Nanjing Tianming Composite Materials is a source-reviewed supplier profile for chopped strand mat, pultruded, and fiberglass mat, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Nanjing Tianming Composite Materials Co., Ltd. says on its current official website that it began in 2001 and manufactures fiberglass mats. The published product center covers chopped-strand, continuous-filament, composite, needle-punched and surface mats, together with roving, chopped glass and a TML thermoplastic composite sheet. It explicitly identifies mat constructions for vacuum infusion, pultrusion and compression molding. The China Composites Expo N directory supports the Tianming exhibitor identity and its chopped, continuous, needle and composite mat range. GetFRP assigns chopped strand mat, fiberglass mat and related fiberglass-product demand only to those actual catalog products. The site also says Tianming acts as an agent for some roving and other fiberglass products, so buyers must confirm the legal manufacturer and plant for each offered grade rather than assuming every catalog item is made on Tianming's mat lines.
The reviewed product and process scope makes this supplier relevant to buyer searches for chopped strand mat, pultruded, fiberglass mat, and fiberglass chopped strand mat. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Nanjing Tianming Composite Materials Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nanjing Tianming Composite Materials Fiberglass chopped-strand mat.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nanjing Tianming Composite Materials Co., Ltd. currently lists 12 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A Tianming mat RFQ should identify chopped-strand, continuous-filament, needle-punched, surface or composite construction and define glass composition, filament diameter and chopped length where relevant, sizing or binder chemistry, powder or emulsion form, nominal areal weight and tolerance, width and edge condition, roll length and diameter, core, permitted joints, moisture and combustible content. State wet-out rate, tensile strength by direction, stiffness and handling, resin compatibility, target laminate surface and any permeability or flow requirement. For vacuum infusion, provide the full reinforcement stack, resin viscosity and temperature, flow distance, vacuum level, infusion time, cure and surface expectations; a product marketed for infusion is not itself a finished vacuum-infused component. Pultrusion and compression-molding programs should define the profile or panel, preforming and feed behavior, resin or thermoplastic matrix, temperature and pressure, line speed or cycle, surface veil and print-through, scrap and splicing limits. Automotive-interior, wind-energy, electrical or TML sheet programs may require VOC and odor, fogging, flammability, dielectric, impact, heat, humidity, aging, dimensional and acoustic testing against named methods. Request the exact grade TDS, controlled sales specification, guaranteed and typical values, test methods, current test reports matching the grade, certificate-of-analysis example, lot definition, retain samples, change notification, packaging, storage and shelf life. Use representative resin and production tooling for qualification and confirm wet-out, voids, surface, mechanical properties and process stability before scale-up. The official site states that some roving and other fiberglass products may be agency items; every quotation should name the legal manufacturer, plant and country of origin and identify who owns quality, change and complaint responsibility. Tianming publishes ISO and IATF history, but GetFRP leaves certification arrays empty until current certificates are matched to the contracting entity, production site, product scope, number and validity.
No company-level certification is listed on this profile.
Evaluate Nanjing Tianming Composite Materials Co., Ltd. as a potential composite product manufacturer for chopped strand mat, verify the public evidence and prepare a comparable RFQ.
Nanjing Tianming Composite Materials Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Fiberglass continuous-filament mat, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nanjing Tianming Composite Materials Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nanjing Tianming Composite Materials Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Nanjing Tianming Composite Materials Co., Ltd. publishes Fiberglass chopped-strand-mat production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Fiberglass continuous-filament-mat production depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Needle mat and surface veil manufacture is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Multi-material composite-mat production should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Nanjing Tianming Composite Materials Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nanjing Tianming Composite Materials Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Nanjing Tianming Composite Materials Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Nanjing Tianming Composite Materials Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Nanjing Tianming Composite Materials Co., Ltd.'s source record currently includes Official Tianming Website, About Tianming, Tianming Product Center, Fiberglass Chopped-Strand Mat. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, product and solution entry.
Open catalogOfficial entity, history and manufacturing scope.
Open catalogOfficial chopped, continuous, composite, needle and surface mat directory.
Open catalogOfficial chopped-strand-mat entry.
Open catalogOfficial pultrusion-mat and process entry.
Open catalogOfficial Nanjing contact entry.
Open catalogOrganizer source for exhibitor identity and mat scope.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.