Xiamen LFT Composite Plastic is presented as a source-reviewed supplier profile centered on Long Fiber Thermoplastic Compounds, with company-published capability separated from buyer-side verification requirements.
Xiamen LFT Composite Plastic Co., Ltd. develops and manufactures long-fiber reinforced thermoplastic compounds under the LFT-G® brand. Its official company history identifies 2016 as the year Xiamen LFT was created, and the company describes an approximately 12,000 m² Xiamen facility covering offices, technical development, composite-pellet manufacturing and captive processing. The published range combines long glass or carbon fiber with thermoplastic matrices including PP, PA, PBT, TPU, PPS, PPA and PEEK for lightweight automotive and EV, appliance, industrial-equipment, aerospace and sporting-goods applications.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Xiamen LFT Composite Plastic Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Xiamen LFT Composite Plastic Long Fiber Thermoplastic Compounds.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Xiamen LFT Composite Plastic Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Xiamen LFT's official directory lists PP, PA6, PA66, PA12, PBT, TPU, PPS, PPA, PEEK, PEI, MXD6, ABS, PPO, PLA and HDPE matrices across long-glass- and long-carbon-fiber product families. Its technical-data center publishes selected standard-grade data sheets, while the company also states that it custom-formulates compounds and supports projects from concept, material selection and performance analysis through pellet production and introduction to injection molding, profile extrusion or compression molding. Published performance, capacity, customer, patent and certification statements are company-supplied. Buyers should validate the exact TDS/SDS, matrix and fiber type, fiber loading and retained length, flame-retardant or conductive grade, mechanical and thermal data, color, pellet length, compliance documents, packaging, MOQ, lead time and batch consistency for the quoted material.
Evaluate Xiamen LFT Composite Plastic Co., Ltd. as a potential composite product manufacturer for Long-glass- and long-carbon-fiber reinforced polypropylene compounds, verify the public evidence and prepare a comparable RFQ.
Xiamen LFT Composite Plastic Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Long-fiber reinforced PA6, PA66 and PA12 compounds, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Xiamen LFT Composite Plastic Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Xiamen LFT Composite Plastic Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Long-carbon-fiber reinforced PEEK, PEI and MXD6 compounds should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Xiamen LFT Composite Plastic Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Xiamen LFT Composite Plastic Co., Ltd. publishes Continuous long-glass- and long-carbon-fiber impregnation and pellet production as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Thermoplastic matrix and reinforcement formulation depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Material selection, performance analysis and metal-replacement support is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Application support for injection molding, profile extrusion and compression molding should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Xiamen LFT Composite Plastic Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Xiamen LFT Composite Plastic Co., Ltd.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Xiamen LFT Composite Plastic Co., Ltd.'s listed machinery can enter a line comparison when the buyer supplies a written product and process requirement. The proposal should define the complete line boundary, controls, utilities, safety, throughput, acceptance test, installation, training, spares, documentation and the responsibility for proving product quality with representative material.
Xiamen LFT Composite Plastic Co., Ltd.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Xiamen LFT Composite Plastic Co., Ltd.'s source record currently includes Xiamen LFT Official Website, Xiamen LFT Company Profile, LFT-G® Product Directory, LFT-G® Technical Data Sheet Centre. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 3 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-05. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
F1 Composite is the international composites brand of Chongqing Yaoyi New Material Technology Co., Ltd. It supplies pultruded FRP profiles, gratings, fiberglass window and door systems, and custom pultrusions for overseas projects, with English-language engineering, contracting, quality documentation, export paperwork and international delivery support.
Chongqing Dujiang Composites Co., Ltd. states that the current company name was adopted in 2002 and traces its fiberglass and FRP operating history to 1980. Its published catalog spans fiberglass reinforcements, thermoset resins, FRP profiles, carbon- and aramid-fiber materials, and related auxiliaries. The company reports 289 employees, approximately 50,000 m² of plant space, one-stop sourcing and OEM/ODM services. Its official sites publish a Yubei office address and a separate Beibei production address; buyers should verify the contracting entity, actual production site, product origin and quality-responsibility chain through the business license, factory audit and order-specific documents.
Official product catalogs, web directories and technical guides published by the supplier.
Official overview of LFT-G® material families, published advantages, applications and contact information.
Open catalogOfficial company history and published factory, product, application, quality and market information.
Open catalogOfficial directory for long-glass- and long-carbon-fiber reinforced thermoplastic compound families.
Open catalogOfficial data-sheet directory for selected PP, PA, PPS, TPU and other long-fiber compound grades.
Open catalogOfficial overview of material, design and process-engineering support across the product life cycle.
Open catalog