FAW Fujie Fujia AVIC Carbon Fiber is presented as a source-reviewed supplier profile centered on Automotive CF structural parts, with company-published capability separated from buyer-side verification requirements.
Joint venture between FAW Fujie and AVIC Composite, supplying carbon fiber parts for FAW Hongqi NEV programs.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “FAW Fujie Fujia AVIC Carbon Fiber Automotive CF structural parts.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. currently lists 3 product or service groups and 2 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Joint venture between FAW Fujie and AVIC Composite, supplying carbon fiber parts for FAW Hongqi NEV programs.
Evaluate FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. as a potential composite product manufacturer for Automotive CF structural parts, verify the public evidence and prepare a comparable RFQ.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For CF roof panels, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. publishes RTM as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Wet compression depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Composite products that look similar can use different reinforcement orientations, resin systems, fillers, veils and cure schedules. A useful comparison therefore records the construction behind each quoted property and separates typical catalog values from guaranteed acceptance values. If a supplier proposes an alternative construction, the deviation should be visible in the quotation and supported by a new technical review rather than accepted as an equivalent by name alone.
First-article approval should reproduce the intended production route. Record dimensions, mass, appearance, material batch, process settings that affect quality and the results of agreed tests. Keep the signed sample or inspection record under revision control so later shipments are compared with the approved baseline. For custom parts, clarify ownership and storage of molds, dies, gauges and inspection fixtures before paying tooling charges.
Delivered cost includes more than ex-works price. Secondary machining, inserts, assembly, protective film, crating, inland transport, inspection and rejected-part replacement can change the commercial ranking of a shortlist. Ask each supplier to quote the same supply boundary and Incoterm, then normalize the offer against usable delivered quantity rather than nominal kilograms or square metres.
FAW Fujie Fujia AVIC Carbon Fiber Co., Ltd. does not yet have a complete official source set attached to this profile. The page can support discovery, but buyers should not rely on it for approval until the legal identity, official website and product evidence are documented.
The profile lists 1 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of not recorded. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
No eCatalog has been published yet.
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.