LEUCO Precision Tooling (Taicang) is presented as a source-reviewed supplier profile centered on Solid-carbide routers for composite processing, with company-published capability separated from buyer-side verification requirements.
LEUCO Precision Tooling (Taicang) Co., Ltd. is LEUCO's precision-tooling entity in China. Both the China Composites Expo record and LEUCO's official composite-processing solution support routers, drills, countersinks, saw blades, tool holders and custom tooling for machining CFRP, GFRP and AFRP, using uncoated or coated carbide and DP or PCD diamond edges. The official page also identifies diamond-tipped end mills, p-System cutters and drill bits with a patented entry geometry. CFRP, GFRP and AFRP are workpiece materials, not composite products manufactured by LEUCO. GetFRP therefore excludes carbon-fiber, fiberglass, sheet and other workpiece-material supplier phrases from this equipment page. Official LEUCO pages show more than one Taicang address variant, so the contracting, audit, invoice, receiving and dispatch location should be confirmed before an order. No company founding year, management-system certificate, tool-life guarantee or material-specific machining result is presented as independently verified.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes LEUCO Precision Tooling (Taicang) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “LEUCO Precision Tooling (Taicang) Solid-carbide routers for composite processing.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
LEUCO Precision Tooling (Taicang) Co., Ltd. currently lists 9 product or service groups and 9 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
LEUCO's official composite-processing solution covers routing, sawing, drilling, countersinking, reaming, tool holding and application-specific tooling. An RFQ should provide the actual CFRP, GFRP, AFRP, sandwich panel or hybrid material, including matrix, reinforcement architecture and orientation, cured state, thickness, surface layers, core, inserts and any conductive-dust or health constraints. Add the part drawing, hole and edge features, dimensional and geometric tolerances, machine and spindle interface, available rpm, feed, power, runout, tool-change arrangement, extraction and cooling or dry-machining restrictions. Acceptance criteria should define edge fuzz, fiber pull-out, delamination, breakout, splintering, burr, heat damage, hole diameter and cylindricity, countersink angle and depth, surface finish, positional tolerance, cycle time and the method used to evaluate usable tool life. Carbide, coated carbide, diamond-coated, DP or PCD cutting edges and different rake, helix or entry geometries are not interchangeable merely because each is listed for composites. Require a representative trial that records material batch, support and clamping, tool identifier, runout, rpm, feed, depth and width of cut, entry and exit strategy, extraction, measured quality, wear and failure mode. For saw blades, define diameter, kerf, bore, tooth form and count, hook angle, flange, line speed, panel support and cut direction. For routers and p-System cutters, define shank, cutting diameter and length, flute count, handedness, ramping and nesting duty. For drills, countersinks and reamers, identify stack order, backing, one-shot or multi-step operation and entry/exit quality. Tool-holder scope should address interface, balance grade, clamping torque, pullout control and measured assembly runout. Buyers should request the current item drawing, recommended starting parameters, safety and dust guidance, inspection record, traceability and packaging, then separate standard catalog tools, custom engineering, trial work, holders, spares, regrinding or replacement policy and on-site support in the quotation. The official Chinese composite page and other global contact pages show different Taicang street-address variants; confirm the active legal, invoice, audit, receiving and shipping locations directly with LEUCO. Tool descriptions establish machining capability only and do not turn the cut carbon or glass composite into a LEUCO-manufactured product, so no material-supplier search keyword is assigned.
No company-level certification is listed on this profile.
Evaluate LEUCO Precision Tooling (Taicang) Co., Ltd. as a potential composite manufacturing equipment supplier for Solid-carbide routers for composite processing, verify the public evidence and prepare a comparable RFQ.
LEUCO Precision Tooling (Taicang) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Diamond-coated routers for composite processing, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by LEUCO Precision Tooling (Taicang) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask LEUCO Precision Tooling (Taicang) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for p-System high-precision cutters should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare LEUCO Precision Tooling (Taicang) Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
LEUCO Precision Tooling (Taicang) Co., Ltd. publishes CFRP, GFRP and AFRP routing as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Composite-panel sawing and sizing depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Composite drilling, countersinking and reaming is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Carbide and diamond-coated tool selection should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. LEUCO Precision Tooling (Taicang) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
LEUCO Precision Tooling (Taicang) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
LEUCO Precision Tooling (Taicang) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
LEUCO Precision Tooling (Taicang) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
LEUCO Precision Tooling (Taicang) Co., Ltd.'s source record currently includes Official LEUCO China Website, Composite Processing, About LEUCO, LEUCO Media Downloads. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official China company, product and service entry.
Open catalogOfficial CFRP, GFRP and AFRP tooling and application source.
Open catalogOfficial group and precision-tooling overview.
Open catalogOfficial catalog and technical-document entry.
Open catalogOrganizer source for the Taicang entity and composite-cutting tool scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.