Andao Machinery Manufacturing (Shandong) is presented as a source-reviewed supplier profile centered on High-performance and special-fiber winding machines, with company-published capability separated from buyer-side verification requirements.
Andao Machinery Manufacturing (Shandong) Co., Ltd. is based in Dongying, Shandong. Its official site presents the company as a manufacturer of chemical-fiber winders, special-fiber winders, electromagnetic heating rollers, complete industrial-filament equipment and complete aramid-filament equipment. The current product directory further lists carbon-fiber winding machines, automatic glass-fiber winders, monofilament or tape winders, unwinding and rewinding units, and drawing, drying and calendering rollers. China Composites Expo lists the same entity at booth 6T68 for 2026 under fiber reprocessing and handling equipment. All capability and performance statements are company- or organizer-published and have not been independently subjected to factory acceptance testing or a site audit by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Andao Machinery Manufacturing (Shandong) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Andao Machinery Manufacturing (Shandong) High-performance and special-fiber winding machines.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Andao Machinery Manufacturing (Shandong) Co., Ltd. currently lists 6 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
The official catalog separates winding equipment for high-performance fibers, carbon fiber, monofilament or tape and special custom duties, and identifies constant-tension control and precision traverse winding as control approaches. Published examples include an SW320SG single-position winder with guide roll, twin-position automatic winders, automatic glass-fiber winders and spool winders. The aramid line navigation covers extrusion, spinning, washing, drying, oiling and winding systems, while complete industrial-filament lines are described as configurable from general-strength to high-strength filament targets. Equipment procurement should not rely on a product family name alone. An RFQ should define fiber chemistry and upstream feed state; monofilament, tow or tape dimensions; package type and finished weight; line speed; tension range and accuracy; traverse pitch; broken-end and splice handling; heating zones; solvent and corrosion conditions; explosion protection and safety interlocks; control-system make; data interfaces; utilities; footprint; and ambient requirements. The project should contract for customer-material trials, design review, factory and site acceptance testing, rate and yield criteria, commissioning spares, wear-part lists, software and drawing deliverables, operator training, remote support and warranty response. Aramid and carbon-fiber lines also require explicit review of material-contact surfaces, fuzz and dust control, static protection, closed-loop tension control, and cleanout or maintenance access. The reviewed pages do not expose a complete current certificate package sufficient to verify the legal entity, manufacturing address, scope, certificate number and validity, so none is recorded as independently verified. Request certificates, electrical drawings, critical-component lists and acceptance references for comparable equipment built at the quoted site.
No company-level certification is listed on this profile.
Evaluate Andao Machinery Manufacturing (Shandong) Co., Ltd. as a potential composite manufacturing equipment supplier for High-performance and special-fiber winding machines, verify the public evidence and prepare a comparable RFQ.
Andao Machinery Manufacturing (Shandong) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Carbon-fiber, glass-fiber and monofilament or tape winders, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Andao Machinery Manufacturing (Shandong) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Andao Machinery Manufacturing (Shandong) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
A useful RFQ for Complete industrial-filament spinning equipment should describe the buyer's application without disclosing unnecessary proprietary detail, then state the measurable product requirements. Compare Andao Machinery Manufacturing (Shandong) Co., Ltd.'s response against the same dimensions, quantity, inspection, documentation, Incoterm and delivery assumptions used for every shortlisted supplier.
Andao Machinery Manufacturing (Shandong) Co., Ltd. publishes Constant-tension winding control as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Precision traverse winding depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Aramid spinning-system integration is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Industrial-filament line configuration should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Andao Machinery Manufacturing (Shandong) Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Andao Machinery Manufacturing (Shandong) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Andao Machinery Manufacturing (Shandong) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Andao Machinery Manufacturing (Shandong) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Andao Machinery Manufacturing (Shandong) Co., Ltd.'s source record currently includes Official Andao Machinery Website, Andao Machinery Company Profile, Andao Machinery Product Center, Andao Machinery Contact Page. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-25. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official company identity, product navigation and contacts.
Open catalogOfficial Dongying manufacturer profile and principal equipment scope.
Open catalogOfficial directory for winders, aramid and industrial-filament lines and roller units.
Open catalogOfficial Dongying address, telephone and email.
Open catalogOrganizer entry for Andao Machinery at booth 6T68 and its fiber-handling equipment scope.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.