Lianyungang Weide Composite Materials Facilities is presented as a source-reviewed supplier profile centered on Continuous-filament-winding FRP pipe production, with company-published capability separated from buyer-side verification requirements.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Lianyungang Weide Composite Materials Facilities Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Lianyungang Weide Composite Materials Facilities Continuous-filament-winding FRP pipe production.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Lianyungang Weide Composite Materials Facilities Co., Ltd. currently lists 12 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Weide's catalog spans five equipment routes: continuous filament winding, four-axis pressure-vessel winding, horizontal epoxy-pipe winding, centrifugal-casting GRP pipe production and FRP lighting-pole winding. The supplier also publishes feeding, conveying, loading, curing, joint-making and quality-support modules that can be combined into a line. An RFQ should identify the finished product, diameter, length and wall range, liner and laminate concept, resin, reinforcement and filler system, winding pattern and angle, target takt and annual output, number of recipes and changeover time. Define fiber-creel count and tension range, axes and positioning accuracy, mandrel or steel-band mold arrangement, resin and additive metering, sand feeding where applicable, cure profile, oven temperature and uniformity, handling, joint fabrication, dust and vapor extraction, utilities, footprint, foundation and operator staffing. A continuous-pipe line needs the band-mandrel range, inner layer, structural and sand-layer sequence, additive-manufacturing method, cut and transport logic, coupling design and online dimensional or defect checks. A hydrogen-cylinder line needs the intended cylinder type and liner, fiber path, winding-head and axis control, automatic loading and unloading, resin control, cure, serial traceability and safe handling of rejected parts. An epoxy-pipe line needs pressure class, DN range, winding and cure recipe, mandrel extraction and flange or fitting scope. A centrifugal-casting line needs mold inventory, rotational-speed and material-distribution control, heating, compaction, cooling, demolding and balance provisions. FAT should use representative raw materials to produce agreed trial articles and measure takt, recipe repeatability, layer placement, tension, metering, dimensions, cure and downtime recovery. SAT should repeat critical functions after shipment and verify utilities, guarding, interlocks, emergency stop, extraction, noise, software access, data backup and operator training. Obtain the final equipment BOM, general arrangement, control architecture, interface list, source code or escrow position where relevant, cybersecurity and remote-access rules, manuals, spare and consumable lists, preventive-maintenance schedule and service response. Separate machinery, molds and mandrels, creels, ovens, robots, environmental treatment, process know-how, installation, travel, trial materials and product qualification in the quotation. Published performance and product-quality claims do not prove that every configuration achieves the same result, and the equipment listing does not make Weide a supplier of the pipe, cylinder, pole, fiber or resin processed on it.
No company-level certification is listed on this profile.
Evaluate Lianyungang Weide Composite Materials Facilities Co., Ltd. as a potential composite manufacturing equipment supplier for Continuous-filament-winding FRP pipe production lines, verify the public evidence and prepare a comparable RFQ.
Lianyungang Weide Composite Materials Facilities Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For High-pressure hydrogen-cylinder winding production lines, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Lianyungang Weide Composite Materials Facilities Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Lianyungang Weide Composite Materials Facilities Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Lianyungang Weide Composite Materials Facilities Co., Ltd. publishes Continuous steel-band-mandrel FRP pipe winding as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Four-axis precision composite-cylinder winding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, CNC epoxy-pipe winding is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Centrifugal-casting GRP pipe forming should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Lianyungang Weide Composite Materials Facilities Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Lianyungang Weide Composite Materials Facilities Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Lianyungang Weide Composite Materials Facilities Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Lianyungang Weide Composite Materials Facilities Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Lianyungang Weide Composite Materials Facilities Co., Ltd.'s source record currently includes Official Weide Website, About Weide, Weide Product Directory, Continuous Winding Composite Equipment. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, equipment and contact entry.
Open catalogOfficial history, core lines and supporting systems.
Open catalogOfficial continuous, four-axis, horizontal, centrifugal and pole-equipment categories.
Open catalogOfficial continuous-winding production-line source.
Open catalogOfficial horizontal epoxy-pipe equipment source.
Open catalogOfficial Lianyungang address, telephone and email.
Open catalogOrganizer source for the Lianyungang Weide exhibitor.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lectra Systems (Shanghai) Co., Ltd. is the Shanghai entity published on Lectra's current China contact page, at Qinzhou North Road in Xuhui. Lectra's global Vector TechTex page describes automated cutting from low- to high-ply technical materials. Q2 and iX2 explicitly cover a diverse range including carbon fibers; iQ50 and iQ80 balance production capacity and flexibility; iX6 and iX9 address hard fabrics and high-productivity cutting. The page also publishes CAD-to-cutroom automation, nesting and material optimization, sensors and connected Industry 4.0 functions. China Composites Expo's L directory lists the Shanghai exhibitor. Carbon fiber and other composites are workpiece materials handled by the equipment, not reinforcement, prepreg, sheet or finished composite products manufactured by Lectra. GetFRP therefore excludes those material-supplier keywords. Group-product scope must not be confused with the Shanghai legal entity's exact quotation, importer, installation, software, service and warranty responsibilities, which buyers should establish contractually.