Shandong Runsing Composites is presented as a source-reviewed supplier profile centered on FRP Flat Sheets for Transport, with company-published capability separated from buyer-side verification requirements.
Runsing's official English website identifies the business as Shandong Runsing Composites Co., Ltd. and states that it was founded in 2010, with factories in Weifang, Shandong, and Ma'anshan, Anhui. Its published range covers FRP flat and embossed sheets, sandwich panels, CFRT sheets, sandwich cores, carbon-fiber panels, fire-resistant fiberglass sheets, HPL panels and fiberglass skylight panels for RV, refrigerated and logistics vehicles, building, industrial-equipment, marine, agricultural and sporting-goods applications.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Shandong Runsing Composites Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Shandong Runsing Composites FRP Flat Sheets for Transport.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Shandong Runsing Composites Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Runsing states that its two factories have more than 43,000 m² of plant space and over 300 workers, with combined annual output of approximately five million square meters across fiberglass, composite, decorative, PP-honeycomb and XPS panels. The company also publishes an export share of 70%–80% and says it has served more than 300 customers in over 20 countries. Its website offers project-specific selection of skins and cores plus customization of width, thickness, color, gloss, texture, fire performance and insulation. These capacity, export, certification and performance statements are company-published. Buyers should validate the offered construction, resin, facing and core, dimensional tolerance, flatness, adhesive system, fire or thermal reports, CE/ISO documents, MOQ, lead time, packaging and warranty for the quoted product.
Evaluate Shandong Runsing Composites Co., Ltd. as a potential composite product manufacturer for FRP flat sheets for RVs, refrigerated and dry-cargo trucks, buildings and industrial equipment, verify the public evidence and prepare a comparable RFQ.
Shandong Runsing Composites Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Embossed, non-slip and decorative FRP panels, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Shandong Runsing Composites Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Shandong Runsing Composites Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Continuous fiber-reinforced thermoplastic (CFRT) sheets should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Shandong Runsing Composites Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Shandong Runsing Composites Co., Ltd. publishes FRP sheet and laminate production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Foam-, honeycomb- and wood-core sandwich-panel bonding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, High-gloss, matte, embossed and non-slip surface customization is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Custom width, thickness, color and appearance should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Shandong Runsing Composites Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Shandong Runsing Composites Co., Ltd.'s listed transport sheets can be screened for refrigerated trucks, dry vans, RVs, buses or other vehicle bodies. The RFQ should state the skin and core construction, sheet or roll dimensions, surface class, color, UV exposure, adhesive and lamination route, thermal requirement, impact and peel evidence, fabrication details, annual volume and protective packing for cosmetic panels.
Shandong Runsing Composites Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Shandong Runsing Composites Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Shandong Runsing Composites Co., Ltd.'s source record currently includes Runsing Official English Website, Runsing Company Profile, Runsing Product Directory, FRP Flat Sheet Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 3 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Changzhou Rixin Molding Technology Co., Ltd. is based in Zhulin, Jintan District, Changzhou, Jiangsu. Its official website says the company was founded in 2009 and develops, manufactures and sells SMC/BMC compounds and compression-molded parts. It also designs SMC production lines and provides integrated SMC/BMC technical services. Published applications include automotive, building materials, sanitary products, rail, agriculture, marine equipment, electric power, water infrastructure and new energy. The China Composites Expo lists the company as CHANGZHOU RIXIN SMC/BMC CO., LTD., while the Rixin Group English site uses Changzhou Rixin Molding Technology Co., Ltd. This is a standalone legal-company profile, separate from GetFRP's Changzhou Rixin Group exhibitor profile. Capacity, equipment, qualification and customer-validation statements are company- or organizer-published and have not been independently verified by GetFRP.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of the company, product range, application solutions and export contacts.
Open catalogOfficial company history and published factory, capacity, R&D, market and service information.
Open catalogOfficial directory for FRP sheets, sandwich panels, CFRT, cores, carbon-fiber panels and related panel products.
Open catalogOfficial flat-sheet range for RVs, refrigerated and dry-cargo trucks and other applications.
Open catalogOfficial sandwich-panel range covering PP honeycomb, XPS, PET, EPS and PVC foam and wood cores.
Open catalogOfficial Shanghai office and Shandong factory addresses, telephone and contact channel.
Open catalog