Nippon Paint (China) is presented as a source-reviewed supplier profile centered on Fiber Paint carbon-fiber composite coating solution, with company-published capability separated from buyer-side verification requirements.
Nippon Paint (China) Co., Ltd. publishes a Fiber Paint composite-coating matrix covering carbon-fiber composites, glass-fiber composites and functional coatings. Its carbon-composite page identifies surface roughness, low surface energy, adhesion, fiber print-through, weave depressions and Class-A appearance as coating challenges, while the current exhibition article places the series in transportation, aerospace, industrial and sporting-goods applications. The glass-composite series is described for photovoltaic modules, wind and energy-efficient windows, with a separate Fiber Paint photovoltaic-composite-frame solution. Functional families include low-temperature fast cure, high weatherability, high hardness and additives. China Composites Expo's L directory lists the Nippon Paint China exhibitor. Carbon and glass fibers are substrates being coated, not reinforcement products supplied by Nippon Paint; the profile does not classify the company as a fiber, fabric or composite-part manufacturer. Performance, VOC, award and project statements remain supplier-published and require grade-, process-, film-build-, substrate- and specification-matched validation.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Nippon Paint (China) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Nippon Paint (China) Fiber Paint carbon-fiber composite coating solution.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Nippon Paint (China) Co., Ltd. currently lists 10 product or service groups and 10 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
A composite-coating RFQ should identify carbon- or glass-fiber construction, matrix resin, molding process, peel ply or release agent, post-cure, surface roughness, exposed fiber, porosity, contamination and current pretreatment. Define the target color, gloss, visual effect and appearance class; allowable fiber print-through, pinholes, weave depressions and orange peel; required primer, surfacer, color and clear functions; dry-film build and mass; masking and bond areas; touch-up and repair expectation. State the available cleaning, sanding, plasma or other pretreatment, spray or application equipment, flash and oven zones, part temperature, maximum cure temperature, takt, batch size and VOC or environmental restrictions. Outdoor, photovoltaic, transport, sporting-goods, aerospace and industrial applications need service-specific exposure: UV and weathering, heat and humidity, salt spray, windblown sand, water immersion, cleaning chemicals, fuels or oils, stone chip, scratch, abrasion, impact, thermal cycling and substrate flex. Specify the requested test method, specimen and acceptance value rather than relying on labels such as high weatherability or high hardness. For photovoltaic composite frames, include frame resin and reinforcement, geometry, cut ends and joints, inland, desert or marine site, expected design life, module assembly and electrical-isolation constraints. For a Class-A carbon-composite surface, agree reference panels, viewing conditions, color tolerance, gloss range, wave-scan or other appearance metrics and the permitted rework rate. Ask Nippon Paint China for the exact system and grade names, TDS and SDS, mix ratio, induction and pot life, thinning, application window, wet and dry film, flash, cure and post-cure, sanding and intercoat limits, storage, shelf life, cleanup and repair procedure. Laboratory panels should use production substrate and release history. Line trials should confirm wetting, adhesion, solvent entrapment, print-through, color and gloss, cure, yield, overspray and takt before approval. Require test reports whose coating, substrate, pretreatment, film build, cure and laboratory match the proposed process; marketing statements about low VOC, fast cure, weathering, scratch or stone-chip performance are not transferable without that match. Clarify whether quotation scope includes paint, additives, process engineering, line audit, color matching, trial panels, on-site launch, defect analysis and ongoing technical service. Carbon and glass reinforcement remain customer substrates, so GetFRP excludes raw-fiber and composite-part supplier phrases from this coating profile.
No company-level certification is listed on this profile.
Evaluate Nippon Paint (China) Co., Ltd. as a potential composite product manufacturer for Fiber Paint carbon-fiber composite coating solution, verify the public evidence and prepare a comparable RFQ.
Nippon Paint (China) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Industrial carbon-composite coating series, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Nippon Paint (China) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Nippon Paint (China) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Nippon Paint (China) Co., Ltd. publishes Carbon-composite surface-condition assessment as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Glass-composite surface and exposed-fiber assessment depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Wetting and adhesion design for low-surface-energy substrates is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Nippon Paint (China) Co., Ltd.'s published scope creates a potential fit for window, door or building-envelope programs. Buyers should confirm the exact profile series, section drawing, glazing and hardware configuration, whole-assembly thermal basis, air and water performance, finish, fire claim and the certificate or report that represents the offered system.
Nippon Paint (China) Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Nippon Paint (China) Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Nippon Paint (China) Co., Ltd.'s source record currently includes Official Nippon Paint China Website, Fiber Paint Carbon-Composite Coating Solution, Composite-Coating Product Matrix, Photovoltaic Composite-Frame Coating. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official China business and contact entry.
Open catalogOfficial carbon-composite surface challenges and coating solution.
Open catalogOfficial carbon, glass and functional coating series.
Open catalogOfficial Fiber Paint photovoltaic composite-frame solution.
Open catalogOfficial business contact and national service line.
Open catalogOrganizer source for the Nippon Paint China exhibitor.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.