Advanced Technik Composite Corp. is presented as a source-reviewed supplier profile centered on Aircraft-grade carbon-fiber composite structures, with company-published capability separated from buyer-side verification requirements.
Advanced Technik Composite Corp. (ATCC) is headquartered in Changzhou, Jiangsu. Its official history says the business was established in July 2017 and changed its Chinese legal name from Changzhou Qifu Antai Composite Materials Technology Co., Ltd.—the name still used by the China Composites Expo listing—to on October 20, 2025. The current website focuses the group on aircraft-grade carbon-fiber composite structures for civil-aircraft subcontracting, low-altitude aircraft and high-end industrial applications. It says ATCC fully acquired Germany's COTESA GmbH and EC in 2018 and now operates a six-base, two-center footprint with global sales offices. These history, program, customer, qualification and footprint statements are company- or organizer-published and have not been independently verified by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for engineering and procurement teams comparing a finished FRP or composite component against a controlled drawing, service condition and inspection plan. It organizes Advanced Technik Composite Corp.'s published products, processes, certificate references and official sources around the primary topic “Advanced Technik Composite Corp. Aircraft-grade carbon-fiber composite structures.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Advanced Technik Composite Corp. currently lists 8 product or service groups and 7 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
ATCC's official website presents an integrated offering from structural design, strength analysis, process design and forming simulation, and tooling design through part manufacture and assembly and test validation. Its technology pages publish automated fiber or tape placement with an 8.5 m × 1.6 m placement area, hot-diaphragm forming, carbon-composite rotating structures, integrated fuel tanks and bonded all-composite wings. The expo profile adds civil-aircraft composite work packages and integrated structural design and manufacture for low-altitude and medium-to-large UAV programs. Published dimensions and performance statements are specific equipment or case claims and must not be generalized across every base or project. Buyers should identify the contracting entity, design authority and actual manufacturing plant, then qualify program confidentiality and export-control requirements; airworthiness and customer approvals; AS9100, Nadcap and ISO 17025 scope; material and approved-supplier lists; allowables; frozen storage and thaw control; lay-up and cure process; tooling and calibration; NDI; first-article inspection and AS9102; serial and batch traceability; CoC; deviation control; intellectual property; capacity; tool ownership; acceptance gates; lead time; and in-service support.
Evaluate Advanced Technik Composite Corp. as a potential composite product manufacturer for Aircraft-grade carbon-fiber composite structures, verify the public evidence and prepare a comparable RFQ.
Advanced Technik Composite Corp. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Composite frames, beams, ribs, boxes and other civil-aircraft work-package parts, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Advanced Technik Composite Corp. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Advanced Technik Composite Corp. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Carbon-fiber composite rotating bodies and drive shafts should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Advanced Technik Composite Corp.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Advanced Technik Composite Corp. publishes Composite structural design and strength analysis as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Process design, forming simulation and tooling design depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Automated prepreg fiber or tape placement, continuous cutting and hand lay-up is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Hot-diaphragm, autoclave, liquid-molding and compression-molding processes should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Advanced Technik Composite Corp. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Advanced Technik Composite Corp.'s public scope suggests a potential route for piping, tanks or corrosion-resistant process equipment. The RFQ should define service chemistry, temperature, pressure or stiffness class, liner, structural wall, joints, supports, nozzles, inspection and transport. Project-specific design and evidence remain necessary before the supplier can be treated as a fit.
Advanced Technik Composite Corp.'s reinforcement range can be screened for laminating, pultrusion, winding, molding or conversion programs. Buyers should confirm grade, sizing, architecture, width, tex or areal weight, package, splice and moisture limits, then run a representative processing trial before approving the material for repeat production.
Advanced Technik Composite Corp.'s tooling scope can be considered for new or replacement production tools. Buyers should release controlled product and interface drawings, material and process assumptions, critical datums, tool material and treatment, heating or flow requirements, trial conditions, acceptance measurements, ownership, maintenance and protected transport.
Advanced Technik Composite Corp.'s source record currently includes ATCC Official Website & Group Profile, ATCC Corporate Milestones, Integrated Composite Solutions, ATCC Technology Directory. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
The profile lists 2 company-published certification or test references. A listing is not the same as validation: request the complete current document, issuer, legal holder, production site, product and grade scope, standard edition, report specimen and validity date before citing it in a project or purchase order.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Changzhou Rixin Molding Technology Co., Ltd. is based in Zhulin, Jintan District, Changzhou, Jiangsu. Its official website says the company was founded in 2009 and develops, manufactures and sells SMC/BMC compounds and compression-molded parts. It also designs SMC production lines and provides integrated SMC/BMC technical services. Published applications include automotive, building materials, sanitary products, rail, agriculture, marine equipment, electric power, water infrastructure and new energy. The China Composites Expo lists the company as CHANGZHOU RIXIN SMC/BMC CO., LTD., while the Rixin Group English site uses Changzhou Rixin Molding Technology Co., Ltd. This is a standalone legal-company profile, separate from GetFRP's Changzhou Rixin Group exhibitor profile. Capacity, equipment, qualification and customer-validation statements are company- or organizer-published and have not been independently verified by GetFRP.
Zhejiang Huafeng New Material Co., Ltd. states on its official English website that it has developed, manufactured and sold new piping materials since 1998 and is headquartered in Hangzhou, Zhejiang. Its published range includes continuously wound GRP mortar and pressure pipe, GRP jacking pipe, water-supply, drainage and sewer pipe, FRP ductwork, flanges, tees, elbows, sleeves and manholes, plus communication and power cable protection pipe for municipal water, water infrastructure, petrochemical, marine and trenchless projects.
Official product catalogs, web directories and technical guides published by the supplier.
Current company name, establishment, core business, acquisition history and global footprint.
Open catalogOfficial 2025 legal-name change, site development, customer approvals and program milestones.
Open catalogOfficial directory for structures, strength, process, simulation, tooling, manufacture, assembly and validation.
Open catalogOfficial automated placement, hot-diaphragm, rotating-body, fuel-tank and all-composite-wing capabilities.
Open catalogPublished group and plant certification and customer-approval entry; validate by legal entity and site.
Open catalogOfficial Changzhou headquarters, Chinese bases, German plants and international sales offices.
Open catalogOrganizer profile published under the former Changzhou Qifu Antai name, covering establishment, business, programs and categories.
Open catalog