Shanghai Zhongke Composite NDT Equipment is presented as a source-reviewed supplier profile centered on Phased array ultrasonics, with company-published capability separated from buyer-side verification requirements.
End-to-end NDT equipment for composites: phased array UT, air-coupled UT, IR thermography, and industrial CT. Customers include aero engine nacelle suppliers, wind blade manufacturers, and automotive composite programs.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for quality and production teams assessing tooling, test equipment, calibration, software and service support. It organizes Shanghai Zhongke Composite NDT Equipment Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Shanghai Zhongke Composite NDT Equipment Phased array ultrasonics.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Shanghai Zhongke Composite NDT Equipment Co., Ltd. currently lists 4 product or service groups and 2 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
End-to-end NDT equipment for composites: phased array UT, air-coupled UT, IR thermography, and industrial CT. Customers include aero engine nacelle suppliers, wind blade manufacturers, and automotive composite programs.
Evaluate Shanghai Zhongke Composite NDT Equipment Co., Ltd. as a potential composite tooling and inspection supplier for Phased array ultrasonics, verify the public evidence and prepare a comparable RFQ.
Shanghai Zhongke Composite NDT Equipment Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Air-coupled ultrasonics, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Shanghai Zhongke Composite NDT Equipment Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Shanghai Zhongke Composite NDT Equipment Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for X-ray CT should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Shanghai Zhongke Composite NDT Equipment Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Shanghai Zhongke Composite NDT Equipment Co., Ltd. publishes NDT equipment as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Composite non-destructive testing depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Shanghai Zhongke Composite NDT Equipment Co., Ltd.'s listed machinery can enter a line comparison when the buyer supplies a written product and process requirement. The proposal should define the complete line boundary, controls, utilities, safety, throughput, acceptance test, installation, training, spares, documentation and the responsibility for proving product quality with representative material.
Shanghai Zhongke Composite NDT Equipment Co., Ltd.'s product references indicate a possible fit for transport applications. Qualification should address part revision, material and process, appearance class, dimensional capability, inserts and secondary operations, validation plan, change control, annual volume, service-part obligations and packaging that prevents cosmetic or structural damage.
Shanghai Zhongke Composite NDT Equipment Co., Ltd.: The listed tooling or inspection capability can support composite production when its measurement range, fixture interface and environmental limits match the process. Buyers should define the characteristic being controlled and the decision rule before selecting equipment from a catalog description.
Measurement equipment should be selected from the quality decision it must support. Range and resolution alone do not establish fitness: fixtures, surface condition, anisotropy, operator technique and environmental effects can dominate composite measurements. An acceptance study should use representative parts and include results near the agreed specification limits.
Calibration records need a clear link to the instrument serial number, configuration and reference standard. Buyers should define verification frequency, intermediate checks and the action taken when equipment is found out of tolerance. Digital results should preserve raw data, method revision, operator and part traceability rather than only a pass or fail label.
Long-term use depends on training, software and consumables. Confirm licenses, update policy, export formats, probe or reference-block availability and support response. For critical inspection, document a backup route so a single unavailable instrument does not stop production or encourage unapproved inspection shortcuts.
Shanghai Zhongke Composite NDT Equipment Co., Ltd. does not yet have a complete official source set attached to this profile. The page can support discovery, but buyers should not rely on it for approval until the legal identity, official website and product evidence are documented.
The profile lists 2 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of not recorded. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
No eCatalog has been published yet.
DeepSea Precision Tech (Shenzhen) Co., Ltd. is the English identity used by, an industrial and medical imaging-equipment business in Shenzhen's Guangming District, Guangdong, mainland China. China Composites Expo's current Net Show lists the complete Chinese legal name and classifies the exhibitor under inspection equipment and instruments, R&D/design, testing, software development and other professional services. GetFRP publishes one Shenzhen legal entity: DeepSea,, the shenhaijingmi.com corporate site and the gongye.shenhaijingmi.com industrial site are not separate suppliers. The official history says the founding team began X-ray image-algorithm work in 2005, formed an R&D center in Guangzhou in 2014 and established the present Shenzhen company in December 2015. This page records 2015 as the company-published founding year; earlier team history and later technology milestones are not independently verified incorporation or performance evidence.