published capability separated from buyer-side verification requirements.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd., trading as JHPK, develops and manufactures polyurethane, polyurea and composite-processing equipment. The company's official Chinese and English sites state that JHPK was established in Beijing in 2003 and opened its Handan, Hebei production base in 2017. The current portfolio covers high-pressure spray/injection equipment, HP-RTM and RTM injection systems, polyurethane-resin pultrusion and winding injection equipment, wet-molding equipment, filament-spray systems, and supporting guns, pumps and heated hoses. Published factory-scale, market-share, patent and overseas-sales figures are company statements and have not been independently verified by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Beijing Jinghua Parker Polymerization Machinery Pultrusion Machines.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. currently lists 6 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
JHPK's current English site groups its composite-relevant machinery under HP-RTM/RTM injection, pultrusion injection, wet-molding injection and filament-spray equipment. The JHPK-G20A page describes a complementary injection system for polyurethane-profile pultrusion and winding lines, publishing electric drive, digital control, output adjustment against pultrusion speed and design features for filled material systems. The service page states that selected models can ship quickly, exported equipment receives packing, chargeable installation and training are available, and the complete machine carries a one-year warranty with ongoing telephone and video support; commercial terms require confirmation in the quotation and contract. Buyers should qualify the resin chemistry, component ratio, viscosity and filler content, flow and pressure range, temperature-control accuracy, mixing and cleaning method, mold or line interfaces, control and safety architecture, destination electrical code, FAT/SAT, spares, software and electrical documentation, installation responsibility, training language, warranty exclusions and model-specific CE technical file.
Evaluate Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. as a potential composite manufacturing equipment supplier for JHPK-G20A resin-injection equipment for pultrusion machines and winding lines, verify the public evidence and prepare a comparable RFQ.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For High-pressure HP-RTM and RTM injection equipment, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Two-component wet-molding injection equipment should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. publishes Composite-injection and two-component fluid-equipment design as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Component machining and machine assembly depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Digital control, metering, heating and pressure-system integration is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Quality inspection, machine commissioning and export packing should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Beijing Jinghua Parker Polymerization Machinery Equipment Co., Ltd.'s source record currently includes JHPK Official English Website, JHPK Company History, JHPK-G20A Pultrusion and Winding Injection Equipment, JHPK-HY3 High-Pressure Spray/Injection Equipment. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 2 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-12. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Current product categories, company-published scale information, contact details and the official JHPK brand identity.
Open catalogOfficial timeline covering the founder's industry history, JHPK's 2003 establishment, the Handan production base and overseas sales statements.
Open catalogOfficial product page for a polyurethane-profile pultrusion and winding injection system.
Open catalogCompany-published product information for high-pressure polyurethane spray, injection and RTM applications.
Open catalogOfficial service statements covering dispatch, export packing, installation training, warranty and remote technical support.
Open catalogOfficial Chinese directory for equipment models, composite injection systems and company contact information.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.