Danyang Yixun Machinery is presented as a source-reviewed supplier profile centered on Composite Warp-Knitting Machines, with company-published capability separated from buyer-side verification requirements.
Danyang Yixun Machinery Co., Ltd. (YIXUN Machinery) is a mainland-China equipment manufacturer in Lvcheng Town, Danyang, Jiangsu serving composite-reinforcement and technical-textile production. Its current official website dates the company to 2016 and publishes eight product series with more than 50 machinery types, including glass- and carbon-fiber multiaxial or biaxial warp-knitting machines, chopped stitch-bonding equipment, laid-scrim machines, carbon-fiber spreading equipment, warping machines, pultrusion equipment and spares. China Composites Expo lists DANYANG YIXUN MACHINERY CO., LTD. for stitch-bonding, chopping, biaxial, multiaxial and custom warp-knitting equipment. The Chinese exhibitor identity, official English identity, yixun-machine.com website, yixun-machinery.com company emails and No. 699 Shengzhi West Road address are deduplicated to this one Danyang mainland entity. Unrelated Yixun or Yixun-named businesses are excluded. The website continues to publish company and exhibition updates in 2026 and is treated as the current official company website for this review.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Danyang Yixun Machinery Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Danyang Yixun Machinery Composite Warp-Knitting Machines.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Danyang Yixun Machinery Co., Ltd. currently lists 9 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Yixun's published scope centers on warp-knitting and stitch-bonding equipment for high-performance fibers. The YRS3-3M-C carbon-fiber multiaxial page lists 50/100-inch widths, E5/E6 gauge, 50–600 r/min, adjustable +30° to -30° weft insertion, electronic take-up, servo tension-controlled batching, EBA positive let-off and 65 kW. The YRS3-M-F-I chopped-biaxial page lists 101/177-inch widths, E7, 50–1200 r/min, two bars, servo-controlled chopping and weft insertion, 31 kW and customization. The YCS spreading-machine page lists 10–20 inches, 2–20 m/min, three-roll take-up, constant-tension batching, automatic paper feeding and 12 kW. These are examples for specific web models; speed is expressly product-dependent and is not a guarantee for every fiber, width, areal weight, layer count or custom build. An RFQ should define fiber and tow or tex, sizing, package, layers, 0°/off-axis range, effective width, areal weight and uniformity, chopped length, gauge, stitching yarn, target speed, tension, downtime and scrap basis. Then freeze the creel, spreading or insertion, chopping, powder, stitching, take-up, winding, static and dust controls, automation, guarding, data interfaces and upstream/downstream boundaries. FAT should run representative glass or carbon fiber and the intended construction for an agreed sustained period, checking speed, width, weight, angle, tension, broken ends, appearance, scrap, changeover and alarms; SAT should confirm utilities, installation, training and sustained output. The website says CNC lathes, precision punches, four-axis machining centers, engraving and CMM inspection are used and annual output exceeds 220 machines. It also promotes 45 patent certificates while the company profile says more than ten invention patents. These capacity, patent and in-house-process statements require a current equipment list, legal-status check, site audit and representative-order evidence. The website's “certificate” section promotes patent counts; reviewed pages provide no verifiable current ISO management-system certificate, number, scope, certification body or validity, so this profile records no company-level certification or supported standard. English and multilingual pages, company-domain emails, WhatsApp, overseas-agent recruitment and a 2026 JEC World update support an initial export-ready flag. Buyers must still confirm exporter, destination machinery/electrical compliance, CE or technical-file responsibility, English drawings and program backups, packing, installation travel, remote-access security, spares, warranty and service. Verify email, contracting/invoicing/payment entity and bank details through a second official contact. Patent, output, global-market, model-performance and application claims require current documents, FAT/SAT and representative project evidence.
No company-level certification is listed on this profile.
Evaluate Danyang Yixun Machinery Co., Ltd. as a potential composite manufacturing equipment supplier for YRS3-3M-C carbon-fiber multiaxial warp-knitting machines, verify the public evidence and prepare a comparable RFQ.
Danyang Yixun Machinery Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For YRS3-3M multiaxial warp-knitting machines, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Danyang Yixun Machinery Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Danyang Yixun Machinery Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Danyang Yixun Machinery Co., Ltd. publishes Glass-, carbon-fiber and technical-textile warp-knitting equipment R&D and manufacture as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Multiaxial and biaxial weft-insertion and knitting-system integration depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Chopping, stitch-bonding, powder-spreading and laid-scrim integration is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Danyang Yixun Machinery Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Danyang Yixun Machinery Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Danyang Yixun Machinery Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Danyang Yixun Machinery Co., Ltd.'s source record currently includes Official Danyang Yixun Website, Official Yixun Company Profile, Official Yixun Product Directory, Official YRS3-3M-C Multiaxial Machine Page. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Current company entry, product range, 2026 updates and public contacts.
Open catalogIdentity, warp-knitting and stitch-bonding focus, experience and company-published patent statements.
Open catalogWarp-knitting, pultrusion, warping and spare-parts directory.
Open catalogCompany-published width, gauge, speed, insertion, take-up, let-off and power examples.
Open catalogCompany-published composite-textile configuration, chopping, insertion and parameter examples.
Open catalogCompany-published spreading use, width, speed, take-up and paper-feed examples.
Open catalogDanyang address, company-domain emails and two public telephone contacts.
Open catalogOrganizer-published English identity and stitch-bonding, biaxial and multiaxial equipment scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.