Cardolite Chemical (Zhuhai) is presented as a source-reviewed supplier profile centered on LITE 2401 low-viscosity phenalkamine epoxy curing, with company-published capability separated from buyer-side verification requirements.
Cardolite Chemical (Zhuhai) Co., Ltd. is Cardolite's Zhuhai manufacturing entity for cashew nutshell liquid derivative chemistry. The China Composites Expo listing and Cardolite's current official composites pages support phenalkamine epoxy curing agents, a cardanol phenolic crosslinker, reactive diluent, flexible epoxy modifier, low-viscosity epoxy novolac, polyols and FormuLITE systems. Some grades are described for hand lay-up, pultrusion or adhesive applications. Those are resin-use contexts and do not mean that the Zhuhai company manufactures pultruded profiles, fiber reinforcement or finished composite parts; no such material-product keywords are injected. This page presents the group's current inquiry families, while buyers must confirm the grades actually produced, sold or technically supported by the Zhuhai legal entity and the stated country of origin. Group history, capacity, approvals and other sites' certifications are not transferred to this entity.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Cardolite Chemical (Zhuhai) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Cardolite Chemical (Zhuhai) LITE 2401 low-viscosity phenalkamine epoxy curing.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Cardolite Chemical (Zhuhai) Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Cardolite's official composites portfolio covers phenalkamine curing agents, a cardanol phenolic crosslinker, reactive dilution, flexible epoxy modification, low-viscosity epoxy novolac, polyols and formulated systems. LITE 2401 and LITE 2402 are presented as solvent-free, very-low-viscosity phenalkamine curing agents for fiber-reinforced epoxy composites. NX-4005 is a solvent-free, low-viscosity cardanol phenolic crosslinker described for hand lay-up, pultrusion and adhesive use; LITE 513DF and LITE 514HP address reactive dilution and flexibility, while LITE 547LV is an epoxy novolac and the NX/LITE 9000 families are polyols. These descriptions are starting points, not interchangeable guarantees. An RFQ should state the base resin, curing-agent ratio, mixed viscosity, pot life, gel and demold target, cure schedule, laminate thickness, peak exotherm, glass-transition requirement, mechanical and chemical-resistance targets, color, moisture sensitivity and storage life. Evaluation should use the buyer's actual glass, carbon or other reinforcement and the intended process to verify wet-out, drain, air release, exotherm, void content, surface finish and post-cure. Buyers should request the current regional TDS, SDS, sample certificate of analysis, regulatory declarations, transport classification and controlled formulation-change notice. Cardolite's official locations page says products are made at Zhuhai and Mangalore facilities, but the quote must identify which grades are produced or supplied by Cardolite Chemical (Zhuhai), the manufacturing origin, seller of record and technical-support entity. The broader group's history, capacity, patents, certifications and approvals are not automatically attributes of the Zhuhai legal entity. No pultruded-profile, fiberglass, carbon-fiber or finished-part search term is assigned merely because a resin is recommended for that conversion process.
No company-level certification is listed on this profile.
Evaluate Cardolite Chemical (Zhuhai) Co., Ltd. as a potential composite product manufacturer for LITE 2401 low-viscosity phenalkamine epoxy curing agent, verify the public evidence and prepare a comparable RFQ.
Cardolite Chemical (Zhuhai) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For LITE 2402 low-viscosity phenalkamine epoxy curing agent, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Cardolite Chemical (Zhuhai) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Cardolite Chemical (Zhuhai) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for LITE 513DF reactive diluent and modifier should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Cardolite Chemical (Zhuhai) Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Cardolite Chemical (Zhuhai) Co., Ltd. publishes Cashew nutshell liquid derivative chemistry as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Phenalkamine curing-agent formulation depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Epoxy novolac resin formulation is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Reactive dilution and flexible modification should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Cardolite Chemical (Zhuhai) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Cardolite Chemical (Zhuhai) Co., Ltd.'s published scope creates a potential fit for window, door or building-envelope programs. Buyers should confirm the exact profile series, section drawing, glazing and hardware configuration, whole-assembly thermal basis, air and water performance, finish, fire claim and the certificate or report that represents the offered system.
Cardolite Chemical (Zhuhai) Co., Ltd.'s published wall-panel scope may be relevant to commercial interiors, food-processing spaces, hospitals, laboratories and other cleanable surfaces. Buyers should define the resin and gel coat, reinforcement construction, thickness and flatness tolerance, joint and trim system, cleaning chemicals, color and texture, fire or hygiene evidence, substrate preparation and installation responsibility for the complete wall or ceiling assembly.
Cardolite Chemical (Zhuhai) Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Cardolite Chemical (Zhuhai) Co., Ltd.'s source record currently includes Cardolite China Official Website, About Cardolite, Cardolite Composites, Cardolite Locations. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official China business and product entry.
Open catalogPublished group and China scope.
Open catalogComposite resin, curing-agent and modifier families.
Open catalogOfficial Zhuhai site address and telephone.
Open catalogOrganizer source for the Zhuhai entity and composite scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.