Dezhou JunTeng Material Technology is presented as a source-reviewed supplier profile centered on Carbon Fiber Reinforcement Products, with company-published capability separated from buyer-side verification requirements.
Dezhou JunTeng Material Technology Co., Ltd. is a mainland-China carbon-fiber textile and carbon-carbon composite supplier in Dezhou, Shandong. Its current export website, established bilingual dzjunteng.com site and China Composites Expo entry identify the same 2008-founded business. The current qualification images use the Chinese legal name, while the English sites and exhibition use the Co., Ltd. form; GetFRP deduplicates those names and both official domains as one supplier. The company claims more than 30 employees, seven R&D staff, over 30 production lines, annual fabric capacity above 1 million square metres and an internal laboratory. CCE has stated more than 40 employees. No site audit or line-level capacity record was obtained, so headcount, equipment and capacity remain company claims.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for materials engineers and converters evaluating reinforcement form, sizing compatibility, package quality and downstream process stability. It organizes Dezhou JunTeng Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Dezhou JunTeng Material Technology Carbon Fiber Reinforcement Products.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Dezhou JunTeng Material Technology Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
JUN TENG's catalog covers reinforcement fabrics, woven carbon textiles and carbon-carbon materials. Its reinforcement page lists 200 and 300 g/m² unidirectional fabric and company-described Grade I/II options, claiming above 3,400 MPa tensile strength and at least 230 GPa modulus for Grade I. No type-test report or lot guarantee appears beside those claims; define fiber grade, tow, mass, geometry, surface treatment, resin and test method, then obtain reports and lot COAs. A 300 g/m² 6K 2×2 twill page publishes 300±4 g/m², about 0.30 mm dry thickness, 500/1,000 mm stock widths, 10–1,500 mm custom width, ≥3,300 MPa tensile strength and ≥220 GPa modulus. These are catalog values. The page warns that bidirectional twill cannot replace unidirectional primary structural reinforcement, while its category table inconsistently labels standard rows as plain weave. Require the exact weave, tow, count, width, test direction and datasheet. Woven textiles and structural adhesives require product-specific handling, compatibility, cure, interface and aging evidence. Carbon-carbon parts require density, ash, directional strength, service atmosphere, protection, dimensions and cleanliness. Figures such as ±0.02 mm, 2,200°C, ≤550 ppm ash and 1,300-plus thermal-shock cycles need part-specific evidence. The site claims ISO 9001, ISO 14001 and ISO 45001, but displayed certificates 00221Q28354R1S, 00221E34973R1S and 00221S24399R1S expired on December 10, 2024. Displayed SME and credit awards are also expired. High-tech certificate GR202337005133 remains within its three-year term and matches the national 2023 Shandong filing; it is not product approval. CCE tags prepreg, but no clear current prepreg product page was found, so prepreg is not listed here. English contact channels support basic export communication, not completed qualification. Confirm the contracting entity, payee, factory and export party before ordering.
Evaluate Dezhou JunTeng Material Technology Co., Ltd. as a potential composite reinforcement supplier for 200 g/m² and 300 g/m² unidirectional carbon-fiber reinforcement fabrics (company catalog), verify the public evidence and prepare a comparable RFQ.
Dezhou JunTeng Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For 1K–12K plain-, twill- and satin-weave bidirectional carbon-fiber fabrics, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Dezhou JunTeng Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Dezhou JunTeng Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Dezhou JunTeng Material Technology Co., Ltd. publishes Unidirectional carbon-fiber reinforcement production and bidirectional weaving as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Dornier and 747 loom production (company claim) depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Plain, twill, satin, Jacquard and hybrid weaving is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Dezhou JunTeng Material Technology Co., Ltd.'s listed reinforcement products may be relevant to corrosion-sensitive concrete or civil works. Buyers should state fiber type, nominal area, guaranteed tensile property, modulus, bond surface, bend geometry, test method, design code, lot traceability and packaging. FRP reinforcement should not be specified or handled as if it were interchangeable with steel.
Dezhou JunTeng Material Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Dezhou JunTeng Material Technology Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Dezhou JunTeng Material Technology Co., Ltd.'s source record currently includes Official JUN TENG Export Website, Official JUN TENG Company Profile, Official JUN TENG Qualification Gallery, Official Carbon-Fiber Reinforcement Catalog. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 1 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Changzhou Tianma Group Co., Ltd. is based in Xinbei District, Changzhou, Jiangsu. Both the official website and China Composites Expo identify this legal entity, while the website also notes its former identity as Building Materials Factory 253. The site traces the enterprise lineage to a state-planned project begun in 1960 and calls the business the cradle of China's FRP industry; 1960 is therefore presented here as the start of the organizational lineage, not the current legal entity's registration date. The published portfolio spans glass-fiber yarns and products, unsaturated polyester and vinyl ester resins, gelcoats and auxiliaries, SMC/BMC, finished FRP products, and wind-energy and photovoltaic composites. China Composites Expo lists the exhibitor as CHANGZHOU TIANMA GROUP CO., LTD. and publishes booth 7M06 for 2026. History, industry-position, scale, capacity, market and product-performance statements are company- or organizer-published and have not been independently verified by GetFRP.
China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.
Zhongfu Shenying Carbon Fiber Co., Ltd. was established in 2006 and is part of China National Building Material Group. The company develops, manufactures and sells carbon fiber and carbon-fiber composite materials, and was listed on the Shanghai Stock Exchange in 2022 under stock code 688295.
Official product catalogs, web directories and technical guides published by the supplier.
Current English identity, product catalog, contact details and international inquiry path.
Open catalogCompany-published 2008 history, workforce, site, production-line, capacity and product claims.
Open catalogSource images for the high-tech certificate, historical ISO certificates and expired SME and credit awards.
Open catalogUnidirectional and bidirectional fabrics, 200/300 g/m² selection guidance and structural adhesives.
Open catalogCompany specification values, widths, process notes and explicit primary-structural-use limitation.
Open catalogCarbon-carbon plates, fasteners, insulation and drawing-based custom shapes.
Open catalogTelephone, company-domain email, WhatsApp and production address.
Open catalogCross-check for the English identity, 2008 history, weaving equipment and established product catalog.
Open catalogExhibitor identity, booth 6W12, material scope and application fields.
Open catalogNational recognition-portal filing used to cross-check certificate GR202337005133.
Open catalog