Pulwell Composites is a source-reviewed supplier profile for carbon fiber tube, fiberglass rebar, and pultruded, with every search topic tied to company-published product or process evidence and separated from buyer-side verification requirements.
Pulwell Composites Co., Ltd. states on its official website that it has manufactured fiber-reinforced composites since 2001. Headquartered in Zhongshan, Guangdong, with a published Hong Kong branch office, its range includes glass-, basalt- and carbon-fiber composite rebar; GFRP dowel and tie bars; pultruded structural profiles; fiberglass and carbon-fiber tubes and rods; CFRP strengthening strips; and composite posts and stakes for agricultural and other custom applications.
The reviewed product and process scope makes this supplier relevant to buyer searches for carbon fiber tube, fiberglass rebar, pultruded, and pultruded fiberglass. These phrases describe products or processes supported by the cited public scope; they do not expand the supplier's catalog or replace technical qualification.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Pulwell Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Pulwell Composites Composite Rebar.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Pulwell Composites Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Pulwell's official site states that its approximately 10,000 m² factory operates 14 pultrusion lines and three roll-wrapping lines, with more than 80% of output exported to Europe, North America and Australia. Published material options include glass, carbon, basalt and hybrid reinforcement with polyester, vinyl-ester, epoxy, phenolic or polyurethane resins. Finishing capabilities include pointing, tapering, centerless grinding, drilling, chamfering, painting, co-injection and assembly. The company also lists in-house testing for resin gel time and content, tensile, flexural, compression, shear and bond strength, dye penetration, Barcol hardness and density. These capacity, export, certification, standards and performance statements are company-published. Buyers should validate the drawing, material system, fiber content, dimensional tolerance, surface, mechanical data, test method and report, certificate, packaging, MOQ, lead time and traceability for the quoted grade and batch.
Evaluate Pulwell Composites Co., Ltd. as a potential composite product manufacturer for carbon fiber tube, verify the public evidence and prepare a comparable RFQ.
Pulwell Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For GFRP dowel bars, tie bars, mesh, bends and stirrups, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Pulwell Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Pulwell Composites Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Fiberglass and carbon-fiber tubes, rods and telescoping poles should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Pulwell Composites Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Pulwell Composites Co., Ltd. publishes Unidirectional continuous pultrusion as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Roll-wrapped composite processing depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Compression molding is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Profile geometry, material and process engineering support should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Pulwell Composites Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Pulwell Composites Co., Ltd.'s listed reinforcement products may be relevant to corrosion-sensitive concrete or civil works. Buyers should state fiber type, nominal area, guaranteed tensile property, modulus, bond surface, bend geometry, test method, design code, lot traceability and packaging. FRP reinforcement should not be specified or handled as if it were interchangeable with steel.
Pulwell Composites Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Pulwell Composites Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Pulwell Composites Co., Ltd.'s source record currently includes Pulwell Company Profile, Composite Rebar Product Directory, GFRP Dowel Bar Product Directory, FRP Structural Profile Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 2 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company history, manufacturing base, product scope, material options and quality controls.
Open catalogOfficial directory for glass-, basalt- and carbon-fiber rebar, mesh, bends and stirrups.
Open catalogOfficial directory for GFRP dowel bars used in concrete pavements, airports, tolling and industrial sites.
Open catalogOfficial directory for FRP structural profiles, custom pultrusions and polyurethane pultrusions.
Open catalogCompany-published overview of pultrusion, roll wrapping, compression molding, engineering and testing capabilities.
Open catalogOfficial Zhongshan address, company email, telephone and published general-manager contact.
Open catalog
According to its official website, F1 Composites is FengDu New Material's international export company. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, quality documentation, export coordination and international delivery support.
Jiangsu Aosheng Composite Materials Technology Co., Ltd. is a Suzhou-based carbon-composite company whose current corporate website and 2026 China Composites Expo listing support carbon-fiber woven and hybrid fabrics, prepreg, wind-blade pultruded plate and composite application development. The official site also presents automotive, sports, hydrogen, aviation and overseas footprints under the Aosheng group. GetFRP therefore assigns measured-demand phrases such as carbon fiber fabric, carbon fiber plate, pultruded, resin infusion and vacuum infusion only where a published product or manufacturing route supports them. Fishing rods may be an end use of prepreg, but they are not listed here as an Aosheng finished product. Likewise, automotive parts, sports products and hydrogen cylinders are marked as group-sector inquiries rather than automatically attributed to the Jiangsu parent factory. Buyers must confirm the exact legal entity, production site and specification behind a quotation. Awards, customer relationships, capacity, CNAS, patent and standards-participation statements on the website remain company claims, not GetFRP verification.
Nanjing Hitech Composites Co., Ltd. publishes an integrated HICOMA and Lica offer spanning pultruded carbon- and glass-fiber profiles, high-performance reinforcement fabrics and structural adhesives. Its current official catalog explicitly lists carbon-fiber plate, rod, tube, channel, rebar and prestressed plate systems; fiberglass beams, channels, angles, tubes, plates, rebar and grating; carbon- and glass-fiber fabrics; and bonding products for wind blades, carbon plate and civil structures. The China Composites Expo directory independently supports the Nanjing exhibitor identity and its pultruded-composite and epoxy-adhesive scope. GetFRP therefore assigns only demand phrases supported by those actual products, including carbon-fiber products, plates, rods, tubes and fabrics, pultruded fiberglass profiles and fiberglass grating. An application, system or performance label is not treated as a substitute for the offered grade, section drawing, laminate architecture, adhesive TDS or project engineering.