Changzhou Utek Composite is presented as a source-reviewed supplier profile centered on Fiberglass Roving and Chopped Strands, with company-published capability separated from buyer-side verification requirements.
Changzhou Utek Composite Co., Ltd. is based in Changzhou, Jiangsu. Its official website says the company was established in 2012, initially focusing on fiberglass, resins, SMC and BMC, and now positions the business as an overall composite-material solution provider. Its published catalog spans reinforcements, resins and chemicals, process consumables, core materials and axial fans. The company's China Composites Expo exhibitor listing says it produces powder- and emulsion-bonded chopped-strand mat, stitched mat, combination mat, warp-knitted fabric, core mat and fiberglass cloth, while also supplying alkali-resistant glass fiber, SMC/BMC, gratings and composite geosynthetics. These establishment, production and product-scope statements are company- or expo-published and have not been independently verified by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for materials engineers and converters evaluating reinforcement form, sizing compatibility, package quality and downstream process stability. It organizes Changzhou Utek Composite Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Changzhou Utek Composite Fiberglass Roving and Chopped Strands.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Changzhou Utek Composite Co., Ltd. currently lists 8 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Utek's official catalog is organized around reinforcements, chemicals, process auxiliaries, composite materials and axial fans. Reinforcements include E-, C- and AR-glass yarns and rovings, chopped-strand and continuous-filament mats, surface tissues, stitched multiaxial and unidirectional fabrics, plus S-glass, high-silica or quartz, basalt, carbon, aramid and UHMWPE fabrics. The chemical directory lists SMC/BMC, gelcoats, unsaturated-polyester, vinyl-ester and epoxy resins, binders, sizings, accelerators and curing systems. Its auxiliary directory covers vacuum bagging film, release film, breather, flow mesh, peel ply, sealant tape, PVC/PET/PMI foams, PP honeycomb, and materials for winding, pultrusion and hand lay-up. Buyers should first confirm whether each grade is manufactured by Utek or traded, then validate the legal manufacturer and site, fiber and sizing type, linear or areal weight, fabric construction, resin system and properties, core density and mechanics, consumable temperature resistance and resin compatibility, test methods, lot CoA, current TDS/SDS, management-system certificates, MOQ, packaging and lead time.
No company-level certification is listed on this profile.
Evaluate Changzhou Utek Composite Co., Ltd. as a potential composite reinforcement supplier for Fiberglass yarns, chopped strands and rovings, verify the public evidence and prepare a comparable RFQ.
Changzhou Utek Composite Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Chopped-strand, continuous-filament, surface and combination mats, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Changzhou Utek Composite Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Changzhou Utek Composite Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Carbon, aramid, basalt and high-silica fabrics should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Changzhou Utek Composite Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Changzhou Utek Composite Co., Ltd. publishes Fiberglass mat and fabric supply as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Material packages for hand lay-up, filament winding and pultrusion depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Vacuum-infusion and autoclave consumable supply is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating SMC and BMC material supply should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Changzhou Utek Composite Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Changzhou Utek Composite Co., Ltd.'s listed grating or platform products may be relevant to industrial access systems. Qualification should identify molded or pultruded construction, resin, panel and mesh geometry, surface, support span, load and deflection limit, cut plan, clips, fire or smoke requirement and the test basis behind any published load table.
Changzhou Utek Composite Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Changzhou Utek Composite Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Changzhou Utek Composite Co., Ltd.'s source record currently includes Utek Official Website & Company Introduction, Reinforcement Product Directory, Resin & Chemical Materials Directory, Process Consumables & Core Materials Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Changzhou Tianma Group Co., Ltd. is based in Xinbei District, Changzhou, Jiangsu. Both the official website and China Composites Expo identify this legal entity, while the website also notes its former identity as Building Materials Factory 253. The site traces the enterprise lineage to a state-planned project begun in 1960 and calls the business the cradle of China's FRP industry; 1960 is therefore presented here as the start of the organizational lineage, not the current legal entity's registration date. The published portfolio spans glass-fiber yarns and products, unsaturated polyester and vinyl ester resins, gelcoats and auxiliaries, SMC/BMC, finished FRP products, and wind-energy and photovoltaic composites. China Composites Expo lists the exhibitor as CHANGZHOU TIANMA GROUP CO., LTD. and publishes booth 7M06 for 2026. History, industry-position, scale, capacity, market and product-performance statements are company- or organizer-published and have not been independently verified by GetFRP.
China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.
Zhongfu Shenying Carbon Fiber Co., Ltd. was established in 2006 and is part of China National Building Material Group. The company develops, manufactures and sells carbon fiber and carbon-fiber composite materials, and was listed on the Shanghai Stock Exchange in 2022 under stock code 688295.
Official product catalogs, web directories and technical guides published by the supplier.
Official company story, positioning and product scope published by Utek.
Open catalogOfficial directory for yarns, rovings, mats, fabrics and high-performance reinforcements.
Open catalogOfficial directory for SMC/BMC, resins, gelcoats, binders, sizings and curing systems.
Open catalogOfficial directory for infusion, autoclave, winding, pultrusion and hand-lay-up consumables and core materials.
Open catalogOrganizer-published exhibitor identity, production and supply scope, and product categories.
Open catalogOfficial Changzhou registered office, telephone, fax, email and inquiry channel.
Open catalog