Nanjing EFG is a source-reviewed supplier profile for fiberglass mat, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Nanjing EFG Co., Ltd., identified in public Chinese company-registration information as Nanjing Feige Industry & Trade Co., Ltd., is a Nanjing-based supplier of fiberglass and polyester nonwovens. Its official site positions the business as a producer and exporter of fiberglass mat and tissue, polyester mat, and reinforced or composite bases for waterproofing, with a current emphasis on facers for acoustic ceilings, insulation panels and gypsum board. The About page says the related business began in 2003, while the home page dates the waterproofing-fiberglass and composite-base brand to 2006. This profile uses the current Chinese entity's 2006 incorporation year and treats the earlier history as a company statement. Buyers should confirm the contracting entity, actual manufacturing site and quoted capabilities through the business license, factory audit and order documents.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass mat. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for materials engineers and converters evaluating reinforcement form, sizing compatibility, package quality and downstream process stability. It organizes Nanjing EFG Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nanjing EFG Fiberglass Tissue and Mat.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nanjing EFG Co., Ltd. currently lists 6 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Nanjing EFG's official directory covers fiberglass mat and tissue, fiberglass paper, tape, mesh and chopped strands, polyester mats, composite mats and ceramic-fiber mats. The company page also lists reinforced fiberglass mat, spunbond and reinforced polyester mat, fiberglass-polyester composite bases, mineral-coated materials, and facers for acoustic ceilings, insulation panels and gypsum board. Published applications include bituminous waterproofing membranes, road paving, roofing shingles, oil-and-gas or chemical pipe wrapping, sports flooring and moisture-resistant gypsum board. The site offers TDS documents, samples and customized support, but the public pages do not provide a complete grade-level specification system. Buyers should validate the quoted fiber and binder system, areal weight and MD/CD tensile properties, thickness and width tolerances, coating loading, perforation pattern, resin or bitumen compatibility, roll length and packaging, moisture and defect limits, TDS/SDS, batch COA, MOQ, lead time, current test documentation, and the contracting and manufacturing entities.
Evaluate Nanjing EFG Co., Ltd. as a potential composite reinforcement supplier for fiberglass mat, verify the public evidence and prepare a comparable RFQ.
Nanjing EFG Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Spunbond, reinforced and recycled polyester mats, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nanjing EFG Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nanjing EFG Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Facers for acoustic ceilings, insulation panels and gypsum board should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Nanjing EFG Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Nanjing EFG Co., Ltd. publishes Fiberglass and polyester nonwoven manufacture as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Reinforced and composite mat conversion depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Mineral coating and board-facer development is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Perforation, facing and roll-goods conversion should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Nanjing EFG Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nanjing EFG Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Nanjing EFG Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Nanjing EFG Co., Ltd.: The listed reinforcement products may be relevant to thermoset laminating, pultrusion, winding or molding programs. Buyers should confirm fiber type, sizing chemistry, tex or areal weight, roll or package format, moisture control and compatibility with the intended resin and line conditions.
Nanjing EFG Co., Ltd.'s source record currently includes Nanjing EFG Product Directory, Nanjing EFG Company Profile, Nanjing EFG Quality-Control Document, Nanjing EFG Contact Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 1 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-06. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official directory for fiberglass mats, paper, tape, mesh and chopped strands, plus polyester and composite mats.
Open catalogSupplier-published history, product and application range, factory imagery, equipment, market and service information.
Open catalogSupplier-hosted SGS document TR No. 20151202078; buyers should verify its document type and current applicability.
Open catalogOfficial Nanjing contact address, email and telephone numbers.
Open catalog
Changzhou Tianma Group Co., Ltd. is based in Xinbei District, Changzhou, Jiangsu. Both the official website and China Composites Expo identify this legal entity, while the website also notes its former identity as Building Materials Factory 253. The site traces the enterprise lineage to a state-planned project begun in 1960 and calls the business the cradle of China's FRP industry; 1960 is therefore presented here as the start of the organizational lineage, not the current legal entity's registration date. The published portfolio spans glass-fiber yarns and products, unsaturated polyester and vinyl ester resins, gelcoats and auxiliaries, SMC/BMC, finished FRP products, and wind-energy and photovoltaic composites. China Composites Expo lists the exhibitor as CHANGZHOU TIANMA GROUP CO., LTD. and publishes booth 7M06 for 2026. History, industry-position, scale, capacity, market and product-performance statements are company- or organizer-published and have not been independently verified by GetFRP.
China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.
Zhongfu Shenying Carbon Fiber Co., Ltd. was established in 2006 and is part of China National Building Material Group. The company develops, manufactures and sells carbon fiber and carbon-fiber composite materials, and was listed on the Shanghai Stock Exchange in 2022 under stock code 688295.