Baoding Visight Advanced Material Technology is a source-reviewed supplier profile for resin infusion and vacuum infusion, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Founded in 2011, Baoding Visight Advanced Material Technology Co., Ltd. presents itself on its official site as a developer, manufacturer and seller of high-strength lightweight structural core materials. The current portfolio covers Vicell V-series PVC foam, T-series PET foam, P-series PMI foam and B-series balsa core, with stated applications in wind energy, aerospace, marine, rail, new-energy vehicles, medical equipment, sporting goods and radomes. The site identifies operating or production entities in Baoding, Weihai, Lianyungang and Wangdu, plus a Gansu contact. China Composites Expo lists the same entity under foam core, balsa, sandwich panels and composite parts. Capacity, market-position, performance and application statements are company- or organizer-published and have not been independently audited by GetFRP.
The reviewed product and process scope makes this supplier relevant to buyer searches for resin infusion and vacuum infusion. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Baoding Visight Advanced Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Baoding Visight Advanced Material Technology Vicell V-series closed-cell cross-linked PVC.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Baoding Visight Advanced Material Technology Co., Ltd. currently lists 5 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
The official Vicell V-series page identifies closed-cell cross-linked PVC foam from V45 through V250 and describes compatibility with epoxy, unsaturated-polyester and vinyl-ester matrices plus vacuum-infusion, RTM and molding applications. The Vicell T-series PET page lists T60 through T300 and selected sealed S variants for wind, transport, marine and building sandwich structures. The Vicell P-series PMI portfolio includes P, PH, Pb, Px and Pw subfamilies aimed at different co-cure temperatures and aerospace, rail, medical and radome uses. The Vicell B-series balsa page publishes B100, B130 and B150 density grades. These performance, temperature and resin-compatibility statements require grade-specific TDS review and validation in the buyer's actual process. An RFQ should specify core chemistry; nominal density and tolerance; sheet thickness and dimensions; closed-cell content; directional compression, shear and tensile criteria; water uptake; resin absorption; heat-distortion or continuous-use temperature; flame requirements; surface treatment; grooves, perforations or scrim format; minimum forming radius; splice pattern; moisture-protective packaging; and lot traceability. Wind, marine, rail and aerospace programs should additionally contract for sampling, aging, fatigue, flame/smoke/toxicity, dielectric or NDT methods and identify which legal entity and site will manufacture the quoted grade. Although the site displays management-system certificate imagery, the reviewed pages do not provide a complete current package sufficient to verify entity, address, scope, number and validity, so no certification is recorded as independently verified. The site currently works over HTTP while HTTPS returned a protocol error in the review environment. Independently verify the domain, contact and secure transfer method before exchanging controlled drawings, credentials or payment instructions.
No company-level certification is listed on this profile.
Evaluate Baoding Visight Advanced Material Technology Co., Ltd. as a potential composite product manufacturer for resin infusion, verify the public evidence and prepare a comparable RFQ.
Baoding Visight Advanced Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Vicell T-series PET structural foam, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Baoding Visight Advanced Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Baoding Visight Advanced Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Vicell B-series balsa-wood core material should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Baoding Visight Advanced Material Technology Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Baoding Visight Advanced Material Technology Co., Ltd. publishes PVC, PET and PMI foam development and production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Balsa-core processing depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Core-sheet cutting, grooving and perforation is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Core preparation for vacuum infusion, RTM and molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Baoding Visight Advanced Material Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Baoding Visight Advanced Material Technology Co., Ltd.: A radome RFQ should define frequency bands, transmission loss, reflection, dielectric properties, antenna clearance, section drawing, material, finish, wind and ice loads, UV and weather exposure, mounting, drainage and dimensional tolerance. Require representative radio-frequency, mechanical and environmental test evidence for the offered construction rather than a generic material statement.
Baoding Visight Advanced Material Technology Co., Ltd.'s listed machinery can enter a line comparison when the buyer supplies a written product and process requirement. The proposal should define the complete line boundary, controls, utilities, safety, throughput, acceptance test, installation, training, spares, documentation and the responsibility for proving product quality with representative material.
Baoding Visight Advanced Material Technology Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Baoding Visight Advanced Material Technology Co., Ltd.'s source record currently includes Official Visight Website, Visight Company Profile, Vicell V-series PVC Foam, Vicell T-series PET Foam. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, product, market and operating-location information.
Open catalogOfficial company history, R&D and production footprint and published scope.
Open catalogPublished grades, properties, resin compatibility and processing applications.
Open catalogOfficial PET-core grades and application scope.
Open catalogOfficial PMI subfamilies, temperature classes and application information.
Open catalogOfficial balsa-core density grades and processing information.
Open catalogOfficial Baoding headquarters and other published operating locations.
Open catalogOrganizer entry for Baoding Visight, product categories and exhibitor scope.
Open catalog
Hangzhou Holycore Composite Material Co., Ltd. is a Lin'an, Hangzhou supplier of lightweight sandwich panels, honeycomb cores and CKD truck-body solutions. Its current English website publishes the Hangzhou Holycore identity, a company-stated 2012 founding, Lin'an address, telephone and company email, and describes Holycore as part of Holley Group and Wazam New Materials. China Composites Expo lists the matching Chinese and English entity, emphasizing PP honeycomb panels and finished composite parts. The current catalog covers HolyPan, UDPan, CFRT PET and XPS panels, PP honeycomb cores, FRP honeycomb, PET and XPS sandwich panels, GWT glass-fabric reinforced PP sheet, flat, embossed and anti-slip FRP sheet, decorative panels and truck-body CKD kits. GetFRP assigns measured-demand phrases such as fiberglass sheets and fiberglass panels only where a listed product explicitly has an FRP or fiberglass skin or sheet; it does not relabel every honeycomb core as a fiberglass product.
Diab Technology (Changshu) Co., Ltd. is the Jiangsu, China entity currently identified in the footer and contact information throughout Diab's Chinese website. The official portfolio covers Divinycell PVC, PET, PES and PEI foam cores, ProBalsa balsa, finishing, pre-cut kits and composite consulting. China Composites Expo lists the matching entity as DIAB TECHNOLOGY (CHANGSHU) CO., LTD. under foam core, balsa and sandwich panels. Diab's long group history, worldwide sites and application references do not automatically establish the Changshu entity's incorporation date, capacity or individual delivery record. This profile therefore leaves the establishment year empty and does not transfer every group approval to the Changshu company. Product and performance information still requires grade-, thickness-, finish- and manufacturing-site-specific verification.