Jiangsu Shino New Material Technology is presented as a source-reviewed supplier profile centered on Shinofil high-strength high-modulus polyimide, with company-published capability separated from buyer-side verification requirements.
Jiangsu Shino New Material Technology Co., Ltd. is a Wujin, Changzhou supplier of high-performance polyimide fiber and fabric. Its current official catalog publishes six families: high-strength high-modulus continuous fiber, high-temperature continuous fiber, staple fiber, woven fabric, fabricated fiber products and Astra fibrous material. Product pages publish an S10T high-temperature fiber and W-60, W-100 and W-200 fabric specifications. The 2026 China Composites Expo lists the company for high-performance polyimide fiber. Polyimide is a high-performance organic fiber; it is not aramid, carbon fiber or fiberglass. This profile therefore uses accurate polyimide fiber and fabric language and does not borrow traffic phrases from adjacent reinforcement materials. Official application pages mention composites, flexible envelopes, radomes, ropes and high-temperature protection, but qualification still has to be conducted by grade, denier, areal weight, weave and interface requirement.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Jiangsu Shino New Material Technology Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Jiangsu Shino New Material Technology Shinofil high-strength high-modulus polyimide.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Jiangsu Shino New Material Technology Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Polyimide-fiber sourcing begins by separating high-strength high-modulus filament, heat-resistant filament, staple, fabric and fabricated products. A filament RFQ should lock grade, denier or linear density, filament count, sizing or surface state, twist, package, tensile strength, initial modulus, elongation, density, moisture or regain, limiting oxygen index, glass-transition temperature, continuous and short-term service temperature, creep, abrasion, radiation resistance, dielectric behavior, thermal expansion, conductivity, acid, alkali and solvent resistance, and lot variation. The S10T values on the official page are company-published specifications or typical data; the contract must name methods, conditions, sample count and acceptance values. Staple also needs length distribution, crimp, finish, dispersion and compatibility with the matrix or nonwoven route. A fabric RFQ should define W-60, W-100, W-200 or a custom construction, fiber denier, ends and picks, weave, areal weight, thickness, width, roll length, strip strength, skew or bow, fuzz, defects, thermal shrinkage, surface treatment and resin wet-out. Published 60, 100 and 200 g/m² constructions and their thickness or strength data cannot be extrapolated across styles. Flexible envelopes, radomes, low-expansion composites, ropes, nuclear or protective uses add coating or sealing, dielectric transmission, flame, smoke and toxicity, aging, folding, fatigue, UV, damp heat and regulatory responsibility. Require current TDS and SDS, lot CoA, traceable roll numbers, controlled samples, raw-material and process change notice, moisture-protective packing, storage life and complaint retention samples. The website discusses standard drafting, patents, projects and qualifications, but no source certificate or third-party report was obtained that aligns company, address, scope, number, product and validity. Certifications and supported standards remain empty.
No company-level certification is listed on this profile.
Evaluate Jiangsu Shino New Material Technology Co., Ltd. as a potential composite product manufacturer for Shinofil high-strength high-modulus polyimide continuous fiber, verify the public evidence and prepare a comparable RFQ.
Jiangsu Shino New Material Technology Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Shinofil S10T high-temperature polyimide continuous fiber, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Jiangsu Shino New Material Technology Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Jiangsu Shino New Material Technology Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for W-60 lightweight polyimide woven fabric should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Jiangsu Shino New Material Technology Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Jiangsu Shino New Material Technology Co., Ltd. publishes High-performance polyimide polymerization and spinning as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Continuous manufacture of high-strength high-modulus filament depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, High-temperature polyimide filament manufacture is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Polyimide staple cutting and post-treatment should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Jiangsu Shino New Material Technology Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Jiangsu Shino New Material Technology Co., Ltd.: A radome RFQ should define frequency bands, transmission loss, reflection, dielectric properties, antenna clearance, section drawing, material, finish, wind and ice loads, UV and weather exposure, mounting, drainage and dimensional tolerance. Require representative radio-frequency, mechanical and environmental test evidence for the offered construction rather than a generic material statement.
Jiangsu Shino New Material Technology Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Jiangsu Shino New Material Technology Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Jiangsu Shino New Material Technology Co., Ltd.'s source record currently includes Official Jiangsu Shino Website, Jiangsu Shino Product Center, Polyimide Fabric Specifications, S10T High-Temperature Fiber. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, product, application and contact entry.
Open catalogFilament, staple, fabric, fabricated products and Astra.
Open catalogW-60, W-100 and W-200 data.
Open catalogS10T mechanical, thermal and environmental data.
Open catalogPublished Changzhou addresses, telephones and company email.
Open catalogOrganizer source for the Shino entity and polyimide-fiber scope.
Open catalog