Dellahol CNC Technology (Suzhou) is presented as a source-reviewed supplier profile centered on CNC Profile and Five-Axis Machining Centers, with company-published capability separated from buyer-side verification requirements.
Dellahol CNC Technology (Suzhou) Co., Ltd. is the China Composites Expo English identity for, a CNC machine-tool and intelligent-equipment business in Changshu, Suzhou, Jiangsu, mainland China. The current exhibitor detail lists booth 6V23. GetFRP deduplicates Dellahol,, the exhibitor English name and dellahol.com into this one legal entity. The official site dates the Dellahol brand to 2018 and describes the Suzhou company as its R&D, manufacturing, sales and after-sales base, while multiple public registration references record the present legal entity as established on November 12, 2020. This profile therefore uses 2020 for the company and treats 2018 only as a company-published brand starting point. The official overview also publishes site, asset, employee and annual-capacity figures without a clear measurement basis or review date, so GetFRP does not place those figures in a verified scale field.
Is this your business?
Register or sign in to claim your company, update this public profile and respond to buyer inquiries.
This procurement profile is built for plant owners and process engineers comparing production scope, controls, commissioning responsibility and lifecycle support. It organizes Dellahol CNC Technology (Suzhou) Co., Ltd.'s published products, processes, certificate references and official sources around the primary topic “Dellahol CNC Technology (Suzhou) CNC Profile and Five-Axis Machining Centers.” The objective is to help a buyer decide whether to open a controlled RFQ, not to turn a broad company catalog into an unsupported approval.
Dellahol CNC Technology (Suzhou) Co., Ltd. currently lists 9 product or service groups and 6 manufacturing or support capabilities in this reviewed record. The public scope indicates what to investigate, while the buyer remains responsible for drawings, design calculations, standards, current certificates, sample approval and order-specific commercial confirmation. Claims below are attributed to the attached source set unless GetFRP explicitly labels them as qualification guidance.
China Composites Expo lists Dellahol as an equipment-and-tools exhibitor offering heavy-cutting, profile, CNC gantry, five-axis and aluminum-profile sawing centers plus robots. Official pages add vertical, drilling/tapping, drilling/milling and cutting families. The DJF compound five-axis page describes up to six-axis 3D motion, one-setup milling, drilling, tapping and chamfering, a BT40 spindle and 24-position magazine. The DLA gantry five-axis page lists a double swivel head, simultaneous five-axis motion, RTCP and an HSK63F interface. “Compound five-axis” is a machine name and is not evidence of verified carbon- or glass-fiber composite capability. Official pages explicitly name aluminum, steel, copper, aluminum-wood profiles and PVC. Although Dellahol exhibits at China Composites Expo and publishes aerospace and wind-energy sectors, this review found no current CFRP/GFRP-specific machine specification or acceptance result. Buyers must qualify material suitability through an RFQ and cutting trial. Supply a controlled drawing and model, material and sandwich construction, blank envelope and mass, datums, features, tolerances, finish, annual volume, cycle and loading method. Require the model, travels, table and fixture, spindle power, torque and speed, holder, magazine, control, RTCP, probing, compensation and wet or dry strategy. For glass- and carbon-fiber parts, confirm abrasive tooling and life, feeds and speeds, delamination and burr control, sandwich support, hole-exit quality, dust capture, airflow, filtration, grounding, explosion-risk review and conductive-carbon-dust segregation; a chip conveyor is not a composite-dust system. FAT should use representative material and tooling at the agreed cycle, checking dimensions, position, contour, holes, delamination, burrs, surface, dust escape, tool wear, recovery, alarms, interlocks and backup. The quality page says vibration, infrared, laser interferometry, CMM and vision equipment are used, but the offered machine still needs actual release records and calibration status. The official site claims use in China, Southeast Asia, Europe and Africa, but this is company-published. With no usable English site and a public 163.com email, export readiness is not confirmed. Reconfirm English contracts, manuals, drawings, safety files, payee and overseas support through official contacts. The honors page labels an ISO 9001 image, but readable data lacks a complete certificate number, scope, issuer and current validity, so none is recorded as verified. Generic national-standard wording is likewise excluded until a specific edition and acceptance value are agreed.
No company-level certification is listed on this profile.
Evaluate Dellahol CNC Technology (Suzhou) Co., Ltd. as a potential composite manufacturing equipment supplier for High-precision heavy-cutting machining centers, verify the public evidence and prepare a comparable RFQ.
Dellahol CNC Technology (Suzhou) Co., Ltd. includes this product in its published supply scope. Treat that listing as a starting point: request the current datasheet or drawing, material and construction, available grades or dimensions, guaranteed properties, production site, quotation revision and evidence that represents the exact item offered.
For CNC profile machining centers, buyers should convert the catalog description into an acceptance specification. Confirm standard and custom options, raw-material system, critical tolerances, surface or finish, test basis, sample route, MOQ, lead time and packing. Any alternative proposed by Dellahol CNC Technology (Suzhou) Co., Ltd. should be identified explicitly rather than treated as automatically equivalent.
This product broadens the supplier's public portfolio, but GetFRP does not infer approval from a product name alone. Ask Dellahol CNC Technology (Suzhou) Co., Ltd. for the grade or model designation, manufacturing route, current technical file, production and test location, batch traceability and the limits that apply to published performance values.
Dellahol CNC Technology (Suzhou) Co., Ltd. publishes CNC machining-center development, assembly and manufacturing as part of its capability scope. Buyers should ask which site and equipment perform the work, the practical size or material limits, the normal control records and whether the proposed order uses the same route. Subcontracted stages should be visible in the quality plan.
The relevance of Modular machine configuration and customer-specific design (company claim) depends on the requested product and acceptance criteria. During qualification, request a process flow, critical control points, inspection or test method, operator or equipment qualification where applicable, nonconformance handling and a recent example that represents the offered production route.
For sourcing purposes, Integrated milling, drilling, tapping, chamfering and sawing operations is a capability signal rather than independent verification. Confirm capacity, tooling or fixture availability, setup and changeover assumptions, lot definition, sample approval and traceability. The quotation should identify any limitation that could affect geometry, performance, appearance or delivery.
These are sourcing contexts suggested by the published product scope, not confirmed project references. Validate the exact application, design basis and evidence in the RFQ.
Dellahol CNC Technology (Suzhou) Co., Ltd.: The listed equipment can form part of a new production line, but machine selection should start from the product envelope, material system, throughput, utility and quality requirements. Ask the supplier to define every included station and the responsibility boundary for tooling, controls, guarding and downstream handling.
Dellahol CNC Technology (Suzhou) Co., Ltd.: For an expansion project, the buyer should document interfaces with existing creels, molds, heaters, cutters, extraction, material handling and plant controls. A factory acceptance test should use representative materials and demonstrate the agreed output and quality measures rather than only showing that individual motors run.
Dellahol CNC Technology (Suzhou) Co., Ltd.: Equipment value depends on installation, training, spares and troubleshooting after shipment. Confirm remote and on-site support, language, response time, software access, electrical documentation, consumables and the list of critical components that can be sourced in the destination market.
Dellahol CNC Technology (Suzhou) Co., Ltd.'s source record currently includes Official Dellahol Website, Official Dellahol Company Profile, DJF Compound Five-Axis Machining Center, DLA Gantry Five-Axis CNC Machining Center. These links let a buyer distinguish company-published information from GetFRP's own qualification guidance and return to the original context when a claim changes.
No company-level certification is presently listed in the reviewed profile. That does not prove that no document exists, but it means the RFQ should ask for the quality-system certificate and every product-specific test or approval needed by the buyer rather than assuming a certification from market reputation.
GetFRP last recorded a public-source review date of 2026-08-13. Public websites and catalogs can change after review, so commercial decisions should use newly downloaded files and direct supplier confirmation. GetFRP's public or claimed status describes profile ownership and identity controls; it does not certify every product statement or predict order performance.
Official product catalogs, web directories and technical guides published by the supplier.
Current legal identity, product families, service and company updates.
Open catalogBrand starting point, Suzhou production-base role, business and served sectors.
Open catalogCompany-published operations, spindle, tool magazine, materials and options.
Open catalogDouble swivel head, RTCP, HSK63F interface and five-axis operations.
Open catalogCompany-published machine and component measurement equipment and quality-system route.
Open catalogChangshu address, sales and service telephone and official-site email.
Open catalogCurrent Chinese and English identity, booth 6V23, product families and served sectors.
Open catalog
Nanjing Haoli Hydraulic Equipment Co., Ltd. states that it was founded in 1999 and entered the composites field in 2000. Its current official catalog covers hydraulic, servo-hydraulic and caterpillar-puller pultrusion machines plus pultrusion-winding, resin-injection, automatic cut-off, mat-cutting, take-up, braided-pultrusion cable-conduit and die equipment. The China Composites Expo N directory supports the exhibitor identity and FRP pultrusion-equipment scope. Haoli sells the machinery, tooling and process support used to manufacture composite profiles. The website's statement that a machine can pull glass- or carbon-fiber sections describes compatible workpieces; it is not evidence that Haoli supplies carbon fiber, fiberglass, pultruded profiles, conduits or other finished composites. GetFRP therefore does not assign material or finished-product demand keywords to this equipment profile.
Nabertherm Ltd. (Shanghai), identified in Chinese exhibition material as Nabertherm's Shanghai industrial-furnace company, is the China sales-company entry published on the current Nabertherm website. The reviewed official navigation covers air-circulation and drying ovens, radiation-heated chamber furnaces, high-temperature solutions, protective-gas and vacuum systems, laboratory muffle and tube furnaces, debinding and sintering systems, melting and holding furnaces, custom furnace engineering and process-control documentation. The China Composites Expo N directory independently supports the Shanghai exhibitor identity. This is an equipment profile: carbon fiber, fiberglass, resin, ceramic, metal powder or any other workpiece processed in a furnace is not a material manufactured by Nabertherm. The exhibition category also is not evidence that the Shanghai entity offers composite-curing autoclaves, so GetFRP does not publish an autoclave product or inject material-product keywords.
Lianyungang Weide Composite Materials Facilities Co., Ltd. says on its current official website that it was established in 2001 and develops and manufactures composite-production equipment. The published range covers continuous-filament-winding FRP pipe lines, high-pressure hydrogen-cylinder winding lines, four-axis and horizontal winding machines, high-pressure epoxy-pipe lines, centrifugal-casting GRP pipe lines, lighting-pole lines and supporting manipulators, curing ovens, resin-supply, intelligent feeding, conveying, joint-making and quality-assurance systems. China Composites Expo's L directory lists the matching exhibitor. Weide sells the machinery used to make pipes, cylinders and poles; those outputs are not presented as Weide-manufactured FRP or carbon-fiber products. GetFRP therefore excludes reinforcement, FRP-pipe and finished-cylinder supplier keywords. Capacity, performance, import-substitution, service-life and mechanical-property statements are supplier claims that must be validated against the quoted configuration, representative trials, FAT, SAT and contractual acceptance records.