Chang Zhou Matex Composites is presented as a source-reviewed supplier profile centered on Multiaxial Fiberglass Fabrics, with company-published capability separated from buyer-side verification requirements.
Chang Zhou Matex Composites Co., Ltd. is a fiberglass-material manufacturer in Changzhou, Jiangsu. Its official site says the company has developed and produced fiberglass textiles, mats and veils since 2007. The published reinforcement portfolio covers knitted fabrics and mats, chopped strand mats, woven reinforcements and veils, with additional roving, chopped-strand, unsaturated-polyester-resin and vinyl-ester-resin ranges. Matex reports approximately 70 employees, a 19,000 m² facility, about 21,000 tonnes of annual fiberglass capacity and exports to more than 30 countries and regions; these scale and export figures are company-published.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for materials engineers and converters evaluating reinforcement form, sizing compatibility, package quality and downstream process stability. It organizes Chang Zhou Matex Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Chang Zhou Matex Composites Multiaxial Fiberglass Fabrics.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Chang Zhou Matex Composites Co., Ltd. currently lists 6 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Matex's official range includes unidirectional, biaxial, triaxial and quadraxial fabrics; stitched, RTM and infusion mats; powder- and emulsion-bonded chopped strand mats; woven roving, fiberglass cloth and woven-roving combinations; and fiberglass or polyester veils. Product pages publish parameters such as areal weight, roll width, fiber orientation, compatible resin systems and typical applications, and the company offers custom constructions. Its roving, chopped-strand and resin ranges target pultrusion, filament winding, spray-up, continuous panels, thermoplastics, BMC, hand lay-up, RTM and infusion. Buyers should validate the exact TDS/SDS, glass type and sizing, areal-weight tolerance, width and roll length, resin compatibility, mechanical and wet-out performance, current quality-system certificates, MOQ, lead time and packaging for the selected grade.
No company-level certification is listed on this profile.
Evaluate Chang Zhou Matex Composites Co., Ltd. as a potential composite reinforcement supplier for Unidirectional, biaxial, triaxial and quadraxial fiberglass fabrics, verify the public evidence and prepare a comparable RFQ.
Chang Zhou Matex Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Powder- and emulsion-bonded chopped strand mats, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Chang Zhou Matex Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Chang Zhou Matex Composites Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Fiberglass and polyester veils or tissues should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Chang Zhou Matex Composites Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Chang Zhou Matex Composites Co., Ltd. publishes Multiaxial knitting and stitch bonding as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Fiberglass weaving depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Chopped-strand and combination-mat production is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Custom fiberglass reinforcement development should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Chang Zhou Matex Composites Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Chang Zhou Matex Composites Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Chang Zhou Matex Composites Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Chang Zhou Matex Composites Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Chang Zhou Matex Composites Co., Ltd.'s source record currently includes Matex Company Profile, Matex Product Directory, Warp Unidirectional Fiberglass Technical Page, 1203 Pultrusion Resin Technical Data Sheet. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-06. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Changzhou Tianma Group Co., Ltd. is based in Xinbei District, Changzhou, Jiangsu. Both the official website and China Composites Expo identify this legal entity, while the website also notes its former identity as Building Materials Factory 253. The site traces the enterprise lineage to a state-planned project begun in 1960 and calls the business the cradle of China's FRP industry; 1960 is therefore presented here as the start of the organizational lineage, not the current legal entity's registration date. The published portfolio spans glass-fiber yarns and products, unsaturated polyester and vinyl ester resins, gelcoats and auxiliaries, SMC/BMC, finished FRP products, and wind-energy and photovoltaic composites. China Composites Expo lists the exhibitor as CHANGZHOU TIANMA GROUP CO., LTD. and publishes booth 7M06 for 2026. History, industry-position, scale, capacity, market and product-performance statements are company- or organizer-published and have not been independently verified by GetFRP.
China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.
Zhongfu Shenying Carbon Fiber Co., Ltd. was established in 2006 and is part of China National Building Material Group. The company develops, manufactures and sells carbon fiber and carbon-fiber composite materials, and was listed on the Shanghai Stock Exchange in 2022 under stock code 688295.
Official product catalogs, web directories and technical guides published by the supplier.
Official company history, fiberglass portfolio, published plant scale and export footprint.
Open catalogOfficial directory for multiaxial fabrics, mats, woven reinforcements, roving, chopped strands and resins.
Open catalogOfficial construction, areal-weight, width, application and quality-control information for warp unidirectional reinforcements.
Open catalogOfficial technical data for an unsaturated polyester resin intended for pultruded FRP profiles.
Open catalogOfficial Changzhou address, public email and telephone details.
Open catalog