Nanjing Mingfeng Composite Materials is a source-reviewed supplier profile for fiberglass rod, fiberglass grating, and pultruded, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Nanjing Mingfeng Composite Materials Co., Ltd. says on its official website that it was founded in 2002 and manufactures pultruded and molded fiberglass products. The current catalog explicitly lists round and rectangular tube, rod, channel, I-beam, molded and pultruded grating, insulation ladders, tool handles, epoxy fiberglass rod, guardrail, flagpole, greenhouse support and other custom products. The China Composites Expo N directory also supports the exhibitor identity and its profile, tube, grating, ladder, handle, radome and molded-part scope. GetFRP maps fiberglass grating, pultruded fiberglass profiles and fiberglass-reinforced pipe demand only to those actual catalog items. Educational articles on the site discuss broader FRP applications such as tanks, cooling towers and flues; they are not treated as proof that Mingfeng currently manufactures every discussed product.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass rod, fiberglass grating, pultruded, and FRP grating. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Nanjing Mingfeng Composite Materials Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nanjing Mingfeng Composite Materials Pultruded fiberglass (GFRP) round and rectangular.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nanjing Mingfeng Composite Materials Co., Ltd. currently lists 12 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A Mingfeng inquiry should identify whether the requirement is a pultruded profile, molded grating, assembled pultruded grating, ladder, tool handle, guardrail, flagpole, epoxy rod, radome or custom molded part. Provide a controlled section or assembly drawing, resin chemistry, glass reinforcement and architecture, nominal fiber content, veil and surface finish, pigment and color, fire, electrical, UV, chemical and temperature duty, section tolerances, straightness and twist, cut length, holes, slots, bonded or mechanical inserts and end sealing. A grating RFQ should define molded or pultruded construction, mesh, panel size and thickness, bearing direction, support span, concentrated and distributed loads, allowable deflection, solid or grit top, cover plate, cutouts, clips, edge treatment and installation environment. Ladder and electrical-insulation programs should state the destination standard, voltage and wet/dry test, rail and rung construction, metal hardware, duty rating, dimensional and cyclic tests, labeling and user instructions. Tool-handle programs need the mating geometry, bending and impact load, pull-out or torque requirement, surface grip, exposure and assembly method. For radomes and molded parts, specify RF or dielectric requirements where applicable, laminate or molding route, tooling responsibility, cosmetic class, inserts, first article and dimensional inspection. Request the exact resin and reinforcement description, drawing, product datasheet, current test reports matching the offered construction, traceable batch record, certificate-of-analysis or inspection record, sample or first article, packaging and change-notification policy. The official site contains educational pages about many possible FRP applications; those pages do not expand the supplier's actual offer beyond the published product catalog. Its historical ISO, RoHS and PAHS references are not entered as verified certifications until current entity-, site-, scope- and validity-matched documents are reviewed.
No company-level certification is listed on this profile.
Evaluate Nanjing Mingfeng Composite Materials Co., Ltd. as a potential composite product manufacturer for fiberglass rod, verify the public evidence and prepare a comparable RFQ.
Nanjing Mingfeng Composite Materials Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Pultruded fiberglass (GFRP) rods, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nanjing Mingfeng Composite Materials Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nanjing Mingfeng Composite Materials Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Nanjing Mingfeng Composite Materials Co., Ltd. publishes Continuous fiberglass-profile pultrusion as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Molded FRP grating production depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Pultruded grating assembly is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Cut-to-length tube, rod, beam and channel manufacture should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Nanjing Mingfeng Composite Materials Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nanjing Mingfeng Composite Materials Co., Ltd.: A radome RFQ should define frequency bands, transmission loss, reflection, dielectric properties, antenna clearance, section drawing, material, finish, wind and ice loads, UV and weather exposure, mounting, drainage and dimensional tolerance. Require representative radio-frequency, mechanical and environmental test evidence for the offered construction rather than a generic material statement.
Nanjing Mingfeng Composite Materials Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Nanjing Mingfeng Composite Materials Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Nanjing Mingfeng Composite Materials Co., Ltd.'s source record currently includes Official Mingfeng Website, Mingfeng About Us, Mingfeng Product Center, Pultruded FRP Grating. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company and product entry.
Open catalogOfficial founding year and product scope.
Open catalogOfficial profile, grating, ladder and product directory.
Open catalogOfficial specification and construction source.
Open catalogOfficial Nanjing and Chuzhou contact information.
Open catalogOrganizer source for exhibitor identity and product scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Nantong Jiusheng New Materials Technology Co., Ltd. publishes a POWERGRID portfolio of molded fiberglass-reinforced plastic grating, pultruded fiberglass grating, pultruded structural profiles, compression-molded and hand-lay-up FRP products, product molds and grating installation accessories. Its current site exposes mesh dimensions, surface options, mechanical and corrosion tables and installation content, while the official company profile gives a founding date of 16 April 1998. The second page of the China Composites Expo N directory independently lists Nantong Jiusheng. GetFRP therefore assigns demand phrases such as fiberglass grating, FRP grating and pultruded fiberglass only to the corresponding published products. Industrial, municipal, building, water-treatment and power-project examples illustrate use; they do not expand the catalog into every structure shown in a case study or replace project engineering and acceptance evidence.