Lanxi Joen Fiberglass is a source-reviewed supplier profile for fiberglass cloth, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Lanxi Joen Fiberglass Co., Ltd. supplies fiberglass textiles and coated, laminated or sewn conversions under the JOEN name. Its current official catalog supports fiberglass cloth, silicone-coated glass fabric, aluminum-foil laminated glass fabric, fire blankets, vehicle fire blankets, welding protection, fire-resistant bags and welding or safety enclosures. GetFRP maps the measured-demand phrase fiberglass cloth to the published glass fabric and does not infer raw roving or unrelated composite panels. The official site traces the operating business to 2001, while public legal-entity sources use a different date; the profile therefore leaves establishment blank rather than converting a brand or operating-history date into a verified incorporation date. The website also discusses an acquired Nanjing coating company and a Jiangxi affiliate. Buyers must confirm which legal entity and plant manufactures each coated or converted item instead of automatically assigning affiliate operations to the Lanxi company.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass cloth. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Lanxi Joen Fiberglass Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Lanxi Joen Fiberglass Fiberglass Fabrics.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Lanxi Joen Fiberglass Co., Ltd. currently lists 9 product or service groups and 9 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
JOEN's official site presents a chain from fiberglass weaving and after-treatment through coating, lamination, cutting, sewing and finished safety products. A base-fabric RFQ should define glass type, yarn construction, weave, areal weight, thickness, usable width, roll length, finish or sizing, edge fray, appearance and compatibility with the intended coating, resin or thermal duty. Silicone-coated fiberglass inquiries need one- or two-side construction, silicone chemistry and loading, color, thickness, continuous and peak temperature cycle, flame behavior, oil or chemical exposure, flexibility and adhesion. Aluminum-foil laminated fabric additionally requires foil gauge, adhesive system, reflective-face orientation, peel target, water-vapor or thermal objective and seam construction. Fire blankets, welding blankets, vehicle blankets and fire-resistant bags are finished safety products, not interchangeable fabric rolls. The RFQ should state the actual hazard, object dimensions, deployment method, number and position of handles, seam and thread, edge binding, eyelets or other hardware, folding and storage arrangement, labeling, packaging and model-specific test evidence. Welding booths and modular safety enclosures require layout drawings, frame responsibility, curtain overlap, viewing windows, ventilation or extraction interfaces and installation boundaries. JOEN's corporate page describes a 2001 operating origin, acquisition of a Nanjing coating business and later investment in a Jiangxi affiliate. GetFRP does not translate those statements into a verified incorporation year or assume that all affiliate products are made by the Lanxi legal entity. Quotations should identify manufacturer, factory, seller, country of origin and certificate holder. Published management systems, capacity, flame ratings and performance remain supplier claims until current reports and certificates are matched to the exact product, legal holder, address, scope and validity.
No company-level certification is listed on this profile.
Evaluate Lanxi Joen Fiberglass Co., Ltd. as a potential composite product manufacturer for fiberglass cloth, verify the public evidence and prepare a comparable RFQ.
Lanxi Joen Fiberglass Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Silicone-coated fiberglass fabric, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Lanxi Joen Fiberglass Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Lanxi Joen Fiberglass Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Fiberglass fire blankets should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Lanxi Joen Fiberglass Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Lanxi Joen Fiberglass Co., Ltd. publishes Fiberglass weaving as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Fabric after-treatment and finishing depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Silicone-rubber coating and curing is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Aluminum-foil lamination to fiberglass fabric should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Lanxi Joen Fiberglass Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Lanxi Joen Fiberglass Co., Ltd.'s listed thermal textiles and converted products can be screened for welding barriers, smoke curtains, removable equipment insulation and other hot-work protection. The RFQ should define substrate and coating, continuous and peak temperature, flame or molten-splash exposure, heat flux, back-face limit, dimensions, layers, seams, fasteners and maintenance. Require current test evidence for the exact offered construction; a catalog use of “fireproof” is not an approval by itself.
Lanxi Joen Fiberglass Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Lanxi Joen Fiberglass Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Lanxi Joen Fiberglass Co., Ltd.'s source record currently includes JOEN Official Website, About JOEN, JOEN Products, JOEN Contact. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, fabric and fire-product entry.
Open catalogPublished operating chain and affiliate history.
Open catalogFiberglass, coated-fabric and safety-product catalog.
Open catalogLanxi factory and export contact details.
Open catalogOrganizer source for the JOEN exhibitor identity.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.