Nan Ya Electronic Materials (Kunshan) is a source-reviewed supplier profile for fiberglass cloth, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Nan Ya's current mainland website identifies Nan Ya Electronic Materials (Kunshan) Co., Ltd. as a Kunshan facility established in August 2000 with four principal product groups: copper-clad laminate, epoxy resin, glass fabric and copper foil. Its official product pages publish general electronic glass fabrics including 7628, 2116 and 1080; ultra-thin 1000, 1017, 1027 and related styles; low-dielectric glass fabrics; EL127 liquid bisphenol-A epoxy resin; and several rigid and composite CCL families. The second page of the China Composites Expo N directory independently lists the same exhibitor. The reviewed mainland facility page separately identifies Bisheng Fiberglass (Kunshan) as another legal entity for electronic glass yarn and chopped strands. GetFRP therefore does not attribute raw glass yarn or chopped-strand production to Nan Ya Electronic Materials (Kunshan), even where the wider group describes vertical integration.
The reviewed product and process scope makes this supplier relevant to buyer searches for fiberglass cloth. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Nan Ya Electronic Materials (Kunshan) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nan Ya Electronic Materials (Kunshan) 7628.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nan Ya Electronic Materials (Kunshan) Co., Ltd. currently lists 12 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
For electronic glass fabric, specify the exact style and controlled revision rather than asking for generic fiberglass cloth. Define yarn nomenclature in warp and fill, count per inch, nominal and tolerance for areal weight and thickness, width, roll length, selvage, finish or sizing, open-weave requirement, filament spreading, hollow or metal-fiber defect controls, joints, visual-defect map, packaging and storage. For ultra-thin or low-dielectric styles, add target Dk and Df at the stated frequency and method, moisture conditioning, thickness distribution, dimensional stability, thermal expansion, tensile behavior, resin wet-out, CAF-related qualification and laminate or PCB process conditions. Qualification should use the actual intended resin, treatment, lamination cycle, copper construction and board design. For EL127 liquid bisphenol-A epoxy resin, define epoxy equivalent, viscosity and test temperature, color, moisture, hydrolyzable chlorine and ionic impurities where relevant, storage and shelf life, packaging, hardener and accelerator, mix ratio, cure and post-cure, Tg, electrical, mechanical, adhesion, chemical and process requirements. CCL and copper foil require separate controlled specifications for construction, resin system, glass styles, copper thickness and treatment, Tg, CTE, thermal reliability, peel strength, dielectric behavior, drilling and PCB acceptance; a glass-fabric style is not interchangeable with a finished CCL grade. Request current TDS/SDS, product and site declaration, CoA example, lot definition, traceability, change notification and retained-sample policy. The facility page mentions management-system certifications, but GetFRP leaves certification arrays empty until current documents are matched to Nan Ya Electronic Materials (Kunshan), the Changjiang South Road site, product scope and validity. The same official mainland website lists Bisheng Fiberglass (Kunshan) separately for glass yarn and chopped strands. Buyers must not use wider group vertical-integration language to assume that these raw-fiber products are manufactured or sold by the Nan Ya Electronic Materials legal entity without written confirmation of manufacturer, seller, invoice, origin and quality responsibility.
No company-level certification is listed on this profile.
Evaluate Nan Ya Electronic Materials (Kunshan) Co., Ltd. as a potential composite product manufacturer for fiberglass cloth, verify the public evidence and prepare a comparable RFQ.
Nan Ya Electronic Materials (Kunshan) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For 106, 1035, 1067 and 1078 lightweight electronic glass fabrics, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nan Ya Electronic Materials (Kunshan) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nan Ya Electronic Materials (Kunshan) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Nan Ya Electronic Materials (Kunshan) Co., Ltd. publishes Electronic glass-fabric production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Warp/fill count, areal-weight and thickness control depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Open-weave and low-void glass-fabric configuration is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nan Ya Electronic Materials (Kunshan) Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Nan Ya Electronic Materials (Kunshan) Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Nan Ya Electronic Materials (Kunshan) Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Nan Ya Electronic Materials (Kunshan) Co., Ltd.'s source record currently includes Nan Ya Electronic Materials Kunshan Facility, Mainland Product Index, Electronic Glass Fabrics, Liquid Bisphenol-A Epoxy Resin. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official entity, establishment date, four product groups and contacts.
Open catalogOfficial mainland CCL, foil, epoxy and glass-fabric index.
Open catalogOfficial general, ultra-thin and low-dielectric styles and specifications.
Open catalogOfficial EL127 product and application page.
Open catalogOfficial NP, FR-4 and CEM-3 product entry.
Open catalogOrganizer source for the Nan Ya Electronic Materials Kunshan exhibitor.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.