Jiangsu Bocheng New Tech Materials is a source-reviewed supplier profile for fiberglass cloth and fiberglass roll, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Jiangsu Bocheng New Tech Materials Co., Ltd. manufactures PTFE- and silicone-coated fiberglass textiles, fiberglass-cloth tapes and industrial belts in Taixing. Its current official catalog and China Composites Expo listing support brown PTFE glass fabric, black antistatic PTFE glass fabric, PTFE adhesive tape, open-mesh and coated conveyor belts, silicone-coated fiberglass, and converted components. GetFRP maps the measured-demand phrase fiberglass cloth only to these published coated-glass substrates; it does not present Bocheng as a producer of raw glass fiber, roving or uncoated reinforcement fabric. The official site offers dimensional and performance customization, but buyers must confirm the exact base cloth, coating formulation, conversion scope and manufacturing location in the quotation. Establishment date, management systems, capacity and regulatory suitability remain unverified until matched to current legal-entity and product files.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass cloth and fiberglass roll. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu Bocheng New Tech Materials Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Jiangsu Bocheng New Tech Materials Fiberglass Fabrics.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu Bocheng New Tech Materials Co., Ltd. currently lists 8 product or service groups and 8 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Bocheng's official catalog centers on PTFE-coated fiberglass fabric, fiberglass-cloth adhesive tape, open-mesh and coated conveyor belts, silicone-coated fabric, and converted components. A fabric RFQ should define the glass base-cloth weave and mass, finished thickness, PTFE loading, number of coating passes, color, surface texture, porosity, electrical surface resistance where antistatic performance is required, release behavior, temperature cycle, usable width and roll length. Brown general-purpose, black antistatic, open-mesh and silicone-coated constructions serve different duties and should not be substituted under a generic Teflon-cloth description. Tape inquiries additionally need adhesive chemistry, peel target, service temperature, release liner, roll core, width, length and shelf life. Conveyor-belt projects should provide circumference, width, mesh or solid construction, joint type, edge reinforcement, guides or fasteners, working tension, line speed, operating temperature, tracking tolerance and contact material. Cut, molded or formed components require a controlled drawing, dimensional tolerances, edge treatment, tooling responsibility, inspection plan and packaging. Website statements that dimensions, coating color and performance can be customized should be converted into a written specification and approved sample rather than treated as an unlimited capability guarantee. Buyers should request current TDS, SDS, lot COA and any application-specific food-contact, electrical or flame documentation, then confirm that each document names the quoted product and responsible legal entity. Published scale, certifications and performance remain supplier claims until that review is complete.
No company-level certification is listed on this profile.
Evaluate Jiangsu Bocheng New Tech Materials Co., Ltd. as a potential composite product manufacturer for fiberglass cloth, verify the public evidence and prepare a comparable RFQ.
Jiangsu Bocheng New Tech Materials Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Black antistatic PTFE-coated fiberglass fabric, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu Bocheng New Tech Materials Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Jiangsu Bocheng New Tech Materials Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for PTFE open-mesh conveyor belts should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Jiangsu Bocheng New Tech Materials Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Jiangsu Bocheng New Tech Materials Co., Ltd. publishes Fiberglass base-cloth impregnation as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Multiple-pass PTFE dispersion coating depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Antistatic coating formulation and finishing is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Silicone-rubber coating and curing should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Jiangsu Bocheng New Tech Materials Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu Bocheng New Tech Materials Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Jiangsu Bocheng New Tech Materials Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Jiangsu Bocheng New Tech Materials Co., Ltd.: The published product scope can support an initial discussion for engineered composite components. Buyers should identify the governing drawing, laminate or material definition, load and environment, dimensional tolerance, finish and inspection method before treating a catalog item as a production match.
Jiangsu Bocheng New Tech Materials Co., Ltd.'s source record currently includes Bocheng Official Website, About Bocheng, PTFE-Coated Fiberglass Fabric, PTFE Adhesive Tape. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company and product entry.
Open catalogCompany scope and published customization.
Open catalogOfficial coated-fiberglass category.
Open catalogOfficial fiberglass-cloth tape category.
Open catalogOfficial open-mesh belt category.
Open catalogPublished Taixing address, phone and email.
Open catalogOrganizer source for exhibitor identity and scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.