Nanjing Keerda Mould is presented as a source-reviewed supplier profile centered on FRP Pultrusion Dies, with company-published capability separated from buyer-side verification requirements.
Nanjing Keerda Mould Co., Ltd. is located in Zhongshan Science and Technology Park, Liuhe District, Nanjing. Its official website says the business was established in 1993 and previously operated as Taizhou Keerda Mould Co., Ltd., with a focus on FRP pultrusion-die design and manufacture. The current official directory shows dies for I-beams, H-sections, channels, large panels, round tubes, rectangular and right-angle profiles, together with window-and-door tooling, compression molds, hard-chrome plating, deep-hole machining and heat treatment.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for process engineers and manufacturers qualifying production tooling by drawing control, material, thermal design, tolerance and trial evidence. It organizes Nanjing Keerda Mould Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nanjing Keerda Mould FRP Pultrusion Dies.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nanjing Keerda Mould Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Keerda's official website positions FRP pultrusion dies as a core product and publishes examples for I-beams, H-sections, U-channels, die frames, large panels, round tubes, rectangular profiles and right-angle sections. It also lists window-and-door dies, compression molds, FRP products, hard-chrome surface treatment, deep-hole machining and heat treatment. The company profile says its related surface-treatment operation handles curved surfaces, deep grooves, deep and blind holes, internal and external spherical surfaces, screws, barrels and hot runners, and publishes an HRC 55–65 hardness claim. Buyers should confirm the profile drawing and tolerances, fiber and resin system, pull speed, tool-steel grade, cavity count and die length, heating zones and controls, chrome thickness and hardness, surface finish, straightness, trial material, first-article sample, spares, lead time and export packing during RFQ and die-trial acceptance.
Evaluate Nanjing Keerda Mould Co., Ltd. as a potential composite tooling and die supplier for FRP pultrusion dies and die frames, verify the public evidence and prepare a comparable RFQ.
Nanjing Keerda Mould Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Pultrusion dies for I-beams, H-sections, channels and large panels, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nanjing Keerda Mould Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nanjing Keerda Mould Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Pultrusion dies for FRP window and door profiles should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Nanjing Keerda Mould Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Nanjing Keerda Mould Co., Ltd. publishes FRP pultrusion-die design and manufacture as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Precision machining for special, open and closed profile sections depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Die-frame and supporting-tool manufacture is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Mirror polishing and hard-chrome surface treatment should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Nanjing Keerda Mould Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nanjing Keerda Mould Co., Ltd.'s published scope creates a potential fit for window, door or building-envelope programs. Buyers should confirm the exact profile series, section drawing, glazing and hardware configuration, whole-assembly thermal basis, air and water performance, finish, fire claim and the certificate or report that represents the offered system.
Nanjing Keerda Mould Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Nanjing Keerda Mould Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Nanjing Keerda Mould Co., Ltd.'s source record currently includes Nanjing Keerda Official English Website, Keerda Company Profile, FRP Pultrusion Mould Directory, FRP Special-Profile Mould Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 1 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-09. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Zhejiang Dasheng Mould Plastics Co., Ltd. is a mainland-China tooling company in Huangyan, Taizhou, Zhejiang. Its current Chinese and English websites say the business has supported automotive and industrial customers since 2001 with thermoplastic, thermoset and advanced-composite tooling, including development capability for SMC, BMC, GMT, LFT-D and RTM processes. China Composites Expo lists the exhibitor as DASHENG MOULD and describes a Taizhou headquarters, medium-to-large automotive and structural molds, thermoset and thermoplastic tooling, and business across Europe, the Americas and Asia. The exhibitor wording, current Chinese and English legal names, No. 333 Jinchuan Road address, telephone, info@dsmould.com email, dsmould.com domain and unified social-credit code printed on company-hosted certificate images are deduplicated to this one mainland entity. Published Changxing and Xuzhou bases and the Shanghai sales branch are treated as operating locations rather than duplicate suppliers. Mexico, Dubai and Italy service points are not presented as the legal subject of this China profile, and unrelated similarly named mold companies are excluded.
Yuyao Fanghua Mould's official website traces its predecessor, Yuyao Fanghua Printing Machine Factory, to 1998 and describes the current business as a specialist manufacturer of FRP pultrusion molds in Yuyao, Zhejiang. Its published range covers conventional and complex profile dies, preformers and die frames, cavity machining, together with compression, extrusion and injection molds and small-part machining. The company also lists gantry machining centers, CNC gantry grinders, precision machine tools, grinders and milling machines, and states that its molds are sold in China and overseas.
Official product catalogs, web directories and technical guides published by the supplier.
Official English overview of the company, products, services, news and contact details.
Open catalogOfficial company history and overview of pultrusion-die and surface-treatment capabilities.
Open catalogOfficial examples of pultrusion tooling for I-beams, H-sections, channels, large panels and die frames.
Open catalogOfficial examples of round, rectangular, right-angle and other special-profile dies.
Open catalogOfficial page publishing a business-license image; independently verify current registration details.
Open catalogOfficial Nanjing address, telephone, fax and contact-person details.
Open catalog