Chengdu Zhengxi Intelligent Equipment is presented as a source-reviewed supplier profile centered on Composite Compression Molds, with company-published capability separated from buyer-side verification requirements.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. is based in Qingbaijiang, Chengdu, Sichuan. The official site says the Zhengxi brand began focusing on hydraulic-forming equipment in 2009 and that the group completed a shareholding reform in 2024. Its composites directory covers SMC, PCM, HP-RTM and carbon-fiber molding presses plus automated SMC, LFT-D, GMT and BMC/DMC compression lines, with wider automation, digital-workshop and smart-factory solutions. China Composites Expo lists the same mainland-China entity and publishes booth 8N08 for 2026 under finished-composite production systems, accessory equipment and tools, mold-related equipment and other equipment and tools. Establishment, group scale, project count, market coverage and technology-position statements are company- or organizer-published and have not been independently site-audited by GetFRP.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Chengdu Zhengxi Intelligent Equipment Group Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Chengdu Zhengxi Intelligent Equipment Composite Compression Molds.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. currently lists 8 product or service groups and 7 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
Zhengxi's official composites range separates SMC, PCM, HP-RTM and carbon-fiber presses from automated SMC, LFT-D, GMT and BMC/DMC lines. Its official composites solution describes servo systems, frame or four-column structures, process-data capture and traceability, and configurable cells such as SMC sheet cutting and weighing or BMC/DMC bulk-metering and portioning. These are supplier-published product and solution statements, not a substitute for a model-specific technical agreement. Build an RFQ backward from material and part: define SMC, BMC/DMC, GMT, LFT-D, thermoplastic prepreg, CFRP or HP-RTM chemistry; charge and resin state; maximum part and mold envelope and mass; annual volume and cycle time; required force; platen size; daylight; stroke; rapid approach, breathing, dwell and return profiles; permissible eccentric load; slide parallelism; position, pressure and temperature accuracy; mold heating/cooling; vacuum and injection interfaces; demolding and handling. Automated lines also need cutting, weighing, buffer, robot, conveyor, vision and guarding requirements; recipe management; MES, ERP or OPC-UA interfaces; and ownership of traceability data. HP-RTM projects should define closing force, injection pressure/flow, mixing and metering, mold temperature, vacuum, leak detection and interlocks in a joint interface matrix. Require foundation loads, layout, lifting and maintenance clearance, power/oil/cooling-water/compressed-air demand, key component makes, spare-parts list, software licensing, cybersecurity, remote-service access, training, warranty and lifecycle support. FAT/SAT should use the agreed mold, material and representative part, with continuous-run duration, cycle time, force and temperature curves, parallelism, dimensional/appearance/void or defect criteria, yield, traceability and remedies. The website displays broad ISO 9001, CE, military-quality and industry-leading promotional claims but does not expose complete current certificates sufficient to verify the shareholding company, address, scope, number, issuer and validity. Buyers should obtain and verify each certificate; none is recorded as verified here. Because the group site presents several member companies and manufacturing bases, the quotation, contract, invoice, beneficiary, exporter, manufacturer, installer, warranty and certification responsibility must identify the actual legal entity.
No company-level certification is listed on this profile.
Evaluate Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. as a potential composite manufacturing equipment supplier for SMC and PCM composite-molding hydraulic presses, verify the public evidence and prepare a comparable RFQ.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For HP-RTM high-pressure resin-transfer-molding presses, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. publishes Composite hydraulic-press engineering, manufacture and customization as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Servo-hydraulic and closed-loop force, speed and position control integration depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, SMC, BMC/DMC, LFT-D and GMT automated molding-line integration is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
Buyers evaluating HP-RTM press integration with injection, mold-temperature and automation interfaces should connect the process claim to evidence: an equipment list, controlled procedure, representative report, production photograph or witnessed sample may each answer a different risk. Chengdu Zhengxi Intelligent Equipment Group Co., Ltd. should also explain how the result is checked before release and recorded for the shipment.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Chengdu Zhengxi Intelligent Equipment Group Co., Ltd.'s source record currently includes Official Zhengxi Company Profile, Zhengxi Composite-Molding Equipment Directory, Zhengxi Composite-Molding Solution, Zhengxi Full-Range Product Catalog. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Changzhou Run Feng Yuan Textile Machinery Manufacturing Co., Ltd. is based in Benniu Town, Xinbei District, Changzhou, Jiangsu. Its official website and China Composites Expo profile both say the company was founded in 2002 and develops, manufactures, sells and services warp-knitting and stitch-bonding machinery. Its published composite-material equipment includes RSM multiaxial and biaxial warp-knitting machines, BS chopped-fiber and stitch-bonding equipment, and CFPL glass- and carbon-fiber pultrusion lines. The official site says it has developed more than 60 products across six series and provides domestic and international installation, training and technical service. Scale, output, recognition and equipment-performance statements are company- or organizer-published and have not been independently verified by GetFRP.
Nanjing Loyalty Composite Equipment Manufacture Co., Ltd. says it was established in 2000 to develop and manufacture composite-processing equipment and products. Its current directory covers crawler and hydraulic pultrusion machines, preforming dies, composite conductor-core lines, photovoltaic composite-frame lines, wind-blade spar-cap equipment and carbon-fiber products. The company reports a roughly 5,000 m² R&D center, ten development and test lines, more than 20 patented technologies, and sales to more than 20 countries and regions; buyers should independently verify these scale, intellectual-property and market-coverage statements.
Official product catalogs, web directories and technical guides published by the supplier.
Official group identity, 2009 operating origin, 2024 shareholding reform and business scope.
Open catalogOfficial SMC, PCM, HP-RTM, carbon-fiber press and automated-line directory.
Open catalogOfficial press architecture, servo, data-traceability and automation-cell description.
Open catalogOfficial catalog for equipment, automation, information systems and contact details.
Open catalogOrganizer-published matching identity, 2026 booth 8N08 and equipment categories.
Open catalogOfficial headquarters address, sales/service numbers and international-business email.
Open catalog