Guangdong Jinming New Materials Technology is a source-reviewed supplier profile for carbon fiber sheets, carbon fiber tube, and carbon fiber plate, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Guangdong Jinming New Materials Technology Co., Ltd. is the current Dongguan carbon-fiber-products exhibitor listed by China Composites Expo. The organizer dates the business to 2012 and describes roll-wrapped tube, compression-molded shaped-part, pull-braided tube and hand-lay-up operations for carbon-fiber tubes, plates and molded products. The matching current jmfiber.cn website still displays the earlier label Dongguan Jinming Composite Materials Co., Ltd., but publishes the same Dongguan location, tube, plate, roll-wrapping, pull-braiding and molding scope and robot, UAV, sports, photography, medical and automotive components. GetFRP deduplicates the current expo identity and the website's legacy label as one supplier while disclosing the boundary; no independent corporate-name-change filing was reviewed. The site also lists colored fiberglass round tubes. No specific carbon-fiber fishing-rod product page was found, so that search phrase is not assigned.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber sheets, carbon fiber tube, carbon fiber plate, and custom carbon fiber tubing. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Guangdong Jinming New Materials Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Guangdong Jinming New Materials Technology Roll-wrapped carbon fiber tubes and large-diameter.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Guangdong Jinming New Materials Technology Co., Ltd. currently lists 10 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Jinming's official site organizes its catalog into all products, carbon-fiber tubes, roll-wrapped, pull-braided, molded, aerospace or technology, photography, sporting, robotic, medical, fashion and custom products. Specific entries include custom sheets, pull-braided panels, shaped and large-diameter tubes, robot arms, UAV shells, paddles, wheelchairs, quivers and colored fiberglass tubes. The website states tube thickness tolerance as tight as ±0.1 mm, but does not define the applicable diameter, length, wall, process, measurement method or sampling scope, so it must be reconfirmed in the current drawing and inspection plan. A tube RFQ should lock round, square or shaped geometry; inside and outside dimensions; wall; length; straightness; roundness; concentricity; taper; lay-up or braid angle; fiber and resin grade; cosmetic texture and gloss; ends; holes; bonding and balance. A sheet RFQ should define size, thickness, 0/90 or quasi-isotropic lay-up, flatness, face, machining, edge sealing and assembly loads. Roll wrapping, pull-braiding, compression molding and hand lay-up should not be combined under a generic carbon-products quote; separately qualify tooling, material lot, lay-up or braid, cure, molding pressure, voids, dimensions and appearance. Robot arms, UAVs, medical, photography and automotive parts need project-specific interfaces, mass, stiffness, fatigue, impact, environment and relevant flame, biocompatibility or industry requirements. Website application categories are not design approval or customer certification. Sporting goods should be sourced against a named product drawing and performance specification. The site publishes a carbon-fiber paddle, but no verifiable carbon-fiber fishing-rod product was reviewed, so that phrase must not be inferred from the sports category. Require TDS and SDS for the proposed materials and process, raw-material and finished-part CoA fields, first article, dimensional and cosmetic report, representative destructive or NDT evidence, tooling ownership, change notification and nonconformance handling. The site has an ISO 9001 entry, but this review did not obtain a legible current certificate showing the current legal entity, number, scope, issuer and validity; no certification is recorded as verified. Separate tooling, samples, recurring unit price, MOQ, secondary machining, coating, inspection, packing and Incoterm, and confirm whether Guangdong Jinming or the legacy website entity will contract, invoice, receive payment and export.
No company-level certification is listed on this profile.
Evaluate Guangdong Jinming New Materials Technology Co., Ltd. as a potential composite product manufacturer for carbon fiber sheets, verify the public evidence and prepare a comparable RFQ.
Guangdong Jinming New Materials Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Custom carbon fiber tubes and shaped tubing, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Guangdong Jinming New Materials Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
Guangdong Jinming New Materials Technology Co., Ltd. publishes Prepreg roll wrapping and large-diameter tube forming as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Continuous pull-braiding and braided reinforcement forming depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Carbon fiber plate and sheet forming is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Guangdong Jinming New Materials Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Guangdong Jinming New Materials Technology Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Guangdong Jinming New Materials Technology Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Guangdong Jinming New Materials Technology Co., Ltd.'s source record currently includes Official Jinming Website, Jinming Carbon Fiber Product Directory, Jinming Company Profile, Official Jinming Contact. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, product and contact entry.
Open catalogTubes, sheets, roll-wrapped, pull-braided, molded and application parts.
Open catalogOfficial legacy entity label and capability description.
Open catalogOfficial telephone, email and Dongguan address.
Open catalogOrganizer source for the current Guangdong Jinming entity and process scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.