Nantong Fuyuan Carbon Fiber Recycling is a source-reviewed supplier profile for carbon fiber products and chopped carbon fiber, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. (FUY) publishes a focused offer for resource recovery from carbon-fiber composite waste. Its official company page identifies cured and uncured prepreg waste, discarded composite parts and production offcuts as accepted streams, while current product pages list mechanically chopped 3–12 mm recycled carbon fiber, pure recycled-carbon-fiber nonwoven mat and hybrid precursor mats made with PP, PA or PPS thermoplastic fibers. The official history records FUY's registration on 7 April 2017, and the China Composites Expo N directory independently lists the Nantong exhibitor. GetFRP maps only the actual recovered-fiber, chopped-fiber, nonwoven-mat and recycling-service offer. Application examples such as reinforced plastics, conductive products, cement, refractory products or hot-pressed thermoplastic parts are qualification targets, not evidence that FUY manufactures every downstream finished product.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber products and chopped carbon fiber. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Nantong Fuyuan Carbon Fiber Recycling Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nantong Fuyuan Carbon Fiber Recycling 3–12 mm chopped recycled carbon fiber.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A waste-recycling inquiry should identify the legal owner and generator, source process, carbon-fiber grade if known, resin or thermoplastic matrix, cured or uncured state, form and dimensions, total mass, packaging, storage history, contaminants, inserts, metals, coatings, release films, solvents and any hazardous classification. Define whether material is prepreg trim, expired prepreg, dry fiber, laminate, molded component or machining offcut; provide representative photographs, SDS and composition evidence; and agree sampling, acceptance, rejection, transport, weighing, chain of custody, data protection, destruction evidence and regulatory responsibility. A recycled-fiber purchase needs a different specification. For chopped recycled carbon fiber, define nominal and allowable length distribution, fiber diameter, carbon content, residual resin or sizing, moisture, bulk density, agglomeration, foreign matter, metal contamination, electrical or mechanical targets, packaging, lot size and CoA tests. For pure recycled-carbon-fiber mat, specify areal weight within the published 150–1000 g/m² range, thickness, width, roll length, fiber distribution and orientation, binder if any, joins, defects and roll packing. For the PP, PA or PPS hybrid mats, state the thermoplastic fiber, carbon-fiber fraction, blend uniformity, target laminate thickness and fiber volume, drying, heating and consolidation window, tooling, pressure, cooling and acceptance coupon plan. FUY's application examples do not prove fitness for a customer's polymer, conductive, refractory, cement or thermal system; require controlled compounding or hot-press trials and test the actual production lot. The official website publishes a 1,500 t/year treatment-line statement, awards and carbon-footprint news, but GetFRP does not place these in verified certification or guaranteed-capacity fields without current documents matched to the legal entity, site, product, method, number and validity. Buyers should confirm the contracting, receiving, processing, invoicing and payment entity, transport licenses where applicable, waste-status transfer, recovered-product status, export classification and allocation of liability for rejected or hazardous loads.
No company-level certification is listed on this profile.
Evaluate Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. as a potential composite product manufacturer for carbon fiber products, verify the public evidence and prepare a comparable RFQ.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Pure recycled-carbon-fiber nonwoven mat, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. publishes Carbon-composite waste intake and classification as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Cured and uncured prepreg-waste resource recovery depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Composite-part and offcut recycling is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Recycled-carbon-fiber separation and quality control should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Nantong Fuyuan Carbon Fiber Recycling Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd.: The published product scope can support an initial discussion for engineered composite components. Buyers should identify the governing drawing, laminate or material definition, load and environment, dimensional tolerance, finish and inspection method before treating a catalog item as a production match.
Nantong Fuyuan Carbon Fiber Recycling Co., Ltd.'s source record currently includes FUY Company Profile, FUY History, Chopped Recycled Carbon Fiber, Recycled Carbon-Fiber Mats. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official entity, recycling scope and product overview.
Open catalogOfficial 2017 registration and development record.
Open catalogOfficial 3–12 mm chopped-fiber product page.
Open catalogOfficial pure and thermoplastic-hybrid mat page.
Open catalogOfficial Nantong address, phones and email.
Open catalogOrganizer source for the Nantong Fuyuan exhibitor.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.