Shandong Haiyang Marine Mold is presented as a source-reviewed supplier profile centered on Yacht hull molds, with company-published capability separated from buyer-side verification requirements.
Marine composite mold builder. Hull molds up to 30 m. Supplies yacht and workboat builders globally with full hull / deck / interior tooling packages, including plug masters and shrink-controlled production tools.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for process engineers and manufacturers qualifying production tooling by drawing control, material, thermal design, tolerance and trial evidence. It organizes Shandong Haiyang Marine Mold Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Shandong Haiyang Marine Mold Yacht hull molds.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Shandong Haiyang Marine Mold Co., Ltd. currently lists 3 product or service groups and 2 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Marine composite mold builder. Hull molds up to 30 m. Supplies yacht and workboat builders globally with full hull / deck / interior tooling packages, including plug masters and shrink-controlled production tools.
Evaluate Shandong Haiyang Marine Mold Co., Ltd. as a potential composite tooling and die supplier for Yacht hull molds, verify the public evidence and prepare a comparable RFQ.
Shandong Haiyang Marine Mold Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Deck molds, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Shandong Haiyang Marine Mold Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Shandong Haiyang Marine Mold Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Shandong Haiyang Marine Mold Co., Ltd. publishes Marine molds as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Composite shell molds depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Shandong Haiyang Marine Mold Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Shandong Haiyang Marine Mold Co., Ltd.: The tooling scope may support a new composite product, but the buyer should release a controlled product drawing together with material, process, shrinkage, surface and throughput assumptions. Tool geometry alone cannot be approved without understanding how the proposed material and line will behave.
Shandong Haiyang Marine Mold Co., Ltd.: A replacement tool should be evaluated against the existing defect and maintenance history. Record wear, heat distribution, release, pulling force or cycle behavior, then define which improvement the new tool must demonstrate during the trial rather than treating a dimensional copy as the complete requirement.
Tooling quality is a combination of geometry, material, thermal behavior and process interaction. The sourcing file should contain the released drawing, tool material and treatment, inspection report and trial record. Critical datums need an agreed measuring method so the buyer and toolmaker do not approve different interpretations of the same nominal dimensions.
A useful trial reproduces the intended production material and operating window. Warm-up, steady-state run length, temperatures, force or pressure, cycle, sample positions and observed defects should be recorded. If the tool is adjusted, the final geometry and trial result must be linked to the revision that will be shipped and maintained.
Commercial terms should address design ownership, confidentiality, duplicate tools, maintenance, storage and end-of-life disposition. Spare heaters, sensors, inserts or wear components may be more important than a small tooling-price difference. Packing must protect precision surfaces and provide lifting and recommissioning instructions for the destination plant.
Shandong Haiyang Marine Mold Co., Ltd. does not yet have a complete official source set attached to this profile. The page can support discovery, but buyers should not rely on it for approval until the legal identity, official website and product evidence are documented.
The profile lists 2 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of not recorded. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
No eCatalog has been published yet.
Dezhou Hailida Molding Co., Ltd. presents itself on its official website as a developer, designer, manufacturer and service provider for SMC, BMC and LFT-D molds. The same site displays molded products for high-speed rail, automotive, rail signaling, power and telecom, bathrooms, charging equipment, utility tunnels and decorative panels. China Composites Expo lists the matching exhibitor as DEZHOU HAILIDA MOLDING CO., LTD. and extends the published mold scope to PCM, PDCPD and HP-RTM. The website and other public records use different operating-history descriptions, so this profile does not assign an establishment year before the legal-company timeline is reconciled. Equipment count, workforce, certification, customer and growth statements remain company- or organizer-published and do not represent a GetFRP factory audit, certificate verification or customer reference check.
Zhejiang Dasheng Mould Plastics Co., Ltd. is a mainland-China tooling company in Huangyan, Taizhou, Zhejiang. Its current Chinese and English websites say the business has supported automotive and industrial customers since 2001 with thermoplastic, thermoset and advanced-composite tooling, including development capability for SMC, BMC, GMT, LFT-D and RTM processes. China Composites Expo lists the exhibitor as DASHENG MOULD and describes a Taizhou headquarters, medium-to-large automotive and structural molds, thermoset and thermoplastic tooling, and business across Europe, the Americas and Asia. The exhibitor wording, current Chinese and English legal names, No. 333 Jinchuan Road address, telephone, info@dsmould.com email, dsmould.com domain and unified social-credit code printed on company-hosted certificate images are deduplicated to this one mainland entity. Published Changxing and Xuzhou bases and the Shanghai sales branch are treated as operating locations rather than duplicate suppliers. Mexico, Dubai and Italy service points are not presented as the legal subject of this China profile, and unrelated similarly named mold companies are excluded.
Yuyao Fanghua Mould's official website traces its predecessor, Yuyao Fanghua Printing Machine Factory, to 1998 and describes the current business as a specialist manufacturer of FRP pultrusion molds in Yuyao, Zhejiang. Its published range covers conventional and complex profile dies, preformers and die frames, cavity machining, together with compression, extrusion and injection molds and small-part machining. The company also lists gantry machining centers, CNC gantry grinders, precision machine tools, grinders and milling machines, and states that its molds are sold in China and overseas.