BASF (China) — Performance Materials is presented as a source-reviewed supplier profile centered on Epoxy, with company-published capability separated from buyer-side verification requirements.
BASF's China performance materials business — wind, automotive, engineering structures.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for formulators, processors and procurement teams comparing chemistry, processing window, cured performance and regulatory documentation. It organizes BASF (China) — Performance Materials's published products, processes, certificate references and official sources around the primary topic “BASF (China) — Performance Materials Epoxy.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
BASF (China) — Performance Materials currently lists 4 product or service groups and 0 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
BASF's China performance materials business — wind, automotive, engineering structures.
No company-level certification is listed on this profile.
Evaluate BASF (China) — Performance Materials as a potential composite resin supplier for Epoxy, verify the public evidence and prepare a comparable RFQ.
BASF (China) — Performance Materials includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Polyurethane, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by BASF (China) — Performance Materials should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask BASF (China) — Performance Materials for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Wind casting resin should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare BASF (China) — Performance Materials's response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
BASF (China) — Performance Materials's chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
BASF (China) — Performance Materials's product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
BASF (China) — Performance Materials: The resin portfolio may be relevant to continuous or closed-mold composite processing. Qualification should cover viscosity, mix ratio where applicable, gel or reaction profile, cure conditions, exotherm, reinforcement wet-out and the cured properties required by the actual line and section thickness.
Resin comparisons should be made at the processing condition that the factory can control. A low initial viscosity is not useful if pot life, exotherm or cure creates voids and distortion in the intended thickness. Record material temperature, ambient conditions, mix accuracy, gel behavior and post-cure so the material trial can be reproduced during production and investigated if performance changes.
Cured-property tables require context. Neat-resin values, cast plaques and reinforced laminates answer different questions, while conditioning and cure can materially change results. Buyers should identify the relevant construction and test method, distinguish typical from guaranteed values, and agree which certificate fields or periodic tests will demonstrate ongoing conformity after approval.
Shelf life and logistics are part of resin quality. Confirm manufacturing date, storage temperature, inhibitor or settling behavior, drum or IBC closure, dangerous-goods classification and the procedure for material exposed outside its permitted range. The purchase order should also define change notification for formulation, raw-material source and manufacturing site.
BASF (China) — Performance Materials does not yet have a complete official source set attached to this profile. The page can support discovery, but buyers should not rely on it for approval until the legal identity, official website and product evidence are documented.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of not recorded. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
No eCatalog has been published yet.
Techstorm Advanced Material Corporation Limited is a Shanghai-headquartered developer and manufacturer of high-performance thermoset materials and identifies itself on its official site by Shanghai Stock Exchange code 601026.SH. Its published portfolio spans wind energy, general composites, new-energy vehicles and industrial adhesives, electrical insulation, and photovoltaics. For general composites, Techstorm lists resin systems for filament-wound cylinders, cable core rods and glass- or carbon-fiber wind-blade spar-cap pultrusion, flame-retardant aircraft seating, carbon-fiber prepreg, and HP-RTM or prepreg battery covers.
ALTA Performance Materials is a global manufacturer and supplier of high-performance thermoset resins and gelcoats for composite materials. Its official modern-slavery statement says ALTA Performance Materials Holdings Company (UK) Limited and its affiliates operate 20 sites across the Americas, Europe, the Middle East and Asia. The official contact page lists a global headquarters in London and regional centers in Grandview, Barcelona, Navi Mumbai, Shanghai and Araçariguama. ALTA publishes applications across building materials, corrosion-resistant FRP, recreation, transportation and wind energy. These footprint and business statements are company-published and have not been independently verified by GetFRP.
Wanhua Chemical is a global advanced-materials and chemical producer headquartered in Yantai, Shandong. Its official site organizes the business across polyurethanes, petrochemicals, performance chemicals and emerging materials, with 14 principal production complexes in China and Europe. For composites, Wanhua publishes foaming and non-foaming polyurethane resin systems, glass-fiber-reinforced PU pultrusion and HP-RTM solutions, plus specialty amines and epoxy-curing-agent raw materials for FRP, high-pressure pipe, prepreg and laminate applications. The present company was established in 1998, with operating roots in a synthetic-leather and MDI project begun in 1978.