Maikos Composites is presented as a source-reviewed supplier profile centered on Composite Mold Release Agents, with company-published capability separated from buyer-side verification requirements.
Maikos Composites Co., Ltd. is the English identity used by, a mainland-China mold-release materials business in Dongguan, Guangdong. China Composites Expo lists the exhibitor under the DEAWA brand. The company's official legal statement says that the Deawa/ and Maikos/ marks and the deawa.cn, maikos.com.cn and deawa.net domains belong to and are operated by the Dongguan legal entity. GetFRP therefore deduplicates those brands and domains into this one mainland supplier rather than creating separate Deawa and Maikos companies. A company article published in 2019 says the business began introducing, researching and developing release agents and mold sealers in 2001, while the current Chinese overview describes 26 years of focus. This profile records 2001 as the company-published operating start, not as independently verified incorporation evidence.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for formulators, compounders and procurement teams comparing additive chemistry, dispersion, process compatibility, finished-material performance and regulatory evidence. It organizes Maikos Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Maikos Composites Composite Mold Release Agents.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Maikos Composites Co., Ltd. currently lists 8 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Maikos' current official sites center on the research, production and sale of release agents for carbon-fiber, glass-fiber, rubber and thermoset-resin molding under the Maikos and Deawa brands. Published categories include composite and rubber release agents, mold cleaners and mold sealers, with application references spanning wind energy, transport, aerospace, sporting goods, yachts, grating, sanitary products, tires and polyurethane. China Composites Expo classifies DEAWA under mould release materials and likewise describes a composite-release focus. Industry coverage, customization, 2,000-plus users and 24-hour on-site response are company claims rather than verified customers, formula scope, capacity or service commitments. An official deawa 7300 page describes a semi-permanent release agent for heat-cured epoxy composite fiber and unsaturated resin, with a colorless appearance, density of 0.715±0.02, one-year shelf life, room-temperature application, stated cured stability at 400°C and reference application of three to four coats on a new mold or two to three on an older mold. The same site says its information is not a substitute for field selection and that users must test, so GetFRP does not extend these typical values to other grades or treat them as purchase guarantees. An RFQ should identify the grade and current TDS/SDS revision; water- or solvent-based chemistry; silicone and transferable content; active solids; mold material and surface; resin system; molding temperature and cycle; wipe or spray method; flash time; expected releases and cleaning interval. If parts will be bonded, painted, gel-coated or plated, test transfer, surface energy, adhesion and contamination. For flammable solvent systems, verify VOC, flash point, ventilation, explosion protection, PPE, dangerous-goods class, UN number, pack and transport. Require lot-linked COA fields, shelf life and storage, pack size, MOQ, lead time, formula and site change notification, traceability and complaint handling. Qualify cleaner, sealer and release agent as one system on a representative mold and process, recording cleaning, coats, dry time, first-part finish, release-force trend, consecutive releases, buildup, mold effects and downstream adhesion. The English site and China contact channels are initial export-readiness signals; confirm contracting/export entity, English labels and SDS, destination chemical rules, DG declaration, Incoterm, payee and traceability. No official certificate with complete legal identity, standard, number, scope, issuer and current validity was found, so none is recorded as verified.
No company-level certification is listed on this profile.
Evaluate Maikos Composites Co., Ltd. as a potential composite additive and functional-filler supplier for Semi-permanent composite mold release agents, verify the public evidence and prepare a comparable RFQ.
Maikos Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Release agents for carbon-fiber and fiberglass products, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Maikos Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Maikos Composites Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Maikos Composites Co., Ltd. publishes Composite release-agent formulation and production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Water-based and solvent-based product formulation depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Sample matching to resin, mold and process conditions (company claim) is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Integrated mold cleaning, sealing and release systems should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Maikos Composites Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Maikos Composites Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Maikos Composites Co., Ltd.'s release-agent scope can be screened only against the intended resin, mold surface, temperature and cycle. Buyers should define internal or external use, dosage, application method, buildup and cleaning limits, effects on bonding or coating, trial acceptance and controls for formulation changes.
Maikos Composites Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Maikos Composites Co., Ltd.'s source record currently includes Official Deawa Chinese Website, Official Maikos Chinese Website, Deawa Official Legal Statement, Deawa Company Profile. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Techstorm Advanced Material Corporation Limited is a Shanghai-headquartered developer and manufacturer of high-performance thermoset materials and identifies itself on its official site by Shanghai Stock Exchange code 601026.SH. Its published portfolio spans wind energy, general composites, new-energy vehicles and industrial adhesives, electrical insulation, and photovoltaics. For general composites, Techstorm lists resin systems for filament-wound cylinders, cable core rods and glass- or carbon-fiber wind-blade spar-cap pultrusion, flame-retardant aircraft seating, carbon-fiber prepreg, and HP-RTM or prepreg battery covers.
ALTA Performance Materials is a global manufacturer and supplier of high-performance thermoset resins and gelcoats for composite materials. Its official modern-slavery statement says ALTA Performance Materials Holdings Company (UK) Limited and its affiliates operate 20 sites across the Americas, Europe, the Middle East and Asia. The official contact page lists a global headquarters in London and regional centers in Grandview, Barcelona, Navi Mumbai, Shanghai and Araçariguama. ALTA publishes applications across building materials, corrosion-resistant FRP, recreation, transportation and wind energy. These footprint and business statements are company-published and have not been independently verified by GetFRP.
Wanhua Chemical is a global advanced-materials and chemical producer headquartered in Yantai, Shandong. Its official site organizes the business across polyurethanes, petrochemicals, performance chemicals and emerging materials, with 14 principal production complexes in China and Europe. For composites, Wanhua publishes foaming and non-foaming polyurethane resin systems, glass-fiber-reinforced PU pultrusion and HP-RTM solutions, plus specialty amines and epoxy-curing-agent raw materials for FRP, high-pressure pipe, prepreg and laminate applications. The present company was established in 1998, with operating roots in a synthetic-leather and MDI project begun in 1978.
Official product catalogs, web directories and technical guides published by the supplier.
Current brand, legal identity, products, applications and contact route.
Open catalogMaikos-brand products and company profile for the same legal entity.
Open catalogLegal entity, marks, domain ownership, address and official email.
Open catalogRelease-agent focus, two brands, applications and company-published support scope.
Open catalogCompany-published use, typical properties, reference application and limitations.
Open catalogDongguan address, mobile, fax, email and company domains.
Open catalogExhibitor source for the brand, booth, release-material category and applications.
Open catalog