Jiangsu Changhai Composite Materials Holding is a source-reviewed supplier profile for chopped strand mat, fiberglass cloth, and fiberglass panels, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Jiangsu Changhai Composite Materials Holding Co., Ltd. is a Changzhou supplier of glass-fiber reinforcement and thermoplastic composite materials. Its current official catalog and the 2026 China Composites Expo directory support roving, chopped strands, chopped strand mat, surface and continuous mat, woven roving, biaxial and stitched combinations, mesh, LFT reinforcement, CFRT tape and glass-reinforced thermoplastic panels. GetFRP assigns measured-demand phrases such as chopped strand mat, fiberglass cloth, fiberglass mat, fiberglass chopped strand mat and fiberglass panels only to these published products. The thermoplastic honeycomb offer is described as a core with continuous-glass-fiber-reinforced CFRT skins, not as a solid fiberglass panel or a claim that every honeycomb grade contains glass. Product-specific roving end uses do not mean Changhai manufactures the customer's finished pipe, SMC part or pultruded profile. The complete current logo was downloaded on 2026-08-26 from the exact CDN asset referenced by the official header, trimmed only to remove transparent canvas, and stored locally by GetFRP. Capacity, market-position and certification statements remain company claims pending certificate- and plant-level verification.
The reviewed product and process scope makes this supplier relevant to buyer searches for chopped strand mat, fiberglass cloth, fiberglass panels, and fiberglass mat. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu Changhai Composite Materials Holding Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Jiangsu Changhai Composite Materials Holding Glass fiber chopped strand mat.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu Changhai Composite Materials Holding Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Changhai's official catalog is organized around roving, glass-fiber products and thermoplastic composites. Roving families include mat yarn, transparent-panel yarn, continuous-pipe roving, SMC roving, winding direct roving, pultrusion direct roving, weaving direct roving and spray-up roving. Those names state the recommended conversion process; they do not mean Changhai supplies the customer's finished pipe, panel, SMC part or pultruded profile. A roving RFQ should define glass type, linear density, sizing chemistry, resin compatibility, moisture, fuzz, stiffness, dispersion or wet-out, package weight and packing. Chopped strand mat needs the powder or emulsion binder, areal weight, width, roll length, styrene solubility, tensile handling strength, moisture and target resin. Surface mat, continuous mat, wet-laid mat and coated mat are not substitutes. Woven roving, biaxial or multiaxial fabric, stitched mat, combination mat and mesh inquiries should lock architecture, direction, areal weight, stitch yarn, width, roll, splice rules, appearance and resin permeability. The thermoplastics portfolio includes PA6 or PA66 chopped strands, LFT direct roving, CFRT continuous prepreg tape, continuous-glass-reinforced polypropylene panels and CFRT-skinned honeycomb panels. Specify matrix grade, glass content, fiber length or orientation, tape width and thickness, panel gauge and format, lay-up, surface film, voids, flexural and impact targets, heat resistance, flame behavior, warpage and processing window. A honeycomb inquiry additionally needs core material, cell size, density, skin build-up, peel and shear requirements and edge closure. Battery separators and vacuum-infusion core materials should be ordered from a named technical data sheet rather than a broad category label. The complete official logo was downloaded on 2026-08-26 from the exact CDN asset referenced by the page, trimmed only to remove transparent canvas, and stored locally rather than hotlinked. Published scale, management systems, market position and quality statements were not supported in this review by an independently matched certificate chain for legal holder, address, scope, number and validity date; certifications and supported standards therefore remain empty. Buyers should request current originals, test reports, samples and lot COAs before approval.
No company-level certification is listed on this profile.
Evaluate Jiangsu Changhai Composite Materials Holding Co., Ltd. as a potential composite product manufacturer for chopped strand mat, verify the public evidence and prepare a comparable RFQ.
Jiangsu Changhai Composite Materials Holding Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Glass fiber surface mat, continuous mat and wet-laid mat, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu Changhai Composite Materials Holding Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
Jiangsu Changhai Composite Materials Holding Co., Ltd. publishes Glass-fiber forming and sizing-system adaptation as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Assembled and direct-roving production depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Glass-fiber chopping and dispersion is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu Changhai Composite Materials Holding Co., Ltd.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Jiangsu Changhai Composite Materials Holding Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Jiangsu Changhai Composite Materials Holding Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Jiangsu Changhai Composite Materials Holding Co., Ltd.'s source record currently includes Changhai Official Products, Glass Fiber Roving, Glass Fiber Products, Chopped Strand Mat. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-26. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Roving, glass products and thermoplastics.
Open catalogRoving families by conversion process.
Open catalogMats, fabrics, mesh and combinations.
Open catalogOfficial chopped-strand-mat detail.
Open catalogChopped, LFT, CFRT tape and panels.
Open catalogPublished Changzhou address, export phone and email.
Open catalogOrganizer source for exhibitor identity.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.