Changzhou Shenying Carbon Fiber Composites is presented as a source-reviewed supplier profile centered on Carbon Fiber Automotive Parts, with company-published capability separated from buyer-side verification requirements.
Changzhou Shenying Carbon Fiber Composites Co., Ltd. is a Changzhou legal entity within the Lianyungang Yingyou industrial group, based in Wujin Economic Development Zone, Jiangsu. Its official profile divides the business into mold engineering, injection molding, blow molding, carbon-fiber-reinforced plastics and carbon-fiber application R&D, and publishes winding, pultrusion, compression molding, autoclave and RTM capabilities. The 2026 China Composites Expo directory classifies its offering under carbon fiber and fabric, epoxy resin, prepreg, and finished composite products or parts. A 2025 Wujin District government profile says the company has developed and produced carbon-fiber composites and products in the West Taihu area since 2011. It is not the same legal entity as GetFRP-listed Zhongfu Shenying Carbon Fiber Co., Ltd. in the CNBM group, and the two records are not merged.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Changzhou Shenying Carbon Fiber Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Changzhou Shenying Carbon Fiber Composites Carbon Fiber Automotive Parts.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Changzhou Shenying Carbon Fiber Composites Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
The official company profile lists carbon-fiber automotive parts, radiolucent medical panels, drive shafts and UAV components, and states that the site has chopped-fiber pelletizing, three-dimensional winding, pultrusion, compression molding, autoclave and RTM equipment. Its product directory additionally shows examples published in 2014, including extra-long structures, robotic-arm rods, gears, fairings, fins, instrument cases and long-glass-fiber pellets. The site also claims 80–2,800-tonne injection machines, automated blow molding, mold and plastic-welding equipment, and exports to Japan, the United States, the Philippines and the Middle East. Buyers should revalidate these older equipment, product and export statements through a current machine list, order or customs evidence and an on-site audit. Both the official profile and CCE have published RMB 250 million registered capital, RMB 330 million total investment and 68,000 m² of buildings, while a 2024 public-company filing records RMB 113.62 million registered capital for the legal entity. These figures materially conflict, so buyers should rely on the latest business license, ownership evidence and audited or company-stamped documents. A composite-part RFQ should define the material system and fiber grade; layup or fiber fraction; molding route; mold and fixture responsibility; dimensional and cosmetic tolerances; void and defect limits; mechanical and functional testing; NDT; first article or sample; lot traceability; and CoC or CoA. Automotive work should add APQP, PPAP, control plan and change management. Radiolucent medical panels require X-ray attenuation, imaging-artifact, biocompatibility or cleaning and applicable-regulatory requirements, while drive shafts and rotating parts require torque, critical speed, dynamic balance, fatigue and overspeed validation. The RFQ should also confirm the current production site, subcontracted operations, capacity, MOQ, lead time, packaging, export documents, intellectual property, warranty and nonconformance handling.
Evaluate Changzhou Shenying Carbon Fiber Composites Co., Ltd. as a potential composite product manufacturer for Carbon-fiber automotive components and structures, verify the public evidence and prepare a comparable RFQ.
Changzhou Shenying Carbon Fiber Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Radiolucent carbon-fiber medical panels, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Changzhou Shenying Carbon Fiber Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Changzhou Shenying Carbon Fiber Composites Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Changzhou Shenying Carbon Fiber Composites Co., Ltd. publishes Chopped-carbon-fiber pellet compounding as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Three-dimensional fiber winding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Carbon-fiber composite pultrusion is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Composite compression molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Changzhou Shenying Carbon Fiber Composites Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Changzhou Shenying Carbon Fiber Composites Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Changzhou Shenying Carbon Fiber Composites Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Changzhou Shenying Carbon Fiber Composites Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Changzhou Shenying Carbon Fiber Composites Co., Ltd.'s source record currently includes Official Changzhou Shenying Company Profile, Carbon-Fiber & Plastic Product Directory, Official Contact Page, China Composites Expo Exhibitor Profile. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 1 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Chongqing Dujiang Composites Co., Ltd. states that the current company name was adopted in 2002 and traces its fiberglass and FRP operating history to 1980. Its published catalog spans fiberglass reinforcements, thermoset resins, FRP profiles, carbon- and aramid-fiber materials, and related auxiliaries. The company reports 289 employees, approximately 50,000 m² of plant space, one-stop sourcing and OEM/ODM services. Its official sites publish a Yubei office address and a separate Beibei production address; buyers should verify the contracting entity, actual production site, product origin and quality-responsibility chain through the business license, factory audit and order-specific documents.
Official product catalogs, web directories and technical guides published by the supplier.
Official group relationship, business modules, published scale, equipment, processes, products and export-market statements.
Open catalogOfficial structures, medical panels, drive shafts, UAVs, gears, pellets and other example products.
Open catalogLegal name, Wujin address, telephone and active hosted website; the listed standalone domain is no longer responsive.
Open catalogOrganizer-published group relationship, scale figures, applications, booth and product categories.
Open catalogGovernment record of founding year, current R&D direction, project and high-tech, specialized-enterprise and R&D-platform statements.
Open catalogPublic filing covering the legal entity, unified credit code, registered capital, address, ownership and business scope.
Open catalog