Ningbo Licheng Composite Products is a source-reviewed supplier profile for carbon fiber tube, carbon fiber plate, and carbon fiber panels, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Ningbo Licheng Composite Products Co., Ltd., identified on its official logo as Ningbo SUPER RESIN, publishes a broad custom carbon-composite offer. Its current and legacy official directories support wafer-handling discs, forks and robot arms; carbon rollers and tubes; carbon plates; carbon-and-aramid or carbon-and-aluminum honeycomb panels; medical X-ray panels; aircraft and drone components; automotive exterior parts; motorcycle exhaust components; prosthetic accessories; trunk shells; loom components; and custom carbon-fiber golf clubs or shafts. The official company page records establishment in 2011, and China Composites Expo independently lists the Ningbo exhibitor in its N directory. GetFRP maps only products shown in the company's current or official legacy catalog. Aerospace, automotive, medical and sports labels are not expanded into unrelated finished products that the website does not identify.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber tube, carbon fiber plate, carbon fiber panels, and carbon fiber products. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Ningbo Licheng Composite Products Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Ningbo Licheng Composite Products Carbon-fiber discs for semiconductor wafer handling.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Ningbo Licheng Composite Products Co., Ltd. currently lists 14 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Custom carbon components should be quoted against controlled drawings and verifiable operating conditions. Provide the permitted material or grade, layup schedule and fiber directions, resin content and cure, honeycomb material, density and cell size, film adhesive and panel construction, dimensions and tolerance, flatness, holes, inserts, bonded or fastened interfaces, finish and cosmetic zones, mass, stiffness, strength, fatigue, impact, temperature and life requirements. Semiconductor wafer-handling discs, forks and robot arms also need cleanliness, particle and ionic contamination, outgassing, surface resistance or grounding, warpage, dynamic deflection, positional repeatability, equipment interfaces and clean packing. Medical X-ray panels require transmission or attenuation, uniformity, artifact, areal mass, flatness, edge closure and applicable regulatory evidence; an official product photograph is not medical-device approval. Carbon rollers and tubes need inner and outer dimensions, length, wall, straightness, roundness, balance, inertia, critical speed, end fittings and bond acceptance. Carbon plates and honeycomb panels need layup, direction, core, bondline, skin thickness, flatness, edges and inserts. Automotive, aircraft, drone, motorcycle, prosthetic and golf products have different load, regulatory and cosmetic regimes and must be qualified individually. A process RFQ should confirm the actual Ningbo supply boundary for prepreg layup, autoclave, hot pressing, roll wrapping, sandwich assembly, CNC, bonding and coating, together with tooling ownership, maximum size, production volume and acceptance. A first article needs material-lot identity, layup and cure records, dimensional and visual results, NDT or coupons, bonding records, mass and performance evidence. Series supply needs a control plan, key characteristics, fixture calibration, retention samples, change notice and traceability. The official website refers to ISO 9001 and ISO 13485, but GetFRP does not record either as verified until a current certificate matches the Ningbo legal entity, address, scope, number and validity. Buyers should also confirm the contracting, invoicing, payee and export entity, tooling and IP, confidentiality, packing and protection, MOQ, lead time, Incoterm, warranty and support.
No company-level certification is listed on this profile.
Evaluate Ningbo Licheng Composite Products Co., Ltd. as a potential composite product manufacturer for carbon fiber tube, verify the public evidence and prepare a comparable RFQ.
Ningbo Licheng Composite Products Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Carbon-fiber forks and robot arms for wafer handling, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Ningbo Licheng Composite Products Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Ningbo Licheng Composite Products Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Ningbo Licheng Composite Products Co., Ltd. publishes Carbon-fiber prepreg cutting and layup as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Autoclave molding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Hot-press compression molding is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Ningbo Licheng Composite Products Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Ningbo Licheng Composite Products Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Ningbo Licheng Composite Products Co., Ltd.'s chemistry portfolio can be evaluated for the named composite process only after the processing window and cured-property basis are aligned. Request current data sheets, grade and site identity, viscosity or mix control, cure and exotherm, storage, batch certificate fields and test evidence based on the intended reinforcement and construction.
Ningbo Licheng Composite Products Co., Ltd.'s source record currently includes Ningbo Super Resin Website, Company Profile, Manufacturing Capability, Official Product Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company, capability and contact entry point.
Open catalogOfficial 2011 establishment and business overview.
Open catalogOfficial process, equipment and quality capability page.
Open catalogOfficial carbon-component and panel directory.
Open catalogOfficial carbon-and-aluminum or aramid honeycomb panel page.
Open catalogOfficial Ningbo address, phone and email.
Open catalogOrganizer source for the Ningbo Licheng exhibitor.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.