Chengwu Herun New Material Technology is presented as a source-reviewed supplier profile centered on DMP-30, with company-published capability separated from buyer-side verification requirements.
Chengwu Herun New Material Technology Co., Ltd. is located in Chengwu County Chemical Industry Park, Heze, Shandong. Public project documentation records its incorporation on April 13, 2021. Its current official site operates under MIIT filing Lu ICP 2022030854 and lists DMP-30, DMP-10, BDMA and other epoxy accelerators; phenalkamine, modified-amine, polyamide and waterborne-amine hardeners; functional epoxy systems; and custom toll manufacturing. China Composites Expo lists the same mainland-China entity and publishes booth 8S01 for 2026 under epoxy resin, adhesive, coating, other reinforcement and finished-composite categories. Website, project and capacity information is company-, project- or organizer-published and has not been independently site-audited by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for formulators, processors and procurement teams comparing chemistry, processing window, cured performance and regulatory documentation. It organizes Chengwu Herun New Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Chengwu Herun New Material Technology DMP-30.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Chengwu Herun New Material Technology Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
The official accelerator directory lists DMP-30, DMP-10, BDMA, HR-7088 and HR-7095. The hardener directory groups phenalkamine, waterborne-amine, modified-amine and polyamide products and displays grades including HR-D062, HR-8001, HR-2301/2302, HR-8019, HR-8188 and HR-PAA46/PAA50. CCE publishes Phase-I design capacities of 20,000 t/y accelerators, 24,000 t/y hardeners and 6,000 t/y waterborne hardeners, while public project documentation describes a different initial built scale; buyers must verify the current plant, line and latest environmental approval/acceptance for the exact product. An RFQ should define product family and grade, chemical identity and CAS, active content, amine value or active-hydrogen equivalent, viscosity, color, density, moisture, free amine/phenol, solids, solvent, ionic content and water dilutability. State the companion epoxy, resin-to-hardener ratio, pot life, gel/tack-free/full-cure time and temperature, exotherm, Tg, hardness, tensile/flexural/impact/bond performance, water/salt-spray/chemical resistance and storage stability. Composite use also needs reinforcement, lay-up or fiber volume fraction, infusion or compression process, mixed-viscosity and exotherm profile, wet-out, degassing, thick-section thermal control, void content, glass-transition temperature, post-cure and final mechanical/durability tests. Require current TDS, SDS, batch CoA, methods, retain-sample and change-notification controls, and qualify samples and production lots with the same resin, filler, pigment, accelerator and process. The site exposes no complete current management-system or product certificates sufficient to verify legal entity, address, scope, number, issuer and validity; none is recorded as verified. The official site currently serves content only over HTTP, while HTTPS has certificate/handshake failures. Independently verify the domain, contact, beneficiary and bank account before payment or file exchange. Its published email is malformed as cwhrxcl@.163.com and is deliberately omitted; confirm a working business email by official phone. For each chemical, also verify the SDS, hazard and transport classification, label, regulatory inventories, HS code, packing, storage, shelf life and destination-market obligations.
No company-level certification is listed on this profile.
Evaluate Chengwu Herun New Material Technology Co., Ltd. as a potential composite resin supplier for DMP-30, DMP-10, BDMA and HR-series epoxy accelerators, verify the public evidence and prepare a comparable RFQ.
Chengwu Herun New Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Phenalkamine epoxy curing agents, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Chengwu Herun New Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Chengwu Herun New Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Polyamide epoxy curing agents should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Chengwu Herun New Material Technology Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Chengwu Herun New Material Technology Co., Ltd. publishes Epoxy-accelerator development and production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Phenalkamine, modified-amine and polyamide hardener development and production depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Waterborne epoxy-hardener development and production is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Epoxy-system formulation and application support should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Chengwu Herun New Material Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Chengwu Herun New Material Technology Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Chengwu Herun New Material Technology Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Chengwu Herun New Material Technology Co., Ltd.: The resin portfolio may be relevant to continuous or closed-mold composite processing. Qualification should cover viscosity, mix ratio where applicable, gel or reaction profile, cure conditions, exotherm, reinforcement wet-out and the cured properties required by the actual line and section thickness.
Chengwu Herun New Material Technology Co., Ltd.'s source record currently includes Official Chengwu Herun Website, Herun Epoxy-Accelerator Directory, Herun Epoxy-Hardener Directory, Official Herun Product Workbook. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official identity, site, business scope, MIIT filing and 2026 updates.
Open catalogOfficial DMP-30, DMP-10, HR-7095, HR-7088 and BDMA entries.
Open catalogOfficial phenalkamine, modified-amine, polyamide and waterborne-amine grades.
Open catalogDownloadable product workbook linked by the official site.
Open catalogOrganizer-published matching identity, 2026 booth 8S01, categories and design capacities.
Open catalog
Techstorm Advanced Material Corporation Limited is a Shanghai-headquartered developer and manufacturer of high-performance thermoset materials and identifies itself on its official site by Shanghai Stock Exchange code 601026.SH. Its published portfolio spans wind energy, general composites, new-energy vehicles and industrial adhesives, electrical insulation, and photovoltaics. For general composites, Techstorm lists resin systems for filament-wound cylinders, cable core rods and glass- or carbon-fiber wind-blade spar-cap pultrusion, flame-retardant aircraft seating, carbon-fiber prepreg, and HP-RTM or prepreg battery covers.
ALTA Performance Materials is a global manufacturer and supplier of high-performance thermoset resins and gelcoats for composite materials. Its official modern-slavery statement says ALTA Performance Materials Holdings Company (UK) Limited and its affiliates operate 20 sites across the Americas, Europe, the Middle East and Asia. The official contact page lists a global headquarters in London and regional centers in Grandview, Barcelona, Navi Mumbai, Shanghai and Araçariguama. ALTA publishes applications across building materials, corrosion-resistant FRP, recreation, transportation and wind energy. These footprint and business statements are company-published and have not been independently verified by GetFRP.
Wanhua Chemical is a global advanced-materials and chemical producer headquartered in Yantai, Shandong. Its official site organizes the business across polyurethanes, petrochemicals, performance chemicals and emerging materials, with 14 principal production complexes in China and Europe. For composites, Wanhua publishes foaming and non-foaming polyurethane resin systems, glass-fiber-reinforced PU pultrusion and HP-RTM solutions, plus specialty amines and epoxy-curing-agent raw materials for FRP, high-pressure pipe, prepreg and laminate applications. The present company was established in 1998, with operating roots in a synthetic-leather and MDI project begun in 1978.