Shanghai Horse Construction is presented as a source-reviewed supplier profile centered on Carbon Fiber Reinforcement Products, with company-published capability separated from buyer-side verification requirements.
Shanghai Horse Construction Co., Ltd. states that it has focused on structural-strengthening materials since 2006. Its published portfolio covers carbon-fiber fabric, CFRP plates and prestressed plate systems, carbon-fiber anchors, rods and mesh, FRP pile jackets, plus epoxy systems for CFRP bonding, post-installed anchoring, steel bonding, crack repair and bridge work. The official English site provides product directories, technical data sheets, certificates, test reports, design software and an international distributor network.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Shanghai Horse Construction Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Shanghai Horse Construction Carbon Fiber Reinforcement Products.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Shanghai Horse Construction Co., Ltd. currently lists 6 product or service groups and 7 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Horse's English site organizes its offer into six systems: FRP composite strengthening, prestressed CFRP plates, anchoring, steel bonding, crack repair and bridge-bearing work, with more than 30 published materials. The company profile states that its Shanghai production base exceeds 5,000 m², uses five automated production lines, has annual carbon-fiber-material output of about four million square meters and is supported by four main warehouses in China; these scale figures are company-published. Its resource library includes catalogs, TDS files and test reports for carbon-fiber fabrics, laminates, adhesives, anchors and bridge products. The CFRP Easy Design page cites ACI 318M-14 and ACI 440.2R-17 as calculation references. Buyers should validate the exact grade's fiber type and areal weight, tensile properties, resin chemistry and application temperature, adhesive mix ratio and cure window, substrate preparation, packaging, shelf life, MOQ and lead time, plus current ISO/CE documentation and third-party test evidence.
Evaluate Shanghai Horse Construction Co., Ltd. as a potential composite product manufacturer for Unidirectional carbon-fiber fabrics and wraps, verify the public evidence and prepare a comparable RFQ.
Shanghai Horse Construction Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For CFRP laminates, plates, strips and prestressed CFRP systems, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Shanghai Horse Construction Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Shanghai Horse Construction Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for FRP pile jackets should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Shanghai Horse Construction Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Shanghai Horse Construction Co., Ltd. publishes Automated carbon-fiber-material production (company-published) as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of FRP strengthening-system selection and application support depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Prestressed CFRP plate and anchorage-system supply is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Structural-adhesive system and installation-document support should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Shanghai Horse Construction Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Shanghai Horse Construction Co., Ltd.'s listed reinforcement products may be relevant to corrosion-sensitive concrete or civil works. Buyers should state fiber type, nominal area, guaranteed tensile property, modulus, bond surface, bend geometry, test method, design code, lot traceability and packaging. FRP reinforcement should not be specified or handled as if it were interchangeable with steel.
Shanghai Horse Construction Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Shanghai Horse Construction Co., Ltd.'s listed sheets or panels may suit transport, building or industrial surfaces depending on construction. Qualification should identify the manufacturing process, resin, reinforcement orientation, core where applicable, thickness and flatness tolerance, surface and color standard, UV or fire evidence, fabrication details and packing that protects edges and finish.
Shanghai Horse Construction Co., Ltd.'s source record currently includes Horse Construction Official Website, Horse Construction Company Profile, Structural Strengthening Product Directory, Horse Product Catalog Library. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 2 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Changzhou Rixin Molding Technology Co., Ltd. is based in Zhulin, Jintan District, Changzhou, Jiangsu. Its official website says the company was founded in 2009 and develops, manufactures and sells SMC/BMC compounds and compression-molded parts. It also designs SMC production lines and provides integrated SMC/BMC technical services. Published applications include automotive, building materials, sanitary products, rail, agriculture, marine equipment, electric power, water infrastructure and new energy. The China Composites Expo lists the company as CHANGZHOU RIXIN SMC/BMC CO., LTD., while the Rixin Group English site uses Changzhou Rixin Molding Technology Co., Ltd. This is a standalone legal-company profile, separate from GetFRP's Changzhou Rixin Group exhibitor profile. Capacity, equipment, qualification and customer-validation statements are company- or organizer-published and have not been independently verified by GetFRP.
Official product catalogs, web directories and technical guides published by the supplier.
Official international overview of the company, strengthening systems, projects, resources and export contacts.
Open catalogOfficial company history and company-published production-base and capacity information.
Open catalogOfficial directory for six strengthening systems and more than 30 published materials.
Open catalogOfficial catalog downloads for carbon-fiber fabrics, laminates, adhesives, mesh, rods and FRP jackets.
Open catalogOfficial TDS library for carbon-fiber fabrics, laminates, anchors and structural adhesives.
Open catalogCompany-published ISO 9001 and CE certificate downloads; verify current validity and scope before purchase.
Open catalogCompany-published test-report library for carbon-fiber fabrics, laminates and structural adhesives.
Open catalogOfficial CFRP calculation-tool overview for beam, slab and column strengthening, including published code references.
Open catalogOfficial Shanghai address, international email, WhatsApp and sales-contact details.
Open catalog