Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) is a source-reviewed supplier profile for carbon fiber sheets, pultruded, and carbon fiber plate, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Jiangsu Junhua HPP Co., Ltd., marketed as Junhua PEEK, is a Changzhou supplier of PEEK and PI special-polymer materials. Its 2026 China Composites Expo page and official catalog support neat PEEK5600G, glass-filled GF30, carbon-filled CF30, bearing-grade LF30, extruded PEEK shapes, injection molding and CNC-machined parts. The group website also publishes continuous-carbon-fiber/PEEK sheet, pultruded rod, support beam, glass-fiber/PEEK radome and continuous-fiber thermoplastic prepreg. GetFRP assigns measured-demand phrases including carbon fiber sheets, carbon fiber plate, carbon fiber products and pultruded only to those explicit products, and identifies them as PEEK thermoplastic composites rather than generic epoxy carbon laminates. Junhua's official subsidiary page says Changzhou Junhang focuses on continuous carbon- or glass-fiber reinforced PEEK, PEKK, PPS and PEI prepreg, plates and products. Those offers are therefore labeled group or Junhang inquiries; a buyer must confirm whether Jiangsu Junhua, Junhang or another affiliate will manufacture and contract the scope. Website certifications and performance claims remain unverified at legal-entity and certificate level.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber sheets, pultruded, carbon fiber plate, and carbon fiber panels. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK)'s published products, processes, certificate references and official sources around the primary topic “Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) PEEK5600G neat PEEK resin and pellets.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Junhua's parent-company portfolio begins with neat PEEK5600G, glass-fiber-reinforced PEEK5600GF30, carbon-fiber-reinforced PEEK5600CF30 and the carbon-fiber, graphite and PTFE bearing grade PEEK5600LF30, together with PEEK sheet, rod, tube, custom profiles, injection-molded parts and CNC components. A resin or compound RFQ should specify base polymer, melt viscosity, reinforcement type and loading, other fillers, color, pellet size, moisture, lot COA, melt and mold-temperature windows, crystallization and annealing, plus mechanical, thermal, tribological, electrical and chemical targets. An extruded shape or machined-part order needs material grade, forming route, annealed condition, dimensions, tolerances, warpage, surface, internal-defect limit, cleanliness, thread and hole details, measurement method and material traceability. A continuous-carbon-fiber/PEEK plate should not be purchased from the broad phrase carbon fiber sheets alone. Freeze carbon grade, fiber volume, UD or woven architecture, lay-up, PEEK content, gauge and format, voids, crystallinity, Tg and Tm, flexural and interlaminar properties, impact, ultrasonic inspection, thermoforming and welding requirements. Continuous-fiber PEEK, PEKK, PPS and PEI prepreg, pultruded rod, support beam and GF/PEEK radome appear on official group pages, while Junhua's subsidiary page explicitly identifies Changzhou Junhang as the specialist for these continuous-fiber materials and products. The RFQ, NDA, prototype PO and serial contract must therefore name the legal entity, plant, tooling and IP ownership, material-lot control and quality responsibility; a group catalog is not automatic evidence of manufacture by the Jiangsu parent. The website displays or states AS9100D, ISO and IATF systems, but this review did not obtain current certificate files aligned to holder, address, product scope, number and validity. Certifications and supported standards remain empty. Medical, aerospace, semiconductor and other regulated uses require buyer qualification for the exact grade, regulatory route, change control and validation plan.
No company-level certification is listed on this profile.
Evaluate Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) as a potential composite product manufacturer for carbon fiber sheets, verify the public evidence and prepare a comparable RFQ.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For PEEK5600GF30 glass-fiber-reinforced PEEK compound, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) should be identified explicitly rather than treated as automatically equivalent.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK) publishes PEEK compounding and fiber-reinforced modification as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Extrusion of PEEK rod, sheet, tube and profiles depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, PEEK injection molding is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK): A radome RFQ should define frequency bands, transmission loss, reflection, dielectric properties, antenna clearance, section drawing, material, finish, wind and ice loads, UV and weather exposure, mounting, drainage and dimensional tolerance. Require representative radio-frequency, mechanical and environmental test evidence for the offered construction rather than a generic material statement.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK)'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK)'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Jiangsu Junhua HPP Co., Ltd. (Junhua PEEK)'s source record currently includes Official Junhua PEEK Website, Junhua Product Center, Composite Materials Applications, CF/PEEK Composite Sheet. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, material and application entry.
Open catalogPEEK resins, shapes and parts.
Open catalogContinuous-fiber PEEK composite scope.
Open catalogContinuous-carbon-fiber/PEEK sheet detail.
Open catalogOfficial entity boundary for continuous-fiber thermoplastics.
Open catalogPublished Changzhou head-office contact.
Open catalogOrganizer source for exhibitor identity and scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.