Nantong Jiusheng New Materials Technology is a source-reviewed supplier profile for fiberglass panels, fiberglass grating, and pultruded, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Nantong Jiusheng New Materials Technology Co., Ltd. publishes a POWERGRID portfolio of molded fiberglass-reinforced plastic grating, pultruded fiberglass grating, pultruded structural profiles, compression-molded and hand-lay-up FRP products, product molds and grating installation accessories. Its current site exposes mesh dimensions, surface options, mechanical and corrosion tables and installation content, while the official company profile gives a founding date of 16 April 1998. The second page of the China Composites Expo N directory independently lists Nantong Jiusheng. GetFRP therefore assigns demand phrases such as fiberglass grating, FRP grating and pultruded fiberglass only to the corresponding published products. Industrial, municipal, building, water-treatment and power-project examples illustrate use; they do not expand the catalog into every structure shown in a case study or replace project engineering and acceptance evidence.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass panels, fiberglass grating, pultruded, and FRP grating. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Nantong Jiusheng New Materials Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nantong Jiusheng New Materials Technology FRP Grating.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nantong Jiusheng New Materials Technology Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A grating RFQ should state whether the requirement is molded or pultruded construction and include a controlled panel, support and cut-out drawing. Define resin chemistry and corrosion exposure, glass reinforcement, nominal panel size, mesh opening and pitch, bearing-bar depth and thickness, span and support width, uniformly distributed and concentrated loads, allowable deflection, impact, fatigue and service temperature. Identify the required top surface, grit or meniscus treatment, slip-resistance method, color, UV exposure, flame and smoke duty, electrical behavior and any hygiene or fire-code restrictions. Specify dimensional tolerances, cut panels, openings, notches, sealed edges, kick plates, clips, fasteners, support frames, field cutting, installation and inspection. A pultruded profile inquiry should additionally include section geometry, longitudinal and transverse properties, straightness, twist, cut length, holes, inserts and connection design; do not substitute molded-grating tables for pultruded-profile values. For compression-molded or hand-lay-up parts, provide laminate or molding-compound architecture, tooling responsibility, surface class, inserts, draft, dimensional control, first-article and production inspection. Request current grade data, resin and reinforcement identification, test methods, lot definition, traceability, CoA example, packing supports, container plan and change control. Jiusheng's website mentions ISO 9001:2000, ASTM E84 and classification-society testing, but a historical standard edition or marketing statement is not a current certificate or product approval. GetFRP leaves certification arrays empty until legal entity, production site, report or certificate number, product construction, test method, scope and validity are matched. Buyers should also verify which entity manufactures, quotes, invoices and exports, and should have the final structural layout, support, connection, fire, corrosion and installation design reviewed for the actual project rather than relying on a generic website table.
No company-level certification is listed on this profile.
Evaluate Nantong Jiusheng New Materials Technology Co., Ltd. as a potential composite product manufacturer for fiberglass panels, verify the public evidence and prepare a comparable RFQ.
Nantong Jiusheng New Materials Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Pultruded fiberglass-reinforced plastic (FRP) grating, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nantong Jiusheng New Materials Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nantong Jiusheng New Materials Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Nantong Jiusheng New Materials Technology Co., Ltd. publishes Fiberglass grating molding as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Continuous pultrusion of fiberglass grating depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Pultrusion of fiberglass structural profiles is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating FRP compression molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Nantong Jiusheng New Materials Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nantong Jiusheng New Materials Technology Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Nantong Jiusheng New Materials Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Nantong Jiusheng New Materials Technology Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Nantong Jiusheng New Materials Technology Co., Ltd.'s source record currently includes Official Jiusheng Website, Jiusheng Company Profile, Jiusheng Product Directory, Molded Grating. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, product and contact entry.
Open catalogOfficial entity, founding date and product scope.
Open catalogOfficial grating, profile, molded-part and mold directory.
Open catalogOfficial molded-grating specifications and technical entry.
Open catalogOfficial pultruded-grating dimensions and corrosion entry.
Open catalogOfficial pultruded-profile specifications entry.
Open catalogOfficial Nantong address, phone and email.
Open catalogOrganizer source for the Nantong Jiusheng exhibitor.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.
Nanjing Mingfeng Composite Materials Co., Ltd. says on its official website that it was founded in 2002 and manufactures pultruded and molded fiberglass products. The current catalog explicitly lists round and rectangular tube, rod, channel, I-beam, molded and pultruded grating, insulation ladders, tool handles, epoxy fiberglass rod, guardrail, flagpole, greenhouse support and other custom products. The China Composites Expo N directory also supports the exhibitor identity and its profile, tube, grating, ladder, handle, radome and molded-part scope. GetFRP maps fiberglass grating, pultruded fiberglass profiles and fiberglass-reinforced pipe demand only to those actual catalog items. Educational articles on the site discuss broader FRP applications such as tanks, cooling towers and flues; they are not treated as proof that Mingfeng currently manufactures every discussed product.