Changchun BoChao Auto Parts is presented as a source-reviewed supplier profile centered on Natural-fiber composites for automotive door panels, with company-published capability separated from buyer-side verification requirements.
Changchun BoChao Auto Parts Co., Ltd. presents itself on its official website as a developer and manufacturer of natural plant-fiber composite materials, with an operating history beginning in 2006 and sites stated in Changchun, Yangzhou and Foshan. Its current product page covers hemp, bamboo and other natural-fiber materials for automotive door panels, headliners, luggage-compartment trim, seat backs, parcel shelves and carpet substrates, together with green interior boards and exploratory ski and sporting-goods applications. The site also shows material preparation, composite molding, mold development, waterjet trimming and quality-inspection activities. China Composites Expo lists the same entity under natural fibers and composite end products. Performance, customer, capacity, patent and environmental-benefit statements remain supplier- or organizer-published and have not been independently audited by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Changchun BoChao Auto Parts Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Changchun BoChao Auto Parts Natural-fiber composites for automotive door panels.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Changchun BoChao Auto Parts Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
BoChao's current website positions its natural plant-fiber composites around low weight, acoustic and thermal insulation, moldability, recyclability and lower-carbon material choices. It also states that material, structural and product development can be tailored to customer performance targets, process conditions and application scenarios. The home page displays certificate names and images including IATF 16949:2016 and ISO 14001:2015, but the reviewed public pages do not provide a complete current package sufficient to verify the certified entity, manufacturing address, scope, certificate number and validity. No certification is therefore recorded as independently verified. An RFQ should convert the broad phrase “natural-fiber composite” into controlled acceptance criteria: hemp, bamboo or other fiber type, source and lot; thermoplastic or thermoset matrix and recycled-content target; fiber content, areal weight, sheet thickness and tolerances; moisture, odor, VOC, mold growth and water uptake; tensile, flexural, peel, impact, creep, flame, smoke and heat-aging requirements; skin, film and backing construction; color, texture, visible defects, warpage and trimmed-edge quality. Automotive programs should additionally define vehicle and drawing revision, tool ownership, first-article approval, PPAP or APQP level, process capability, material-change notification, traceability and failure analysis. Interior-building or sporting-goods projects cannot simply reuse an automotive test package; destination-market formaldehyde or VOC, fire, weathering, fatigue, humidity and consumer-product rules need separate qualification. The current website gives No. 888 Baolai Street in the Changchun Automotive Economic and Technological Development Zone, while an older page on the same domain published No. 399 Golf Road. Confirm the contracting entity, active plant and beneficiary account before an audit, order or payment.
No company-level certification is listed on this profile.
Evaluate Changchun BoChao Auto Parts Co., Ltd. as a potential composite product manufacturer for Natural-fiber composites for automotive door panels, headliners, parcel shelves and seat-back parts, verify the public evidence and prepare a comparable RFQ.
Changchun BoChao Auto Parts Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Natural-fiber luggage-compartment trim and carpet substrates, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Changchun BoChao Auto Parts Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Changchun BoChao Auto Parts Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Bamboo-fiber composites and green interior boards should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Changchun BoChao Auto Parts Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Changchun BoChao Auto Parts Co., Ltd. publishes Natural plant-fiber material formulation and application development as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Fiber-composite sheet production depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Hot pressing and compression molding is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Mold design and manufacturing should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Changchun BoChao Auto Parts Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Changchun BoChao Auto Parts Co., Ltd.'s published scope creates a potential fit for window, door or building-envelope programs. Buyers should confirm the exact profile series, section drawing, glazing and hardware configuration, whole-assembly thermal basis, air and water performance, finish, fire claim and the certificate or report that represents the offered system.
Changchun BoChao Auto Parts Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Changchun BoChao Auto Parts Co., Ltd.'s listed machinery can enter a line comparison when the buyer supplies a written product and process requirement. The proposal should define the complete line boundary, controls, utilities, safety, throughput, acceptance test, installation, training, spares, documentation and the responsibility for proving product quality with representative material.
Changchun BoChao Auto Parts Co., Ltd.'s source record currently includes Official BoChao Website, BoChao Product Portfolio, BoChao R&D Capabilities, China Composites Expo Exhibitors — C. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company positioning, production scenes, capabilities and current contact details.
Open catalogNatural-fiber automotive interiors, sheets, interior boards and sporting applications.
Open catalogSupplier-published material, process, tooling and test capabilities.
Open catalogOrganizer entry for BoChao, its categories and exhibitor description.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.