Lectra Systems (Shanghai) is presented as a source-reviewed supplier profile centered on Vector TechTex automated technical-material cutting, with company-published capability separated from buyer-side verification requirements.
Lectra Systems (Shanghai) Co., Ltd. is the Shanghai entity published on Lectra's current China contact page, at Qinzhou North Road in Xuhui. Lectra's global Vector TechTex page describes automated cutting from low- to high-ply technical materials. Q2 and iX2 explicitly cover a diverse range including carbon fibers; iQ50 and iQ80 balance production capacity and flexibility; iX6 and iX9 address hard fabrics and high-productivity cutting. The page also publishes CAD-to-cutroom automation, nesting and material optimization, sensors and connected Industry 4.0 functions. China Composites Expo's L directory lists the Shanghai exhibitor. Carbon fiber and other composites are workpiece materials handled by the equipment, not reinforcement, prepreg, sheet or finished composite products manufactured by Lectra. GetFRP therefore excludes those material-supplier keywords. Group-product scope must not be confused with the Shanghai legal entity's exact quotation, importer, installation, software, service and warranty responsibilities, which buyers should establish contractually.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Lectra Systems (Shanghai) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Lectra Systems (Shanghai) Vector TechTex automated technical-material cutting.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Lectra Systems (Shanghai) Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A Vector TechTex procurement should start from the actual material and cut job rather than a model name. State whether the input is dry carbon reinforcement, prepreg or another technical textile; give roll width, thickness, areal mass, backing, tack, stiffness, fraying behavior and compressed ply height. Provide the smallest and largest piece, geometry complexity, hole and notch detail, directional or nesting constraints, required dimensional tolerance, edge-quality acceptance, defect-zone avoidance, marker rules, identification and traceability, daily mix, takt, shift pattern and changeover expectation. This evidence should drive selection among Q2, iX2, iQ50, iQ80, iX6 and iX9 instead of assuming that every configuration handles every material and ply height. The RFQ should define usable cutting area, conveyor and collection arrangement, vacuum and material hold-down, cutting head and tools, sharpening or consumables, marking and labeling, roll handling, protective film or release-paper removal and downstream kitting. For carbon fiber, include dust and conductive-particle collection, grounding, contamination control and safe cleaning. For prepreg, include storage and out-time status, backing-paper behavior, tack, room temperature and cleaning method. Supply representative production material for trials; substitute fabric may hide cut-quality, contamination or yield problems. Software scope should identify CAD and marker formats, order import, nesting rules, job queue, recipe versioning, user roles, server or cloud architecture, licences, updates, API and machine interfaces, sensor and status data, dashboards, data ownership, retention, backup and cybersecurity. Clarify whether the Shanghai entity sells the hardware, software subscriptions, imported components, installation and local support, and which Lectra legal entity provides each warranty. FAT should reproduce agreed rolls, ply heights and parts, then measure dimensional accuracy, repeatability, edge condition, throughput, material utilization, tool life, alarm handling, restart after interruption and safety interlocks. SAT should verify footprint, power, compressed air, network, extraction, environmental conditions, guarding, emergency stop, operator workflow, training and data exchange after installation. Obtain the configuration BOM, layout, manuals, licence and renewal schedule, maintenance interval, critical spares and consumables, remote-access controls, response times and escalation path. Vector TechTex's ability to cut carbon fibers does not make Lectra a supplier of carbon fiber, prepreg, laminates or the parts cut from them, so those product-demand terms remain excluded.
No company-level certification is listed on this profile.
Evaluate Lectra Systems (Shanghai) Co., Ltd. as a potential composite manufacturing equipment supplier for Vector TechTex automated technical-material cutting systems, verify the public evidence and prepare a comparable RFQ.
Lectra Systems (Shanghai) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Vector TechTex Q2 low-ply cutting configuration, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Lectra Systems (Shanghai) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Lectra Systems (Shanghai) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Lectra Systems (Shanghai) Co., Ltd. publishes Automated technical-textile cutting as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Low-ply cutting of carbon fiber and other technical materials depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, High-ply cutting of hard technical fabrics is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating CAD-data transfer to the cutting room should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Lectra Systems (Shanghai) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Lectra Systems (Shanghai) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Lectra Systems (Shanghai) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Lectra Systems (Shanghai) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Lectra Systems (Shanghai) Co., Ltd.'s source record currently includes Official Lectra China Website, Vector TechTex, Lectra China Contact, Vector Automotive. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official China business, product and service entry.
Open catalogOfficial technical-material cutting range and configurations.
Open catalogOfficial Shanghai legal entity, address and telephone.
Open catalogOfficial automotive-material automated cutting entry.
Open catalogOfficial furniture-material automated cutting entry.
Open catalogOrganizer source for the Lectra Systems Shanghai exhibitor.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.