Changzhou Huake Polymers is a source-reviewed supplier profile for resin infusion and vacuum infusion, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Changzhou Huake Polymers Co., Ltd. states on its official website that it was founded in 2001 and develops, manufactures and sells unsaturated-polyester, vinyl-ester and related polymer products for composites, adhesives and adjacent markets. Its current categories include unsaturated polyester, vinyl ester, waterborne resin, colored gelcoat and pigment paste, specialty resin, polyurethane and additives. The official application pages further publish grades for hand lay-up, spray-up, winding, compression molding, pultrusion, continuous sheet, vacuum infusion and other processes. China Composites Expo lists the same entity under unsaturated polyester, vinyl ester, other resins, gelcoat and pigment paste. Capacity, grade-count, certification, performance and application statements remain supplier- or organizer-published and have not been independently audited by GetFRP.
The reviewed product and process scope makes this supplier relevant to buyer searches for resin infusion and vacuum infusion. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for formulators, processors and procurement teams comparing chemistry, processing window, cured performance and regulatory documentation. It organizes Changzhou Huake Polymers Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Changzhou Huake Polymers Unsaturated-polyester resins for hand lay-up.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Changzhou Huake Polymers Co., Ltd. currently lists 7 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Huake organizes part of its selection guidance by process rather than only by resin family. Its building and infrastructure page lists HS-902, HS-1125 and HS-1520 molding resins plus low-shrink additives; HS-1008A, HS-2252, HS-4483B and HS-5733 orthophthalic, isophthalic, vinyl-ester and polyurethane pultrusion systems; and multiple hand-lay-up and continuous-sheet grades. The unsaturated-polyester directory also explicitly covers winding, molding, pultrusion and vacuum-infusion processes. A buyer should not order merely “191 resin” or “vinyl ester.” The RFQ needs the exact grade and chemistry; monomer and restricted-substance limits; viscosity; thixotropic index; acid value; solids; gel, peak-exotherm and cure time; shrinkage; neat-resin mechanical properties; HDT or Tg; water and chemical resistance; color; storage and shelf life; initiator, promoter and filler package; and batch CoA. Vacuum infusion, RTM, winding, pultrusion, SMC or BMC and CIPP impose materially different rheology, reaction windows, equipment and field conditions, so the grade must be trialed with the actual reinforcement, core, tool and cure schedule. Food contact, marine class, rail fire, electrical, potable-water, CIPP and building programs require destination-market and grade-specific current approvals. The site displays or mentions management-system, marine and product-compliance information, but the reviewed public material did not expose a complete current package sufficient to verify the legal entity, Yulong North Road site, scope, certificate number and validity; the certification arrays remain empty. The website also displays a hazardous-chemicals notice. Before ordering resin or associated chemicals, review the SDS, UN transport classification, temperature control, package, dangerous-goods carrier, import permit and waste-disposal responsibilities.
No company-level certification is listed on this profile.
Evaluate Changzhou Huake Polymers Co., Ltd. as a potential composite resin supplier for resin infusion, verify the public evidence and prepare a comparable RFQ.
Changzhou Huake Polymers Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Filament-winding resin grades for tanks and pipes, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Changzhou Huake Polymers Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Changzhou Huake Polymers Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Changzhou Huake Polymers Co., Ltd. publishes Unsaturated-polyester and vinyl-ester resin synthesis as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Resin formulation for hand lay-up, spray-up and casting depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Wet-winding and pultrusion resin application development is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating SMC and BMC molding-resin and low-shrink system development should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Changzhou Huake Polymers Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Changzhou Huake Polymers Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Changzhou Huake Polymers Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Changzhou Huake Polymers Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Changzhou Huake Polymers Co., Ltd.'s source record currently includes Official Huake Polymers Website, Huake Polymers Company Profile, Huake Product Categories, Huake Unsaturated-polyester Resins. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, products, applications, news and current contact information.
Open catalogOfficial scope, application markets and company positioning.
Open catalogUnsaturated polyester, vinyl ester, waterborne, specialty, polyurethane and additives.
Open catalogOfficial hand lay-up, spray-up, winding, molding, pultrusion and vacuum-infusion process entry.
Open catalogPublished molding, hand-lay-up, pultrusion and continuous-sheet grades.
Open catalogEnglish company, application and international inquiry information.
Open catalogOfficial Changzhou address, sales telephone and business email.
Open catalogOrganizer entry for Huake, its categories and exhibitor description.
Open catalog
Techstorm Advanced Material Corporation Limited is a Shanghai-headquartered developer and manufacturer of high-performance thermoset materials and identifies itself on its official site by Shanghai Stock Exchange code 601026.SH. Its published portfolio spans wind energy, general composites, new-energy vehicles and industrial adhesives, electrical insulation, and photovoltaics. For general composites, Techstorm lists resin systems for filament-wound cylinders, cable core rods and glass- or carbon-fiber wind-blade spar-cap pultrusion, flame-retardant aircraft seating, carbon-fiber prepreg, and HP-RTM or prepreg battery covers.
ALTA Performance Materials is a global manufacturer and supplier of high-performance thermoset resins and gelcoats for composite materials. Its official modern-slavery statement says ALTA Performance Materials Holdings Company (UK) Limited and its affiliates operate 20 sites across the Americas, Europe, the Middle East and Asia. The official contact page lists a global headquarters in London and regional centers in Grandview, Barcelona, Navi Mumbai, Shanghai and Araçariguama. ALTA publishes applications across building materials, corrosion-resistant FRP, recreation, transportation and wind energy. These footprint and business statements are company-published and have not been independently verified by GetFRP.
Wanhua Chemical is a global advanced-materials and chemical producer headquartered in Yantai, Shandong. Its official site organizes the business across polyurethanes, petrochemicals, performance chemicals and emerging materials, with 14 principal production complexes in China and Europe. For composites, Wanhua publishes foaming and non-foaming polyurethane resin systems, glass-fiber-reinforced PU pultrusion and HP-RTM solutions, plus specialty amines and epoxy-curing-agent raw materials for FRP, high-pressure pipe, prepreg and laminate applications. The present company was established in 1998, with operating roots in a synthetic-leather and MDI project begun in 1978.