Anhui Anche New Material is presented as a source-reviewed supplier profile centered on FRP Wall Panels, with company-published capability separated from buyer-side verification requirements.
Anhui Anche New Material Co., Ltd. uses the ANCHE brand and presents its composite-material business through the official EastFRP.com website. The company states that its Xuancheng, Anhui factory covers approximately 20,000 m² and operates two lines for FRP production. Its published range includes FRP wall panels for building and clean-space interiors, flat sheets for refrigerated trucks, RVs and other transport bodies, embossed decorative sheets, corrugated cooling-tower panels, and SMC/BMC-molded electrical enclosures and other composite parts.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Anhui Anche New Material Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Anhui Anche New Material FRP Wall Panels.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Anhui Anche New Material Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Anche's FRP wall-panel and flat-sheet pages describe a construction using a gel-coat surface, fiberglass mat or woven-roving reinforcement and a prepared backing surface. The company publishes generic options of 1.0–3.5 mm thickness, widths up to 2,800 mm, lengths up to 100 m per roll and custom colors. The same pages show typical tensile, flexural, water-absorption, impact and Barcol-hardness values and cite methods including GB/T 1447-2005, GB/T 1449-2005, GB/T 1462-2005 and GB/T 1451-2005, but do not attach complete downloadable reports traceable to a specific grade and batch. Buyers should therefore fix the resin and gel coat, reinforcement construction, fire or food-contact requirement, thickness and flatness tolerances, color and texture standard, sheet or roll dimensions, secondary fabrication, packing, MOQ and lead time in the RFQ, then request the matching TDS, approved sample, test reports and current management-system certificates. Product names such as “fire-resistant” should not be treated as a verified rating without the tested construction, standard, report and application scope.
No company-level certification is listed on this profile.
Evaluate Anhui Anche New Material Co., Ltd. as a potential composite product manufacturer for FRP wall panels and fiberglass-reinforced plastic flat sheets for commercial interiors, clean spaces and industrial buildings, verify the public evidence and prepare a comparable RFQ.
Anhui Anche New Material Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For FRP flat sheets for refrigerated trucks, dry vans, RVs, buses and new-energy vehicles, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Anhui Anche New Material Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Anhui Anche New Material Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for FRP corrugated sheets and gel-coated cooling-tower panels should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Anhui Anche New Material Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Anhui Anche New Material Co., Ltd. publishes FRP flat-sheet, roll and wall-panel production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Gel-coated surfaces with fiberglass mat or woven-roving constructions depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Custom thickness, width, length, color and surface finish is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Embossed and corrugated FRP panel production should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Anhui Anche New Material Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Anhui Anche New Material Co., Ltd.'s published wall-panel scope may be relevant to commercial interiors, food-processing spaces, hospitals, laboratories and other cleanable surfaces. Buyers should define the resin and gel coat, reinforcement construction, thickness and flatness tolerance, joint and trim system, cleaning chemicals, color and texture, fire or hygiene evidence, substrate preparation and installation responsibility for the complete wall or ceiling assembly.
Anhui Anche New Material Co., Ltd.'s listed transport sheets can be screened for refrigerated trucks, dry vans, RVs, buses or other vehicle bodies. The RFQ should state the skin and core construction, sheet or roll dimensions, surface class, color, UV exposure, adhesive and lamination route, thermal requirement, impact and peel evidence, fabrication details, annual volume and protective packing for cosmetic panels.
Anhui Anche New Material Co., Ltd.'s corrugated FRP range may support cooling-tower or industrial cladding discussions when the offered profile matches the existing support and fastening layout. Buyers should specify the corrugation geometry, resin and gel coat, thickness, span and load basis, UV and chemical exposure, cut lengths, drilling, edge finish, nesting and transport supports, then request evidence for the exact construction rather than a generic flat-sheet value.
Anhui Anche New Material Co., Ltd.'s source record currently includes Anhui Anche / East FRP Official Website, Anhui Anche Company Profile, FRP Wall Panels Directory, FRP Wall Panel and Sheet-Roll Technical Page. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-10. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Changzhou Rixin Molding Technology Co., Ltd. is based in Zhulin, Jintan District, Changzhou, Jiangsu. Its official website says the company was founded in 2009 and develops, manufactures and sells SMC/BMC compounds and compression-molded parts. It also designs SMC production lines and provides integrated SMC/BMC technical services. Published applications include automotive, building materials, sanitary products, rail, agriculture, marine equipment, electric power, water infrastructure and new energy. The China Composites Expo lists the company as CHANGZHOU RIXIN SMC/BMC CO., LTD., while the Rixin Group English site uses Changzhou Rixin Molding Technology Co., Ltd. This is a standalone legal-company profile, separate from GetFRP's Changzhou Rixin Group exhibitor profile. Capacity, equipment, qualification and customer-validation statements are company- or organizer-published and have not been independently verified by GetFRP.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company, main product groups, applications, factory and public contact details.
Open catalogCompany-published factory, production-line, staffing, product-range and laboratory overview.
Open catalogOfficial FRP wall-panel directory for building, hospital, laboratory, refrigerated and other wall applications.
Open catalogCompany-published panel construction, dimensions, typical properties, test methods, packing and lead-time information.
Open catalogOfficial flat-panel range for RV, refrigerated and dry-cargo truck, bus, marine and wall applications.
Open catalogOfficial corrugated-sheet range including cooling-tower and gel-coated FRP panels.
Open catalogOfficial embossed, decorative and pebble-textured FRP panel range.
Open catalogOfficial mobile, email, WhatsApp and Xuancheng address details.
Open catalog