Pultruded grating
T-bar pedestrian and I-bar industrial constructions, plus deeper and high-open-area options described by the supplier.
F1-GRID · INDUSTRIAL FLOORING AND ACCESS
F1 Composites FRP Grating and Access Systems
F1-GRID is GetFRP's buyer-oriented grouping for F1 Composites pultruded grating, molded grating, closed deck panels, stair products and related access components. They can form one package, but their span behavior, drainage and support requirements differ.
Reviewed 1 September 2026
Supplier-reported / GetFRP editorial grouping
Published dimensions and options support initial selection. Final span, load, deflection, slip resistance, resin, fire performance and fasteners require product- and project-specific confirmation.
Pultruded grating carries primarily in the bearing-bar direction, molded grating distributes load in two directions, and closed deck panels create a substantially closed surface. Select the construction before comparing panel prices.
PRODUCT TYPES
What this family covers
Molded grating and deck
Square, mini-mesh and rectangular molded panels, together with more continuous closed-deck surfaces.
Stairs and access components
Tread covers, complete grating treads, handrail members, posts, toe boards, ladders and stainless-steel clips.
APPLICATION FIT
Where to evaluate it—and where to pause
Typical fit
Chemical and water-treatment plants, cooling towers, coastal or offshore access, electrical substations and industrial maintenance platforms.
Selection boundary
Pedestrian access, concentrated maintenance loads, trolley traffic, accessible routes, escape paths and stairways impose different design requirements.
EVIDENCE BOUNDARIES
What the published evidence does—and does not—support
Published range
F1 publishes multiple pultruded and molded constructions, depths, mesh patterns, open areas and concave or grit surface options.
Project evidence required
GetFRP has not confirmed one third-party report that proves load, slip, chemical or fire performance for the entire range. Tie approval to the exact construction and support layout.
RFQ CHECKLIST
Give the supplier a controlled starting point
- 1Grating type, clear span, bearing direction, loads and deflection limit
- 2Mesh or open area, drainage, panel layout, cut-outs and supports
- 3Surface, slip requirement, resin, fire, chemical, temperature and UV exposure
- 4Clip geometry, tread or handrail scope, quantity, documents, destination and date
Official sources
Source links open F1 Composites' official website or its published documents.