Newtech is presented as a source-reviewed supplier profile centered on PAN precursor, with company-published capability separated from buyer-side verification requirements.
Newtech Group Co., Ltd. is a Changzhou, Jiangsu-based industrial group that positions itself as a provider of industrialized carbon-fiber and composite application solutions for global markets. Its official portfolio spans carbon-fiber raw materials, fabrics and prepregs, pultruded and other composite products, intelligent equipment, and testing. A company-published carbon-fiber brochure states that the business unit's first carbonization line entered operation in 2021, lists 12K, 24K, 25K and 50K products, and reports total annual capacity of 18,000 tonnes. GetFRP has not independently verified that capacity or the published performance data.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for materials engineers and converters evaluating reinforcement form, sizing compatibility, package quality and downstream process stability. It organizes Newtech Group Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Newtech PAN precursor.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Newtech Group Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Newtech's official site and product literature present a vertical portfolio extending from PAN precursor, carbon fiber, fabric and prepreg to pultruded profiles, composite parts, recycled chopped fiber, production equipment and testing. The prepreg brochure lists representative UD150, UD200, UD300, PN300, LT400 and TW200 products with medium- or low-temperature cure, flame-retardant, fast-cure and high-temperature thermoset epoxy options. The pultrusion division publishes carbon-, glass- and hybrid-fiber products. The group site also describes its WMC testing affiliate as operating to ISO/IEC 17025 and holding CNAS and DNV GL credentials; buyers should validate the current certificates, accreditation scope and relationship to the supplying legal entity. Before approval, confirm the exact business unit and manufacturer, TDS/SDS, fiber grade and tow size, sizing and resin system, test method and batch COA, dimensional tolerances, MOQ, lead time, packaging, export authorization and end-use restrictions.
No company-level certification is listed on this profile.
Evaluate Newtech Group Co., Ltd. as a potential composite reinforcement supplier for PAN precursor, verify the public evidence and prepare a comparable RFQ.
Newtech Group Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For 12K, 24K, 25K and 50K carbon fiber, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Newtech Group Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Newtech Group Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Carbon-, glass- and hybrid-fiber pultruded products should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Newtech Group Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Newtech Group Co., Ltd. publishes PAN precursor production and carbonization as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Multiaxial warp knitting and fabric manufacture depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Prepreg manufacture is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Carbon-, glass- and hybrid-fiber pultrusion should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Newtech Group Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Newtech Group Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Newtech Group Co., Ltd.'s listed machinery can enter a line comparison when the buyer supplies a written product and process requirement. The proposal should define the complete line boundary, controls, utilities, safety, throughput, acceptance test, installation, training, spares, documentation and the responsibility for proving product quality with representative material.
Newtech Group Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Newtech Group Co., Ltd.'s source record currently includes Newtech Carbon Fiber and Company Profile, Carbon Fiber Prepreg Brochure, Newtech Product Center, Pultrusion Division Overview. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-12. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Changzhou Tianma Group Co., Ltd. is based in Xinbei District, Changzhou, Jiangsu. Both the official website and China Composites Expo identify this legal entity, while the website also notes its former identity as Building Materials Factory 253. The site traces the enterprise lineage to a state-planned project begun in 1960 and calls the business the cradle of China's FRP industry; 1960 is therefore presented here as the start of the organizational lineage, not the current legal entity's registration date. The published portfolio spans glass-fiber yarns and products, unsaturated polyester and vinyl ester resins, gelcoats and auxiliaries, SMC/BMC, finished FRP products, and wind-energy and photovoltaic composites. China Composites Expo lists the exhibitor as CHANGZHOU TIANMA GROUP CO., LTD. and publishes booth 7M06 for 2026. History, industry-position, scale, capacity, market and product-performance statements are company- or organizer-published and have not been independently verified by GetFRP.
China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.
Zhongfu Shenying Carbon Fiber Co., Ltd. was established in 2006 and is part of China National Building Material Group. The company develops, manufactures and sells carbon fiber and carbon-fiber composite materials, and was listed on the Shanghai Stock Exchange in 2022 under stock code 688295.
Official product catalogs, web directories and technical guides published by the supplier.
Official brochure covering the group supply chain, 12K through 50K carbon fiber, published capacity and recycled chopped fiber.
Open catalogOfficial representative grades, areal weights, resin contents and widths for unidirectional, twill and multiaxial prepreg.
Open catalogOfficial directory for PAN precursor, carbon fiber, recycled fiber, prepreg, equipment, composite parts and engineering.
Open catalogOfficial overview of carbon-, glass- and hybrid-fiber pultruded products and applications.
Open catalogOfficial group structure, composite value-chain and Changzhou carbon-fiber base overview.
Open catalog