Changzhou Tentol Machinery Equipment is presented as a source-reviewed supplier profile centered on Thermoset dry- and wet-process prepreg lines, with company-published capability separated from buyer-side verification requirements.
Changzhou Tentol Machinery Equipment Co., Ltd. is based in Changzhou, Jiangsu; both the official logo and China Composites Expo use the English name TENTOL. The official website dates the company to 2009 and describes an integrated R&D, manufacturing, sales and service business. Its range covers composite prepreg-production and slitting equipment plus machinery for coated mat, electrical insulation, flexible decorative materials and gelatin sheet. China Composites Expo classifies the supplier under prepreg production or processing and finished-composite production equipment and publishes booth 8G21 for 2026. The website says equipment has been sold across nearly 30 Chinese provinces or municipalities and to markets including the United States, Japan and South Korea. These market, customer-application, patent and performance claims are company- or organizer-published and have not been independently verified by GetFRP. The current site is reachable over HTTP, while its HTTPS endpoint presents an invalid certificate; authenticate inquiries, contracts, beneficiary accounts and documents through multiple independent channels.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Changzhou Tentol Machinery Equipment Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Changzhou Tentol Machinery Equipment Thermoset dry- and wet-process prepreg lines.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Changzhou Tentol Machinery Equipment Co., Ltd. currently lists 8 product or service groups and 5 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Tentol's official composite-equipment directory lists thermoset dry and wet prepreg lines, a PEEK prepreg line, carbon/glass-fiber prepreg lines, prepreg-yarn or single-filament lines, resin-film coaters, and thermoset or thermoplastic prepreg pre-slitters and narrow-tape slitters. The website also says its prepreg laminator supports carbon, glass and basalt fibers, its coater supports hot-melt systems including epoxy, bismaleimide and cyanate ester, and example narrow-tape widths include 3.175, 6.35 and 12.7 mm. These are selection cues rather than acceptance guarantees. A line RFQ should define the incoming tow, fabric or UD-tape form; fiber and tow count; resin chemistry and viscosity/temperature window; target width and thickness; areal weight and resin content with tolerances; line speed; spread uniformity; tension range and accuracy; unwind and splicing; metered coating or impregnation method; zones and temperature accuracy; consolidation and air removal; release paper or film; cooling; inline inspection; edge trim and winding. PEEK and other thermoplastic systems also need maximum process temperature, melt residence, material temperature resistance, pressure and cooling capacity. Slitting equipment needs material thickness, tack, liner, blade type, minimum/maximum width, width and edge-quality tolerance, speed, tension, dust or trim handling and roll diameter. Project scope should cover utilities, solvent/VOC handling, ventilation, fire and explosion protection, occupational safety, cleanliness, PLC/HMI and data interfaces, destination machinery and electrical rules, building interfaces, installation, training, spares, remote support and warranty. Use agreed feedstock and target product to define FAT/SAT samples, run duration, capacity and yield basis, critical quality parameters, energy boundary, performance guarantees and shortfall remedies. The company and expo say ISO 9001, but the public qualification page does not expose a readable complete certificate number, legal entity, address, scope and validity, so it is not recorded as verified here; obtain the current certificate and validate it with the issuer.
No company-level certification is listed on this profile.
Evaluate Changzhou Tentol Machinery Equipment Co., Ltd. as a potential composite manufacturing equipment supplier for Thermoset dry- and wet-process prepreg lines, verify the public evidence and prepare a comparable RFQ.
Changzhou Tentol Machinery Equipment Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For Thermoplastic prepreg lines including PEEK applications, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Changzhou Tentol Machinery Equipment Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Changzhou Tentol Machinery Equipment Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Changzhou Tentol Machinery Equipment Co., Ltd. publishes Composite coating, impregnation, laminating and slitting-line design as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Special-purpose equipment manufacture, assembly and commissioning depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Thermoset and thermoplastic prepreg process-equipment integration is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating Unwind, spreading, tension, coating, heating, cooling and rewind integration should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Changzhou Tentol Machinery Equipment Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Changzhou Tentol Machinery Equipment Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Changzhou Tentol Machinery Equipment Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Changzhou Tentol Machinery Equipment Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Changzhou Tentol Machinery Equipment Co., Ltd.'s source record currently includes Tentol Official Website & Company Profile, Tentol Composite-Equipment Directory, Tentol Full Product Directory, China Composites Expo Tentol Profile. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Official identity, establishment, business scope, market statement and production display.
Open catalogOfficial prepreg-production, coating, prepreg-yarn and thermoset/thermoplastic slitting equipment.
Open catalogOfficial composite, coated-mat, insulation, slitting and general-equipment categories.
Open catalogOrganizer-published TENTOL identity, booth 8G21 and equipment categories.
Open catalogCompany qualification gallery; complete documents and validity require buyer verification.
Open catalogOfficial Changzhou address, phone numbers, domain email and inquiry channels.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.